I'm not sure what the XMM0 check was supposed to be, but the 0xCC008000 one is for the fifo and is handled elsewhere now (look for `optimizeGatherPipe`).
We currently have two different code paths for initializing controllers:
Either the frontend (DolphinQt) can do it, or if the frontend doesn't do
it, the core will do it automatically when booting. Having these two
paths has caused problems in the past due to only one frontend being
tested (see de7ef47548). I would like to get rid of the latter path to
avoid further problems like this.
This also changes the behavior for the invalid gamma value, which was confirmed to behave the same as 2.2.
Note that currently, the gamma value is only used for XFB copies, even though hardware testing indicates it also works for EFB copies. This will be changed in a later commit.
Before, Free Look would accept background input by default, which means it was easy to accidentally move the camera while typing in another window. (This is because HotkeyScheduler::Run sets the input gate to `true` after it's copied the hotkey state, supposedly for other threads (though `SetInputGate` uses a `thread_local` variable so I'm not 100% sure that's correct) and for the GBA windows (which always accept unfocused input, presumably because they won't be focused normally).
If a 64-bit register is passed to WriteConditionalExceptionExit,
the LDR instruction in it will read too much data. This seems
to be harmless right now, but causes problem in one of my PRs.
This should reduce (but not completely eliminate) gradual audio desyncs in dumps. This also allows for accurate sample rates for the GameCube.
Completely eliminating gradual audio desyncs will require resampling to an integer sample rate, as nothing seems to support a non-integer sample rate.
These values were obtained by setting a breakpoint at a game's entry point, and then observing the register values with Dolphin's register widget.
There are other registers that aren't handled by this PR, including CR, XER, SRR0, SRR1, and "Int Mask" (as well as most of the GPRs). They could be added in a later PR if it turns out that their values matter, but probably most of them don't.
This fixes Datel titles booting with the IPL skipped (see https://bugs.dolphin-emu.org/issues/8223), though when booted this way they are currently missing textures. Due to somewhat janky code, Datel overwrites the syscall interrupt handler and then immediately triggers it (with the `sc` instruction) before they restore the correct one. This works on real hardware due to icache, and also works in Dolphin when the IPL runs due to icache, but prior to this change `HID0.ICE` defaulted to 0 so icache was not enabled when the IPL was skipped.
DSPHLE::Initialize sets the halt and init bits to true (i.e. m_dsp_control.Hex starts as 0x804), which is reasonable behavior (this is the state the DSP will be in when starting a game from the IPL, as after `__OSStopAudioSystem` the control register is 0x804).
However, CMailHandler::m_halted defaults to false, and we only call CMailHandler::SetHalted in DSPHLE::DSP_WriteControlRegister when m_dsp_control.DSPHalt changes, so since DSPHalt defaults to true, if the first thing that happens is writing true to DSPHalt, we won't properly halt the mail handler.
Now, we call CMailHandler::SetHalted on startup. This fixes Datel titles when the IPL is skipped with DSP HLE (though this configuration only works once https://bugs.dolphin-emu.org/issues/8223 is fixed).
This fixes booting Datel titles with DSPHLE (see https://bugs.dolphin-emu.org/issues/12943). Datel messed up their DSP initialization code, so it only works by receiving a mail later on, but if halting isn't implemented then it receives the mail too early and hangs.
It's cleared whenever the uCode changes, so there's no reason to clear it in a destructor or during initialization.
I've also renamed it to ClearPending.
The # option means that 0x is prepended already, so the old code resulted in 0x0xDEADBEEF instead of the intended 0xDEADBEEF. WriteMailboxLow was already correct.
Before, both 1441 and 147f would disassemble as `lsr $acc0, #1`, when the second should be `lsr $acc0, #-1`, and both 14c1 and 14ff would be `asr $acc0, #1` when the second should be `asr $acc0, #-1`. I'm not entirely sure whether the minus signs actually make sense here, but this change is consistent with the assembler so that's an improvement at least.
devkitPro previously changed the formatting to not require negative signs for lsr and asr; this is probably something we should do in the future: 8a65c85c9b
This fixes the HermesText and HermesBinary tests (HermesText already wrote `lsr $ACC0, #-5`, so this is consistent with what it used before.)
