Only allow test accepts for now. Use the CoinsViewTemporary to keep
track of coins created by each transaction so that subsequent
transactions can spend them. Uncache all coins since we only
ever do test accepts (Note this is different from ATMP which doesn't
uncache for valid test_accepts) to minimize impact on the coins cache.
Require that the input txns have no conflicts and be ordered
topologically. This commit isn't able to detect unsorted packages.
Allow CheckSequenceLocks to use heights and coins from any CoinsView and
CBlockIndex provided. This means that CheckSequenceLocks() doesn't need
to hold the mempool lock or cs_main. The caller is responsible for
ensuring the CoinsView and CBlockIndex are consistent before passing
them in. The typical usage is still to create a CCoinsViewMemPool from
the mempool and grab the CBlockIndex from the chainstate tip.
Feefilter option is debug only and it isn't used in any tests, it's wasteful
to check this option for every peer on every iteration of the message handler
loop. refs #21545
5f96d7d22d rpc: gettxoutsetinfo rejects hash_serialized_2 for specific height (Fabian Jahr)
23fe50436b test: Add test for coinstatsindex behavior in reorgs (Fabian Jahr)
90c966b0f3 rpc: Allow gettxoutsetinfo and getblockstats for stale blocks (Fabian Jahr)
b9362392ae index, rpc: Add use_index option for gettxoutsetinfo (Fabian Jahr)
bb7788b121 test: Test coinstatsindex robustness across restarts (Fabian Jahr)
e0938c2909 test: Add tests for block_info in gettxoutsetinfo (Fabian Jahr)
2501576ecc rpc, index: Add verbose amounts tracking to Coinstats index (Fabian Jahr)
655d929836 test: add coinstatsindex getindexinfo coverage, improve current tests (Jon Atack)
ca01bb8d68 rpc: Add Coinstats index to getindexinfo (Fabian Jahr)
57a026c30f test: Add unit test for Coinstats index (Fabian Jahr)
6a4c0c09ab test: Add functional test for Coinstats index (Fabian Jahr)
3f166ecc12 rpc: gettxoutsetinfo can be requested for specific blockheights (Fabian Jahr)
3c914d58ff index: Coinstats index can be activated with command line flag (Fabian Jahr)
dd58a4de21 index: Add Coinstats index (Fabian Jahr)
a8a46c4b3c refactor: Simplify ApplyStats and ApplyHash (Fabian Jahr)
9c8a265fd2 refactor: Pass hash_type to CoinsStats in stats object (Fabian Jahr)
2e2648a902 crypto: Make MuHash Remove method efficient (Fabian Jahr)
Pull request description:
This is part of the coinstats index project tracked in #18000
While the review of the new UTXO set hash algorithm (MuHash) takes longer recently #19328 was merged which added the possibility to run `gettxoutsetinfo` with a specific hash type. As the first type it added `hash_type=none` which skips the hashing of the UTXO set altogether. This alone did not make `gettxoutsetinfo` much faster but it allows the use of an index for the remaining coin statistics even before a new hashing algorithm has been added. Credit to Sjors for the idea to take this intermediate step.
Features summary:
- Users can start their node with the option `-coinstatsindex` which syncs the index in the background
- After the index is synced the user can use `gettxoutsetinfo` with `hash_type=none` or `hash_type=muhash` and will get the response instantly out of the index
- The user can specify a height or block hash when calling `gettxoutsetinfo` to see coin statistics at a specific block height
ACKs for top commit:
Sjors:
re-tACK 5f96d7d22d
jonatack:
Code review re-ACK 5f96d7d22d per `git range-diff 13d27b4 07201d3 5f96d7d`
promag:
Tested ACK 5f96d7d22d. Light code review ACK 5f96d7d22d.
Tree-SHA512: cbca78bee8e9605c19da4fbcd184625fb280200718396c694a56c7daab6f44ad23ca9fb5456d09f245d8b8d9659fdc2b3f3ce5e953c1c6cf4003dbc74c0463c2
844ad0ecca doc: IsSnapshotActive (James O'Beirne)
9b604c0207 validation: prepare VerifyDB for assumeutxo (James O'Beirne)
7901647d72 refactor: rename active_chainstate in VerifyDB (James O'Beirne)
Pull request description:
This is part of the [assumeutxo project](https://github.com/bitcoin/bitcoin/projects/11) (parent PR: #15606)
---
~~Pretty cut and dry; parameterizes `CVerifyDB` methods so that we can run the verify procedure on multiple chainstates.~~
Two minor tweaks to ensure that `VerifyDB` can be run on multiple chainstates and a corresponding rename.
ACKs for top commit:
fjahr:
Code review re-ACK 844ad0ecca
MarcoFalke:
review ACK 844ad0ecca🐥
Tree-SHA512: 26a398cf4dabc1aa0850743921dba0452b4813848a3c777586dc981716737e98e17b8110254a5c41af95dd236e0c00dc8b4eee891d69bef825a5e1911fc499d0
However, keep a declaration in validation to make it possible to move
smaller chunks to blockstorage without breaking compilation.
Also, expose AbortNode in the header.
Can be reviewed with --color-moved=dimmed-zebra --color-moved-ws=ignore-all-space
d831e711ca [validation] RewindBlockIndex no longer needed (Dhruv Mehta)
Pull request description:
Closes#17862
Context from [original comment](https://github.com/bitcoin/bitcoin/issues/17862#issuecomment-744285188) (minor edits):
`RewindBlockIndex()` is a mechanism to allow nodes to be upgraded after segwit activation, while still keeping their chainstate/datadir in a consistent state. It works as follows:
- A pre-segwit (i.e. v0.13.0 or older) node is running.
- Segwit activates. The pre-segwit node remains sync'ed to the tip, but is not enforcing the new segwit rules.
- The user upgrades the node to a segwit-aware version (v0.13.1 or newer).
- On startup, in `AppInitMain()`, `RewindBlockIndex()` is called. This walks the chain backwards from the tip, disconnecting and erasing blocks that from after segwit activation that weren't validated with segwit rules.
- those blocks are then redownloaded (with witness data) and validated with segwit rules.
This logic probably isn't required any more since:
- Segwit activated at height 481824, when the block chain was 130GB and the total number of txs was 250 million. Today, we're at height 667704, the blockchain is over 315GB and the total number of txs is over 600 million. Even if 20% of that added data is witness data (a high estimate), then around 150GB of transactions would need to be rewound to get back to segwit activation height. It'd probably be faster to simply validate from genesis, especially since we won't be validating any scripts before the assumevalid block. It's also unclear whether rewinding 150GB of transactions would even work. It's certainly never been tested.
- Bitcoin Core v0.13 is hardly used any more. https://luke.dashjr.org/programs/bitcoin/files/charts/software.html shows less than 50 nodes running it. The software was EOL on Aug 1st 2018. It's very unlikely that anyone is running 0.13 and will want to upgrade to 0.22.
This PR introduces `NeedsRedownload()` which merely checks for insufficiently validated segwit blocks and requests that the user restarts the node with `-reindex`. Reindexing the block files upon restart will make the node rebuild chain state and block index from the `blk*.dat` files on disk. The node won't be able to index the blocks with `BLOCK_OPT_WITNESS`, so they will be missing from the chain and be re-downloaded, with witness data.
Removing this code allows the following (done in follow-up #21090):
- removal of tests using `segwitheight=-1` in `p2p_segwit.py`.
- in turn, that allows us to drop support for `-segwitheight=-1`, which is only supported for that test.
- that allows us to always set `NODE_WITNESS` in our local services. The only reason we don't do that is to support `-segwitheight=-1`.
- that in turn allows us to drop all of the `GetLocalServices() & NODE_WITNESS` checks inside `net_processing.cpp`, since our local services would always include `NODE_WITNESS`
ACKs for top commit:
jnewbery:
utACK d831e711ca
jamesob:
ACK d831e711ca
laanwj:
Cursory code review ACK d831e711ca. Agree with the direction of the change, thanks for simplifying the logic here.
glozow:
utACK d831e711ca
Tree-SHA512: 3eddf5121ccd081ad7f15a5c6478ef867083edc8ba0bf1ee759e87bc070ee3d2f0698a3feba8db8dc087987c8452887b6f72cff05b3e178f41cb10a515fb8053
fadcd3f78e doc: Remove irrelevant link to GitHub (MarcoFalke)
fa121b628d blockstorage: [refactor] Use chainman reference where possible (MarcoFalke)
fa0c7d9ad2 move-only: Move *Disk functions to blockstorage (MarcoFalke)
fa91b2b2b3 move-only: Move AbortNode to shutdown (MarcoFalke)
fa413f07a1 move-only: Move ThreadImport to blockstorage (MarcoFalke)
faf843c07f refactor: Move load block thread into ChainstateManager (MarcoFalke)
Pull request description:
This picks up the closed pull request #21030 and is the first step toward fixing #21220.
The basic idea is to move all disk access into a separate module with benefits:
* Breaking down the massive files init.cpp and validation.cpp into logical units
* Creating a standalone-module to reduce the mental complexity
* Pave the way to fix validation related circular dependencies
* Pave the way to mock disk access for testing, especially where it is performance critical (like fuzzing)
ACKs for top commit:
promag:
Code review ACK fadcd3f78e, checked (almost) moved only changes. This is a nice tidy up change and doesn't change behavior. Easily reviewed commit by commit.
jamesob:
ACK fadcd3f78e ([`jamesob/ackr/21575.1.MarcoFalke.refactor_create_blocksto`](https://github.com/jamesob/bitcoin/tree/ackr/21575.1.MarcoFalke.refactor_create_blocksto))
ryanofsky:
Code review ACK fadcd3f78e. New organization makes sense, moves extraneous things outside of validation.cpp. PR is also easy to review with helpfully split up moveonly commits.
Tree-SHA512: 917996592b6d8f9998289d8cb2b1b78b23d1fdb3b07216c9caec1380df33baa09dc2c1e706da669d440b497e79c9c62a01ca20dc202df5ad974a75f3ef7a143b
ebc4ab721b refactor: post Optional<> removal cleanups (fanquake)
57e980d13c scripted-diff: remove Optional & nullopt (fanquake)
Pull request description:
Same rationale & motivation as #21404, which turned out to be quite low in the number of potential conflicts. Lets see what the bot has to say here.
ACKs for top commit:
practicalswift:
cr ACK ebc4ab721b: patch looks correct
jnewbery:
utACK ebc4ab721b
laanwj:
Code review ACK ebc4ab721b
Tree-SHA512: 550fbeef09b9d35ddefaa805d1755c18c8fd499c4b0f77ebfece8c20296a7abd1cf6c699e2261f92fe3552deeb7555ec2a2287ffe3ab9e98bb9f8612a4d43be3
84716b134e Add "index/blockfilterindex -> validation -> index/blockfilterindex" to expected circular dependencies (Jonas Schnelli)
ab3a0a2fb9 Add functional test for blockfilterindex in prune-mode (Jonas Schnelli)
c286a22f7b Add debug startup parameter -fastprune for more effective pruning tests (Jonas Schnelli)
5e112269c3 Avoid pruning below the blockfilterindex sync height (Jonas Schnelli)
00d57ff768 Avoid accessing nullpointer in BaseIndex::GetSummary() (Jonas Schnelli)
6abe9f5b11 Allow blockfilter in conjunction with prune (Jonas Schnelli)
Pull request description:
Maintaining the blockfilterindexes in prune mode is possible and may lead to efficient p2p based rescans of wallets (restore backups, import/sweep keys) beyond the prune height (rescans not part of that PR).
This PR allows running the blockfilterindex(es) in conjunction with pruning.
* Bitcoind/Qt will shutdown during startup when missing block data has been detected ([re]enable `-blockfilterindex` when we already have pruned)
* manual block pruning is disabled during blockfilterindex sync
* auto-pruning is delayed during blockfilterindex sync
ToDos:
* [x] Functional tests
ACKs for top commit:
fjahr:
Code review ACK 84716b1
ryanofsky:
Code review ACK 84716b134e. Only changes since last review were suggested new FindFilesToPrune argument and test.
benthecarman:
tACK 84716b134e
Tree-SHA512: 91d832c6c562c463f7ec7655c08956385413a99a896640b9737bda0183607fac530435d03d87c3c0e70c61ccdfe73fe8f3639bc7d26d33ca7e60925ebb97d77a
Values for mainnet and testnet will be specified in a follow-up PR that can be
scrutinized accordingly. This structure is required for use in snapshot activation
logic.