For instance, ending with 0x009e (which you can do with CW 0x009e) indicates a LRI $ac0.m instruction, but there is no immediate value to load, so before whatever garbage in memory existed after the end of the file was used.
The bounds-checking also previously assumed that IRAM or IROM was being used, both of which were exactly 0x1000 long.
X30 is used in fewer situations than the comment was claiming.
(I think that when I wrote the comment I was counting the use of X30
as a temp variable in the slowmem code as clobbering X30, but that
happens after pushing X30, so it doesn't actually get clobbered.)
This is used when fastmem isn't available. Instead of always falling
back to the C++ code in MMU.cpp, the JIT translates addresses on its
own by looking them up in a table that Dolphin constructs. This is
slower than fastmem, but faster than the old non-fastmem code.
This is primarily useful for iOS, since that's the only major platform
nowadays where you can't reliably get fastmem. I think it would make
sense to merge this feature to master despite this, since there's
nothing actually iOS-specific about the feature. It would be of use
for me when I have to disable fastmem to stop Android Studio from
constantly breaking on segfaults, for instance.
Co-authored-by: OatmealDome <julian@oatmealdome.me>
Instead, saturate in OpReadRegister, as all uses of OpReadRegisterAndSaturate called OpReadRegister for other registers (and there isn't anything that writes to $ac0.m or $ac1.m without saturation).
There were 3 bugs here:
- The input register for the full register wasn't actually being used; it was read into RCX but RCX wasn't used by Update_SR_Register16_OverS32 (except as a scratch register). The way the DSP LLE recompiler uses registers is in general confusing, so this commit changes a few uses to have a variable for the register being used, to make code a bit more readable. (Default parameter values were also removed so that they needed to be explicitly specified).
- Update_SR_Register16 was doing a 64-bit test, when it should have been doing a 16-bit test. For the most part this doesn't matter due to sign-extension, but it does come up with e.g. `ORI` or `ANDI`.
- Update_SR_Register16_OverS32 did the over s32 check, and then called Update_SR_Register16. Update_SR_Register16 masks $sr with ~SR_CMP_MASK, clearing the over s32 bit. Now the over s32 check is performed after calling Update_SR_Register16 (without masking a second time). No official uCode cares about the over s32 bit.
We don't have anything called $amD, though we do have $acsD. However, these instructions affect flags based on the whole accumulator, so it's better to just use $acD.
For more information, ApplyWriteBackLog, WriteToBackLog, and ZeroWriteBackLog were added in b787f5f8f7 and the explanatory comment was added in fd40513fed, although it did not mention the specific instructions that could trigger this edge case. The statements about which registers can be written by main opcodes and extension opcodes are based on my own checking of all instructions in the manual.
It's been unused since DolphinWX was removed in 44b22c90df. Prior to that, it was used in Source/Core/DolphinWX/NetPlay/NetWindow.cpp. But the new equivalent in Source/Core/DolphinQt/NetPlay/NetPlayDialog.cpp uses NetPlayClient::GetPlayers instead. Stringifying (or creating a table, as is done now) should be done by the UI in any case.
Among other things, this trims trailing newline characters. Before (on windows) the \r would corrupt the output and make them very hard to understand (as the error message would be drawn over the code line, but part of the code line would peek out from behind it).
Page faults should only occur on architectures that support exception
handlers, so skip the test on other architectures to avoid spurious test
failures.
On GameCube, a ramp bit has no effect if its corresponding channel is
inactive. On Wii however, enabling just the ramp implicitly also enables
the channel. AXSetVoiceMix() never does that, so this commit should have
no impact on games unless they fiddle with the mixer control value
directly.
This refactorization is done just to match the order that I made
WriteToHardware use in 543ed8a. For WriteToHardware, it's important that
things like MMIO and gather pipe are handled before we reach a special
piece of code that only should get triggered for writes that hit memory
directly, but for ReadFromHardware we don't have any code like that.
This fixes a problem where Dolphin could crash if a non-translated
read crossed the end of a physical memory region.