53e716ea11 [refactor] improve style for touched code (gzhao408)
174cb5330a [refactor] const ATMPArgs and non-const Workspace (gzhao408)
f82baf0762 [refactor] return MempoolAcceptResult (gzhao408)
9db10a5506 [refactor] clean up logic in testmempoolaccept (gzhao408)
Pull request description:
This is the first 4 commits of #20833, and does refactoring only. It should be relatively simple to review, and offers a few nice things:
- It makes accessing values that don't make sense (e.g. fee) when the tx is invalid an error.
- Returning `MempoolAcceptResult` from ATMP makes the interface cleaner. The caller can get a const instead of passing in a mutable "out" param.
- We don't have to be iterating through a bunch of lists for package validation, we can just return a `std::vector<MempoolAcceptResult>`.
- We don't have to refactor all ATMP call sites again if/when we want to return more stuff from it.
ACKs for top commit:
MarcoFalke:
ACK 53e716ea11💿
jnewbery:
Code review ACK 53e716ea11
ariard:
Code Review ACK 53e716e, I did tweak a bit the touched paths to see if we had good test coverage. Didn't find holes.
Tree-SHA512: fa6ec324a08ad9e6e55948615cda324cba176255708bf0a0a0f37cedb7a75311aa334ac6f223be7d8df3c7379502b1081102b9589f9a9afa1713ad3d9ab3c24f
This creates a cleaner interface with ATMP, allows us to make results const,
and makes accessing values that don't make sense (e.g. fee when tx is
invalid) an error.
Since these chainstates are:
1. Also vulnerable to the race condition described in the previous
commit
2. Documented as having similar semantics as m_active_chainstate
we should also protect them with ::cs_main.
[META] This commit should be followed up by removing the comments and
assertions meant only to show that the change is correct.
LoadExternalBlockFile mainly acts on CChainState.
[META] This commit should be followed up by removing the comments and
assertions meant only to show that the change is correct.
GetLastCheckPoint mainly acts on BlockManager.
[META] This commit should be followed up by removing the comments and
assertions meant only to show that the change is correct.
GetSpendHeight only acts on BlockManager.
[META] This commit should be followed up by removing the comments and
assertions meant only to show that the change is correct.
FindForkInGlobalIndex only acts on BlockManager.
Note to reviewers: Since FindForkInGlobalIndex is always called with
::ChainActive() as its first parameter, it is possible to move
FindForkInGlobalIndex to CChainState and remove this const CChain&
parameter to instead use m_chain. However, it seems like the original
intention was for FindForkInGlobalIndex to work with _any_ chain, not
just the current active chain. Let me know if this should be changed.
[META] This commit should be followed up by a scripted-diff commit which
fixes calls to LookupBlockIndex tree-wide.
[META] This commit should be followed up by removing the comments and
assertions meant only to show that the change is correct.
LookupBlockIndex only acts on BlockManager.
bb6fcc75d1 refactor: Drop boost::thread stuff in CCheckQueue (Hennadii Stepanov)
6784ac471b bench: Use CCheckQueue local thread pool (Hennadii Stepanov)
dba30695fc test: Use CCheckQueue local thread pool (Hennadii Stepanov)
01511776ac Add local thread pool to CCheckQueue (Hennadii Stepanov)
0ef938685b refactor: Use member initializers in CCheckQueue (Hennadii Stepanov)
Pull request description:
This PR:
- gets rid of `boost::thread_group` in the `CCheckQueue` class
- allows thread safety annotation usage in the `CCheckQueue` class
- is alternative to #14464 (https://github.com/bitcoin/bitcoin/pull/18710#issuecomment-616618525, https://github.com/bitcoin/bitcoin/pull/18710#issuecomment-617291612)
Also, with this PR (I hope) it could be easier to resurrect a bunch of brilliant ideas from #9938.
Related: #17307
ACKs for top commit:
laanwj:
Code review ACK bb6fcc75d1
LarryRuane:
ACK bb6fcc75d1
jonatack:
Code review ACK bb6fcc75d1 and verified rebase to master builds cleanly with unit/functional tests green
Tree-SHA512: fddeb720d5a391b48bb4c6fa58ed34ccc3f57862fdb8e641745c021841c8340e35c5126338271446cbd98f40bd5484f27926aa6c3e76fa478ba1efafe72e73c1
281fd1a4a0 Replace KeyIDHasher with SaltedSipHasher (Andrew Chow)
210b693db6 Add generic SaltedSipHasher (Andrew Chow)
95e61c1cf2 Move Hashers to util/hasher.{cpp/h} (Andrew Chow)
Pull request description:
There are existing `SaltedOutPointHasher` and `SaltedTxidHasher` classes used for `std::unordered_map` and `std::unordered_set` that could be useful in other places in the codebase. So we these to their own `saltedhash.{cpp/h}` file. An existing `KeyIDHasher` is moved there too. Additionally, `ScriptIDHasher`, `SaltedPubkeyHasher`, and `SaltedScriptHasher` are added so that they can be used in future work.
`KeyIDHasher` and `ScriptIDHasher` are not salted so that equality comparisons of maps and sets keyed by `CKeyID` and `CScriptID` will actually work.
Split from #19602 (and a few other PRs/branches I have).
ACKs for top commit:
laanwj:
Code review ACK 281fd1a4a0
jonatack:
ACK 281fd1a4a0, code review, debug build and ran bitcoind after rebasing to master @ dff0f6f753
fjahr:
utACK 281fd1a4a0
Tree-SHA512: bb03b231ccf3c9ecefc997b8da9c3770af4819f9be5b0a72997a103864e84046a2ac39b8eadf0dc9247bdccd53f86f433642e3a098882e6748341a9e7736271b
5021810650 Make CanFlushToDisk a const member function (practicalswift)
281cf99554 Do not run functions with necessary side-effects in assert() (practicalswift)
Pull request description:
Do not run functions with necessary side-effects in `assert()`.
ACKs for top commit:
laanwj:
Code review ACK 5021810650
sipa:
utACK 5021810650
theStack:
Code Review ACK 5021810650🟢
Tree-SHA512: 38b7faccc2f16a499f9b7b1b962b49eb58580b2a2bbf63ea49dcc418a5ecc8f21a0972fa953f66db9509c7239af67cfa2f9266423fd220963d091034d7332b96
This moves the CBlockPolicyEstimator to the NodeContext, which get rids
of two globals and allows us to conditionally create the
CBlockPolicyEstimator (and to remove a circular dep).
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
Move the hashers that we use for hash tables to a common place.
Moved hashers:
- SaltedTxidHasher
- SaltedOutpointHasher
- FilterHeaderHasher
- SignatureCacheHasher
- BlockHasher
72a1d5c6f3 validation: Remove review-only comments + assertions (Carl Dong)
3756853b15 docs: Move FindFilesToPrune{,Manual} doxygen comment (Carl Dong)
485899a93c style: Make FindFilesToPrune{,Manual} match style guide (Carl Dong)
3f5b5f3f6d validation: Move FindFilesToPrune{,Manual} to BlockManager (Carl Dong)
f8d4975ab3 validation: Move PruneOneBlockFile to BlockManager (Carl Dong)
74f73c783d validation: Pass in chainman to UnloadBlockIndex (Carl Dong)
4668ded6d6 validation: Move ~CMainCleanup logic to ~BlockManager (Carl Dong)
Pull request description:
This PR paves the way for de-globalizing `g_chainman` entirely by removing the usage of `g_chainman` in the following functions/methods:
- `~CMainCleanup`
- `CChainState::FlushStateToDisk`
- `UnloadBlockIndex`
The remaining direct uses of `g_chainman` are as follows:
1. In initialization codepaths:
- `AppTests`
- `AppInitMain`
- `TestingSetup::TestingSetup`
2. `::ChainstateActive`
3. `LookupBlockIndex`
- Note: `LookupBlockIndex` is used extensively throughout the codebase and require a much larger set of changes, therefore I've left it out of this initial PR
ACKs for top commit:
MarcoFalke:
re-ACK 72a1d5c6f3👚
jnewbery:
utACK 72a1d5c6f3
Tree-SHA512: 944a4fa8405eecf39706ff944375d6824373aaeea849d11473f08181eff26b12f70043a8348a5b08e6e9021b243b481842fbdfbc7c3140ca795fce3688b7f5c3
[META] No behaviour change is intended in this commit.
[META] This commit should be followed up by removing the comments and
assertions meant only to show that the change is correct.
Also stop FindFilesToPrune{,Manual} from unnecessary reaching for
::ChainActive() by passing in the necessary information.
[META] This is a pure refactor commit.
Move PruneBlockFile to BlockManager because:
1. PruneOneBlockFile only acts on BlockManager
2. Eliminates the need for callers (FindFilesToPrune{,Manual}) to have a
reference to the larger ChainstateManager, just a reference to
BlockManager is enough. See following commits.
~CMainCleanup:
1. Is vestigial
2. References the g_chainman global (we should minimize g_chainman refs)
3. Only acts on g_chainman.m_blockman
4. Does the same thing as BlockManager::Unload
ea74e10acf doc: Add best practice for annotating/asserting locks (Hennadii Stepanov)
2ee7743fe7 sync.h: Make runtime lock checks require compile-time lock checks (Anthony Towns)
23d71d171e Do not hide compile-time thread safety warnings (Hennadii Stepanov)
3ddc150857 Add missed thread safety annotations (Hennadii Stepanov)
af9ea55a72 Use LockAssertion utility class instead of AssertLockHeld() (Hennadii Stepanov)
Pull request description:
On the way of transit from `RecursiveMutex` to `Mutex` (see #19303) it is crucial to have run-time `AssertLockHeld()` assertion that does _not_ hide compile-time Clang Thread Safety Analysis warnings.
On master (65e4ecabd5) using `AssertLockHeld()` could hide Clang Thread Safety Analysis warnings, e.g., with the following patch applied:
```diff
--- a/src/txmempool.h
+++ b/src/txmempool.h
@@ -607,7 +607,7 @@ public:
void addUnchecked(const CTxMemPoolEntry& entry, setEntries& setAncestors, bool validFeeEstimate = true) EXCLUSIVE_LOCKS_REQUIRED(cs, cs_main);
void removeRecursive(const CTransaction& tx, MemPoolRemovalReason reason) EXCLUSIVE_LOCKS_REQUIRED(cs);
- void removeForReorg(const CCoinsViewCache* pcoins, unsigned int nMemPoolHeight, int flags) EXCLUSIVE_LOCKS_REQUIRED(cs, cs_main);
+ void removeForReorg(const CCoinsViewCache* pcoins, unsigned int nMemPoolHeight, int flags) EXCLUSIVE_LOCKS_REQUIRED(cs_main);
void removeConflicts(const CTransaction& tx) EXCLUSIVE_LOCKS_REQUIRED(cs);
void removeForBlock(const std::vector<CTransactionRef>& vtx, unsigned int nBlockHeight) EXCLUSIVE_LOCKS_REQUIRED(cs);
```
Clang compiles the code without any thread safety warnings.
See "Add missed thread safety annotations" commit for the actual thread safety warnings that are fixed in this PR.
ACKs for top commit:
MarcoFalke:
ACK ea74e10acf 🎙
jnewbery:
ACK ea74e10acf
ajtowns:
ACK ea74e10acf
Tree-SHA512: 8cba996e526751a1cb0e613c0cc1b10f027a3e9945fbfb4bd30f6355fd36b9f9c2e1e95ed3183fc254b42df7c30223278e18e5bdb5e1ef85db7fef067595d447
f19fdd47a6 test: add test for CChainState::ResizeCoinsCaches() (James O'Beirne)
8ac3ef4699 add ChainstateManager::MaybeRebalanceCaches() (James O'Beirne)
f36aaa6392 Add CChainState::ResizeCoinsCaches (James O'Beirne)
b223111da2 txdb: add CCoinsViewDB::ChangeCacheSize (James O'Beirne)
Pull request description:
This is part of the [assumeutxo project](https://github.com/bitcoin/bitcoin/projects/11):
Parent PR: #15606
Issue: #15605
Specification: https://github.com/jamesob/assumeutxo-docs/tree/master/proposal
---
In the assumeutxo implementation draft (#15056), once a UTXO snapshot is loaded, a new chainstate object is created after initialization. This means that we have to reclaim some of the cache that we've allocated to the original chainstate (per `dbcache=`) to repurpose for the snapshot chainstate.