The same change was applied to WriteToHardware in ecbce0a.
I think this is a relic of D3D9. D3D11 and D3D12 seem to work fine without it. Plus, ViewportCorrectionMatrix just didn't work correctly (at least with the viewports being generated by the new scissor code).
These aren't particularly useful, and make the code a bit more confusing. If for some reason someone wants to test what happens when these functions are disabled, it's easier to just edit the code that implements them. They aren't exposed in the UI, so one would need to restart Dolphin to do it anyways.
Currently, the axes for the main and C sticks range from 0-255, with
128 being the mid-point; but this isn't symmetrical: the negative axis
has 128 values not including 0, while the positive axis has 127 values
not including 0.
Normalizing so that the range is 1-255 makes the positive and negative
axes symmetrical. The inability to yield 0 shouldn't be an issue as a
real GC controller cannot yield it anyway.
This saves the GUI from having to manually call SDIO_EventNotify.
With that out of the way, we can let users change the
"Insert SD Card" setting on Android while a game is running.
Previously, when Pause at End of Movie was disabled, the game would continue running as it should, but the menu bar would think the game was paused, showing the play button instead of the pause button. To make things worse, clicking the play button would then restart the game, instead of pausing or doing nothing. F10 paused/unpaused as normal, though.
The old behavior was essentially to enable stepping/pause mode (via `CPU::Break()`) and then if Pause at End of Movie was disabled, to un-pause on the host thread (via `CPU::EnableStepping(false)`). For reasons which aren't entirely clear to me, the first one notified the menu bar (through the `Host::UpdateDisasmDialog` callback, not the `Settings::EmulationStateChanged` one), and the second did not. In any case, this approach does not particularly make sense; I don't see any reason to pause and unpause if Pause at End of Movie is disabled; instead, we should only pause when Pause at End of Movie is enabled.
This behavior was probably introduced in c1944f623b, though I haven't tested it.
In a code block where a guest register is accessed at least twice and the
last access is a write and the register is not discardable immediately
after the second-to-last instruction (perhaps there is an instruction
in between that can cause an exception), currently Dolphin's JITs will
flush the register after the second-to-last instruction.
It would be better if we replaced the flush after the second-to-last
instruction with a flush that only happens if the exception path is
taken. This change accomplishes that by marking guest registers as
"in use" not just when they are used as inputs but also when they are
used as outputs, preventing the loop in DoJit from flushing the
register until after the last access.
This makes codegen faster (by perhaps 10-20% in the case of Jit64,
I didn't measure too closely), which helps speed up NBA Live 2005
a little. But the game still has serious performance issues.
The DSP JIT only applies on x64, so if it doesn't work on esoteric compilers then that's not a problem. (And if it fails to compile, then it'll still produce an error on that platform, just no warnings on other platforms)
The size variable started to be unused when I created std::array variants of ReadArray, but we should follow it in case any files have fewer registers stored than they should (otherwise the remaining registers would end up with garbage data from later in the fifolog). Though, there probably aren't many fifologs where this is relevant.
* Disabled: disables the overlay pointer
* Follow: default behaviour, IR pointer follows touch position
* Drag: IR pointer moves relative to the initial touch event position
Currently, disabling mGBA when building gets rid of the ability to
change the GBA saves directory in DolphinQt, but it doesn't actually
get rid of Dolphin loading and storing the setting and creating the
folder. If the setting is set to a path you don't want to use
(perhaps you are trying to turn Dolphin portable), this is annoying.
To avoid accidentally making mistakes like this in the future,
I'm gating the existence of the setting behind an ifdef.
Fixes a crash that could occur if the static constructor function for
the MainSettings.cpp TU happened to run before the variables in
Common/Version.cpp are initialised. (This is known as the static
initialisation order fiasco.)
By using wrapper functions, those variables are now guaranteed to be
constructed on first use.
The fix in ef77872 worked for panic alerts from
the CPU thread, but there were still problems with
panic alerts from the GPU thread in dual core mode.
This change attempts to fix those.