Furthermore, it makes sense to have different cache allocations depending on which chainstate is more active. While the snapshot chainstate is working to get to the network tip (and the background validation chainstate is idle), it makes sense that the snapshot chainstate should have the majority of cache allocation. And contrariwise once the snapshot has reached network tip, most of the cache should be given to the background validation chainstate.
This set of changes (detailed in the commit messages) allows us to dynamically resize the various coins caches. None of the functionality introduced here is used at the moment, but will be in the next AU PR (which introduces `ActivateSnapshot`).
`ChainstateManager::MaybeRebalanceCaches()` defines the (somewhat normative) cache allocations between the snapshot and background validation chainstates. I'd be interested in feedback if anyone has thoughts on the proportions I've set there.
ACKs for top commit:
ajtowns:
weak utACK f19fdd47a6 -- didn't find any major problems, but not super confident that I didn't miss anything
fjahr:
Code review ACK f19fdd4
ryanofsky:
Code review ACK f19fdd47a6. Only change since last review is constructor cleanup (no change in behavior). I think the suggestions here from ajtowns and others are good, but shouldn't delay merging the PR (and hold up assumeutxo)
Tree-SHA512: fffb7847fb6993dd4a1a41cf11179b211b0b20b7eb5f7cf6266442136bfe9d43b830bbefcafd475bfd4af273f5573500594aa41fff03e0ed5c2a1e8562ff9269
Also adds CCoinsViewCache::ReallocateCache() to attempt to free
memory that the cacheCoins's allocator may be hanging onto when
downsizing the cache.
Adds `CChainState::m_coins{tip,db}_cache_size_bytes` data members
so that we can reference cache size on a per-chainstate basis for
flushing.
faec3dc2ad init: Remove boost from ThreadImport (MarcoFalke)
Pull request description:
Can be tested by calling `-reindex` or `-loadblock` and then pressing `CTRL`+`C`.
Should print something like:
```
...
2020-04-27T19:34:31Z [loadblk] Reindexing block file blk00005.dat...
^C2020-04-27T19:34:32Z [loadblk] Shutdown requested. Exit ThreadImport
2020-04-27T19:34:32Z [qt-init] Interrupting HTTP server
...
```
ACKs for top commit:
laanwj:
Code review ACK faec3dc2ad
hebasto:
ACK faec3dc2ad, tested on Linux Mint 19.3 (x86_64) both `bitcoind` and `bitcoin-qt` binaries.
Tree-SHA512: e105af18d98296d82ec99f48e478cf44577e3c32f7e4b47617a7bc7cbf71d6becb92722f229a1be38d58ad29712704509ad9740d8ab8cd3104cf90057664b437
Per BIP 141, the witness commitment structure is atleast 38 bytes,
OP_RETURN (0x6a) + 36 (0x24) + 4 byte header (0xaa21a9ed) + 32 byte
SHA256 hash. It can be longer, however any additional data has no
consensus meaning.
I'd previously attempted to create a specialized lock for ChainstateManager,
but it turns out that because that lock would be required for functions like
ChainActive() and ChainstateActive(), it created irreconcilable lock inversions
since those functions are used so broadly throughout the codebase.
Instead, I'm just using cs_main to protect the contents of g_chainman.
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
ChainstateManager is responsible for creating and managing multiple
chainstates, and will provide a high-level interface for accessing the
appropriate chainstate based upon a certain use.
Incorporates feedback from Marco Falke. Additional documentation written
by Russ Yanofsky.
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
This parameter is unused, but in future commits will allow ChainstateManager to
differentiate between chainstates created from a UTXO snapshot from those that
weren't.
-BEGIN VERIFY SCRIPT-
# Delete outdated alias for RecursiveMutex
sed -i -e '/CCriticalSection/d' ./src/sync.h
# Replace use of outdated alias with RecursiveMutex
sed -i -e 's/CCriticalSection/RecursiveMutex/g' $(git grep -l CCriticalSection)
-END VERIFY SCRIPT-
This separates out some logic for detecting how full the coins cache is from
FlushStateToDisk. We'll want to reuse this logic when deciding when to flush
the coins cache during UTXO snapshot activation.
Commit d449772cf6 stopped setting
COINBASE_FLAGS, and it looks like it hasn't been used since P2SH.
Update the help string to remove "flags", which is not specified in
BIP 22.
5506ecfe7a [refactor] Replace global int nScriptCheckThreads with bool (John Newbery)
d9957623b4 [tests] Don't use TestingSetup in the checkqueue_tests (John Newbery)
Pull request description:
The meaning of this value is confusing. Refactor it and add comments.
ACKs for top commit:
sipa:
ACK 5506ecfe7a
promag:
ACK 5506ecfe7a, only change was addressing my nits.
laanwj:
Code review ACK 5506ecfe7a
MarcoFalke:
ACK 5506ecfe7a🥐
Tree-SHA512: 78536727c98d2c23f3c0f3f169131474fef9a4486ae65029011caf06eab30f6f70ff73a65b2fb04a5d969fc1150858d1c6ea4767f04d48c1eea6b829316d0e63
The global nScriptCheckThreads int is confusing and is only needed for
its int-ness in AppInitMain. Move all `-par` parsing logic there and
replace the int nScriptCheckThreads with a bool
g_parallel_script_checks.
Also tidy up logic and improve comments.
92b2f5306b test: add dumptxoutset RPC test (James O'Beirne)
c1ccbc3dde devtools: add utxo_snapshot.sh (James O'Beirne)
57cf74c991 rpc: add dumptxoutset (James O'Beirne)
92fafb3a7d coinstats: add coins_count (James O'Beirne)
707fde7b9b add unused SnapshotMetadata class (James O'Beirne)
Pull request description:
This is part of the [assumeutxo project](https://github.com/bitcoin/bitcoin/projects/11):
Parent PR: #15606
Issue: #15605
Specification: https://github.com/jamesob/assumeutxo-docs/tree/master/proposal
---
This changeset defines the serialization format for UTXO snapshots and adds an RPC command for creating them, `dumptxoutset`. It also adds a convenience script for generating and verifying snapshots at a certain height, since that requires doing a hacky rewind of the chain via `invalidateblock`.
All of this is unused at the moment.
ACKs for top commit:
laanwj:
ACK 92b2f5306b
Tree-SHA512: 200dff87767f157d627e99506ec543465d9329860a6cd49363081619c437163a640a46d008faa92b1f44fd403bfc7a7c9e851c658b5a4849efa9a34ca976bf31
9075d13153 [docs] Add release notes for removal of REJECT reasons (John Newbery)
04a2f326ec [validation] Fix REJECT message comments (John Newbery)
e9d5a59e34 [validation] Remove REJECT code from CValidationState (John Newbery)
0053e16714 [logging] Don't log REJECT code when transaction is rejected (John Newbery)
a1a07cfe99 [validation] Fix peer punishment for bad blocks (John Newbery)
Pull request description:
We no longer send BIP 61 REJECT messages, so there's no need to set
a REJECT code in the CValidationState object.
Note that there is a minor bug fix in p2p behaviour here. Because the
call to `MaybePunishNode()` in `PeerLogicValidation::BlockChecked()` only
previously happened if the REJECT code was > 0 and < `REJECT_INTERNAL`,
then there are cases were `MaybePunishNode()` can get called where it
wasn't previously:
- when `AcceptBlockHeader()` fails with `CACHED_INVALID`.
- when `AcceptBlockHeader()` fails with `BLOCK_MISSING_PREV`.
Note that `BlockChecked()` cannot fail with an 'internal' reject code. The
only internal reject code was `REJECT_HIGHFEE`, which was only set in
ATMP.
This reverts a minor bug introduced in 5d08c9c579.
ACKs for top commit:
ariard:
ACK 9075d13, changes since last reviewed are splitting them in separate commits to ease understanding and fix nits
fjahr:
ACK 9075d13153, confirmed diff to last review was fixing nits in docs/comments.
ryanofsky:
Code review ACK 9075d13153. Only changes since last review are splitting the main commit and updating comments
Tree-SHA512: 58e8a1a4d4e6f156da5d29fb6ad6a62fc9c594bbfc6432b3252e962d0e9e10149bf3035185dc5320c46c09f3e49662bc2973ec759679c0f3412232087cb8a3a7
e78aaf41f4 [docs] Add release notes for burying bip 9 soft fork deployments (John Newbery)
8319e738f9 [tests] Add coverage for the content of getblockchaininfo.softforks (James O'Beirne)
0328dcdcfc [Consensus] Bury segwit deployment (John Newbery)
1c93b9b31c [Consensus] Bury CSV deployment height (John Newbery)
3862e473f0 [rpc] Tidy up reporting of buried and ongoing softforks (John Newbery)
Pull request description:
This hardcodes CSV and segwit activation heights, similar to the BIP 90 buried deployments for BIPs 34, 65 and 66.
CSV and segwit have been active for over 18 months. Hardcoding the activation height is a code simplification, makes it easier to understand segwit activation status, and reduces technical debt.
This was originally attempted by jl2012 in #11398 and again by me in #12360.
ACKs for top commit:
ajtowns:
ACK e78aaf41f4 ; checked diff to previous acked commit, checked tests still work
ariard:
ACK e78aaf4, check diff, run the tests again and successfully activated csv/segwit heights on mainnet as expected.
MarcoFalke:
ACK e78aaf41f4 (still didn't check if the mainnet block heights are correct, but the code looks good now)
Tree-SHA512: 7e951829106e21a81725f7d3e236eddbb59349189740907bb47e33f5dbf95c43753ac1231f47ae7bee85c8c81b2146afcdfdc11deb1503947f23093a9c399912
i.e. any CoinsViews members. Adds a lock acquisition to `gettxoutsetinfo` RPC
to comply with added annotations.
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
This change encapsulates UTXO set data within CChainState instances, removing
global data `pcoinsTip` and `pcoinsviewdb`. This is necessary if we want to
maintain multiple chainstates with their own rendering of the UTXO set.
We introduce a class CoinsViews which consolidates the construction of a
CCoins* hierarchy. Construction of its various pieces (db, coinscatcher,
in-memory cache) is split up so that we avoid flushing bad state to disk if
startup is interrupted.
We also introduce `CChainState::CanFlushToDisk()` which tells us when it is
safe to flush the chainstate based on this partial construction.
This commit could be broken into smaller pieces, but it would require more
ephemeral diffs to, e.g., temporarily change CCoinsViewDB's constructor
invocations.
Other changes:
- A parameter has been added to the CCoinsViewDB constructor that allows the
name of the corresponding leveldb directory to be specified.
Thanks to Russell Yanofsky and Marco Falke for helpful feedback.
50cede3f5a [mempool] Allow one extra single-ancestor transaction per package (Matt Corallo)
Pull request description:
This implements the proposed policy change from [1], which allows
certain classes of contract protocols involving revocation
punishments to use CPFP. Note that some such use-cases may still
want some form of one-deep package relay, though even this alone
may greatly simplify some lightning fee negotiation.
[1] https://lists.linuxfoundation.org/pipermail/bitcoin-dev/2018-November/016518.html
ACKs for top commit:
ajtowns:
ACK 50cede3f5a -- looked over code again, compared with previous commit, compiles, etc.
sdaftuar:
ACK 50cede3f5a
ryanofsky:
utACK 50cede3f5a. Changes since last review: adding EXTRA_DESCENDANT_TX_SIZE_LIMIT constant, changing max ancestor size from 1,000,000 to nLimitAncestorSize constant (101,000), fixing test comment and getting rid of unused test node.
Tree-SHA512: b052c2a0f384855572b4579310131897b612201214b5abbb225167224e4f550049e300b471dbf320928652571e92ca2d650050b7cf39ac92b3bc1d2bcd386c1c
bead32e31e Add release notes for DEFAULT_BLOOM change (Matt Corallo)
f27309f55c Move DEFAULT_PEERBLOOMFILTERS from validation.h to net_processing.h (Matt Corallo)
5efcb77283 Disable bloom filtering by default. (Matt Corallo)
Pull request description:
BIP 37 bloom filters have been well-known to be a significant DoS
target for some time. However, in order to provide continuity for
SPV clients relying on it, the NODE_BLOOM service flag was added,
and left as a default, to ensure sufficient nodes exist with such a
flag.