Using unsigned char* or signed char* results in a deprecation warning, which is treated as an error. It needs to be casted to regular char* for it to work.
This matches BootManager.cpp's old behavior.
Note: The other settings of the "Controls" section (WiimoteSource
and WiimoteSourceBB) are still handled in BootManager.cpp.
The "DSP" game INI section name was supported by BootManager.cpp
before the section was ported to the new config system.
For backwards compatibility, we should keep supporting it.
Should fix https://bugs.dolphin-emu.org/issues/12792
This option has always existed since it's used by FifoCI, but now it can be changed at runtime. Looping is something that should almost always be on, but it can be useful to turn it off when frame-dumping is enabled so that hundreds of copies of the same frame aren't created. Before, turning it off required restarting Dolphin.
This extends the timeout to 30 seconds, so users who have brief
connection issues won't be so swiftly disconnected, allowing the
NetPlay session to continue.
These tends to get requested from either pure GDB or Ghidra. They reduce the verbosity of the communications. The QSupported packet is also important to implemnent for future proofing too.
The stub was made with the assumption that the GDB architecture is rs6000:6000, but the closest is actually powerpc:750 which features much more SPR that the gekko supports, but it also has slightly different ID. This commit now assumes the more proper powerpc:750.
It's always a good sign when the comments say "this will definitely
crash" and "I don't know if this is for a good reason".
Fixes https://bugs.dolphin-emu.org/issues/12762.
These GetPointer calls could cause crashes, in part because the
callers didn't do null checks and in part because GetPointer
inherently is unsafe to use for accesses larger than 1 byte.
The actual values don't matter since we overwrite all of the relevant fields, but other bits were not initialized (e.g. the top 12 bits of X10Y10), so the warning was semi-valid.
This piece of code is rather hard to understand, but my best guess
at what it's trying to do is that it tries to create opportunities
to skip writing CRs back to ppcState if we know that there are no
CR instructions (or branch instructions, etc) between an instruction
that writes to a CR register and the next blr. This is technically
inaccurate emulation, but as long as games don't do anything too
weird with their ABIs, I suppose it doesn't break anything.
So why do I want to get rid of it? Well, other than breaking some
hypothetical weird game, I imagine it could trip up people trying
to debug a game who are looking at the CR contents. And the code
is just plain confusing. (blr clearly doesn't write to CRs!)
Previously, EFB copies would be in the middle of other objects, as objects were only split on primitive data. A distinct object for each EFB copy makes them easier to spot, but does also mean there are more objects that do nothing when disabled (as disabling an object only skips primitive data, and there is no primitive data for EFB copies).
This also adds the commands after the last primitive data but before the next frame as a unique object; this is mainly just the XFB copy. It's nice to have these visible, though disabling the object does nothing since only primitive data is disabled and there is no primitive data in this case.
It became irrelevant in 952dfcd610, when the define was removed; now, the code the comment is referring to is in JitRegister.cpp, and oprofile is controlled by cmake.
My change in 867cd99 caused farcode to fill up much more than before.
Most games still ran fine, but certain games would have multiple
cache clears per minute, on top of being overall slow.
Maybe there's something prettier we can do about this than just
allocating more RAM, but we have the resource budget for making
Dolphin use more RAM, so I consider increasing the size of the
cache to be a good solution at least for the time being.
At least for Prince of Persia: The Forgotten Sands, 48 MB isn't
enough to stop the cache clears, but 64 MB is. (I only played the
game for a few minutes when testing, though.)
This fixes the bad rendering on the first frame when using the software renderer: the software renderer's Z buffer started out at 0, but most games clear it to 0xffffff instead; this means that things don't render correctly except for in the regions where the screen was cleared by an EFB copy earlier in the frame.
The system menu does clear the RTC flags, but we currently aren't updating the cache file, and since we clear them the system menu doesn't know to update the cache either. This means that launching a game via the system menu, and then launching a game directly and exiting via HOME will result in the system menu using an outdated cache and displaying the old game. This causes it to fail to launch the game on the disc channel (since it doesn't match the cache), resulting in it resetting (though it will ignore the cache after resetting). Not clearing the cache avoids this issue.