NODE_BLOOM is, at this point, well-established and, as long as
there exist 0.18 nodes with default config (which I'd anticipate
will be true for many years), will be available from some peers. By
that time, the continued slowdown of BIP 37-based filtering will
likely have rendered it useless (though this is already largely the
case). Further, BIP 37 was deliberately never updated to support
witness-based filtering as newer wallets are expected to migrate to
some yet-to-be-network-exposed filters.
ACKs for top commit:
jnewbery:
ACK bead32e31e
kallewoof:
ACK bead32e31e
Tree-SHA512: ecd901898e8efe1a7c82b471af0acc2373c2282ac633eb58d9aae7c35deda1999d0f79fb0485e6cecbda7246aeda00206cd82c7fa36866e2ac64705ba93f9390
This implements the proposed policy change from [1], which allows
certain classes of contract protocols involving revocation
punishments to use CPFP. Note that some such use-cases may still
want some form of one-deep package relay, though even this alone
may greatly simplify some lightning fee negotiation.
[1] https://lists.linuxfoundation.org/pipermail/bitcoin-dev/2018-November/016518.html
Separate out the management of chain-agnostic block metadata from any given
CChainState instance. This allows us to avoid duplicating data like
`mapBlockIndex` unnecessarily for multiple chainstates.
This also adds a CChainState constructor that accepts and sets m_blockman.
Ultimately this reference will point to a BlockMan instance that
is shared across CChainStates.
This commit can be decomposed into smaller commits if necessary.
fa2b083c3f [test] Add test to check mempool consistency in case of reorgs (MarcoFalke)
fabeb1f613 validation: Add missing mempool locks (MarcoFalke)
fa0c9dbf91 txpool: Make nTransactionsUpdated atomic (MarcoFalke)
Pull request description:
Take the mempool read lock during reorgs, so that we don't accidentally read an inconsistent mempool.
ACKs for top commit:
laanwj:
code review ACK fa2b083c3f
ryanofsky:
utACK fa2b083c3f [EDIT: was ~e284e422e75189794e24fe482819d8b1407857c3~, from bad copy and paste]. Changes since last review: rebase after #15976, adding vTxHashes lock annotation, adding new commit dropping mempool lock for nTransactionsUpdated and making it atomic to avoid deadlock between mempool lock and g_best_block_mutex
Tree-SHA512: cfe7777993589087753e000e3736d79d320dca412383fb77b56bef8946a04049722bf888c11b6f722adf677165185c7e58b4a269f7c5fa25e84dda375f6c8a7d
At this point there is no reasonable excuse to disable opt-in RBF,
and, unlike when this option was added, there are now significant
issues created when disabling it (in the form of compact block
reconstruction failures). Further, it breaks a lot of modern wallet
behavior.
BIP 37 bloom filters have been well-known to be a significant DoS
target for some time. However, in order to provide continuity for
SPV clients relying on it, the NODE_BLOOM service flag was added,
and left as a default, to ensure sufficient nodes exist with such a
flag.
NODE_BLOOM is, at this point, well-established and, as long as
there exist 0.18 nodes with default config (which I'd anticipate
will be true for many years), will be available from some peers. By
that time, the continued slowdown of BIP 37-based filtering will
likely have rendered it useless (though this is already largely the
case). Further, BIP 37 was deliberately never updated to support
witness-based filtering as newer wallets are expected to migrate to
some yet-to-be-network-exposed filters.
403e677c9 refactoring: IsInitialBlockDownload -> CChainState (James O'Beirne)
3ccbc376d refactoring: FlushStateToDisk -> CChainState (James O'Beirne)
4d6688603 refactoring: introduce ChainstateActive() (James O'Beirne)
d7c97edee move-only: make the CChainState interface public (James O'Beirne)
Pull request description:
This is part of the [assumeutxo project](https://github.com/bitcoin/bitcoin/projects/11):
Parent PR: #15606
Issue: #15605
Specification: https://github.com/jamesob/assumeutxo-docs/tree/2019-04-proposal/proposal
---
This changeset starts moving functionality intimately related to CChainState into methods. Parameterizing these functions by a particular CChainState is necessary for the use of multiple chainstates simultaneously (e.g. for asynchronous background validation).
In this change, we
- make the CChainState interface public - since other units will start to invoke its methods directly,
- introduce `::ChainstateActive()`, the CChainState equivalent for `::ChainActive()`,
- and move `IsInitialBlockDownload()` and `FlushStateToDisk()` into methods on CChainState.
Independent of assumeutxo, these changes better encapsulate chainstate behavior and allow easier use from a testing context.
There are more methods that we'll move in the future, but they require other substantial changes (i.e. moving ownership of the `CCoinsView*` hierarchy into CChainState) so we'll save them for future PRs.
---
The first move-only commit is most easily reviewed with `git diff ... --color-moved=dimmed_zebra`.
ACKs for commit 403e67:
Empact:
utACK 403e677c9e no need to address my nits herein
Sjors:
utACK 403e677
ryanofsky:
utACK 403e677c9e. Only change since previous review is removing global state comment as suggested.
MarcoFalke:
utACK 403e677c9e, though the diff still seems a bit bloated with some unnecessary changes in the second commit.
promag:
utACK 403e677 and rebased with current [master](c7cfd20a7).
Tree-SHA512: 6fcf260bb2dc201361170c0b4547405366f5f331fcc3a2bac29b24442814b7b244ca1b58aac5af716885f9a130c343b544590dff780da0bf835c7c5b3ccb2257
Also renames global methods for clarity:
- ::FlushStateToDisk() -> CChainState::ForceFlushStateToDisk()
- This performs an unconditional flush.
- ::PruneAndFlush() -> CChainState::PruneAndFlush()
along with DisconnectResult, and CBlockIndexWorkComparator.
The CChainState interface needs to be known to the rest of the system because
many global functions will move to CChainState methods. This is to allow
other parts of the system to be parameterized per chainstate instance
instead of assuming a single global.
62d50ef308 Add LOCKS_EXCLUDED(cs_main) to LimitValidationInterfaceQueue(...) which does AssertLockNotHeld(cs_main) (practicalswift)
Pull request description:
This PR adds compile-time checking for negative locking requirements that follow from the run-time locking requirement `AssertLockNotHeld(cs_main)` in `LimitValidationInterfaceQueue(...)`.
Changes:
* Add `LOCKS_EXCLUDED(cs_main)` to `LimitValidationInterfaceQueue(...)` which does `AssertLockNotHeld(cs_main)`
* Add `LOCKS_EXCLUDED(cs_main)` to `CChainState::ActivateBestChain(…)`, `CChainState:: InvalidateBlock(…)` and `CChainState::RewindBlockIndex(…)` which all call `LimitValidationInterfaceQueue(...)` which does `AssertLockNotHeld(cs_main)`
* Add `LOCKS_EXCLUDED(cs_main)` to `InvalidateBlock(…)` which calls `CChainState::InvalidateBlock(...)` which in turn calls `LimitValidationInterfaceQueue(...)` which does `AssertLockNotHeld(cs_main)`
* Add `LOCKS_EXCLUDED(cs_main)` to `RewindBlockIndex(…)` which calls `CChainState::RewindBlockIndex(...)` which in turn calls `LimitValidationInterfaceQueue(...)` which does `AssertLockNotHeld(cs_main)`
ACKs for commit 62d50e:
MarcoFalke:
utACK 62d50ef308
Tree-SHA512: 73d092ccd08c851ae3c5d60370c369fc030c5793f5507e2faccb6f91c851ddc0ce059fbea3899f2856330d7a8c78f2ac6a2988e8268b03154f946be9e60e3be1
Add LOCKS_EXCLUDED(cs_main) to functions calling LimitValidationInterfaceQueue(...) which does AssertLockNotHeld(cs_main)
Add LOCKS_EXCLUDED(cs_main) to functions calling CChainState::InvalidateBlock(...) which calls LimitValidationInterfaceQueue(...) which in turn does AssertLockNotHeld(cs_main)
Add LOCKS_EXCLUDED(cs_main) to functions calling CChainState::RewindBlockIndex(...) which calls LimitValidationInterfaceQueue(...) which in turn does AssertLockNotHeld(cs_main)
Though at the moment ChainActive() simply references `g_chainstate.m_chain`,
doing this change now clears the way for multiple chainstate usage and allows
us to script the diff.
-BEGIN VERIFY SCRIPT-
git grep -l "chainActive" | grep -E '(h|cpp)$' | xargs sed -i '/chainActive =/b; /extern CChain& chainActive/b; s/\(::\)\{0,1\}chainActive/::ChainActive()/g'
-END VERIFY SCRIPT-
effe81f750 Move g_is_mempool_loaded into CTxMemPool::m_is_loaded (Ben Woosley)
bb8ae2c419 rpc: Expose g_is_mempool_loaded via getmempoolinfo and /rest/mempool/info.json (Ben Woosley)
Pull request description:
And use it to fix a race condition in mempool_persist.py:
https://travis-ci.org/Empact/bitcoin/jobs/487577243
Since e.g. getrawmempool returns errors based on this status, this
enables users to test it for readiness.
Fixes#12863
ACKs for commit effe81:
MarcoFalke:
utACK effe81f750
jnewbery:
utACK effe81f750
Tree-SHA512: 74328b0c17a97efb8a000d4ee49b9a673c2b6dde7ea30c43a6a2eff961a233351c9471f9a42344412135786c02bdf2ee1b2526651bb8fed68bd94d2120c4ef86
This work is prerequisite to attaching thread names to log lines and deadlock
debug utilities. This code allows setting of an "internal" threadname per
thread on platforms where thread_local is available.
This commit also moves RenameThread() out of a more general module and adds a
numeric suffix to disambiguate between threads with the same name. It
explicitly names a few main threads using the new util::ThreadRename().
5c759c73b2 [wallet] Move maxTxFee to wallet (John Newbery)
Pull request description:
Closes#15355
Moves the `-maxtxfee` from the node to the wallet. See discussion in issue for details.
This is a cleanup. There is no change in behaviour.
Completes #15620
ACKs for commit 5c759c:
MarcoFalke:
utACK 5c759c73b2
ryanofsky:
utACK 5c759c73b2. Changes since last review: updated commit message and an error message and method name.
meshcollider:
utACK 5c759c73b2
Tree-SHA512: 2f9b2729da3940a5cda994d3f3bc11ee1a52fcc1c5e9842ea0ea63e4eb0300e8416853046776311298bc449ba07554aa46f0f245ce28598a5b0bd7347c12e752
This commit moves the maxtxfee setting to the wallet. There is only
one minor behavior change:
- an error message in feebumper now refers to -maxtxfee instead of
maxTxFee.
c7efb652f3 blockfilter: Update BIP 158 test vectors. (Jim Posen)
19308c9e21 rpc: Add getblockfilter RPC method. (Jim Posen)
ff35105096 init: Add CLI option to enable block filter index. (Jim Posen)
accc8b8b18 index: Access functions for global block filter indexes. (Jim Posen)
2bc90e4e7b test: Unit test for block filter index reorg handling. (Jim Posen)
6bcf0998c0 test: Unit tests for block index filter. (Jim Posen)
b5e8200db7 index: Implement lookup methods on block filter index. (Jim Posen)
75a76e3619 index: Implement block filter index with write operations. (Jim Posen)
2ad2338ef9 serialize: Serialization support for big-endian 32-bit ints. (Jim Posen)
ba6ff9a6f7 blockfilter: Functions to translate filter types to/from names. (Jim Posen)
62b7a4f094 index: Ensure block locator is not stale after chain reorg. (Jim Posen)
4368384f1d index: Allow atomic commits of index state to be extended. (Jim Posen)
Pull request description:
This introduces a new BlockFilterIndex class, which is required for BIP 157 support.
The index is uses the asynchronous BaseIndex infrastructure driven by the ValidationInterface callbacks. Filters are stored sequentially in flat files and the disk location of each filter is indexed in LevelDB along with the filter hash and header. The index is designed to ensure persistence of filters reorganized out of the main chain to simplify the BIP 157 net implementation.
Stats (block height = 565500):
- Syncing the index from scratch takes 45m
- Total index size is 3.8 GiB
ACKs for commit c7efb6:
MarcoFalke:
utACK c7efb652f3
ryanofsky:
Slightly tested ACK c7efb652f3 (I just rebuilt the index with the updated PR and tested the RPC). Changes since last review: rebase, fixed compile errors in internal commits, new comments, updated error messages, tweaked cache size logic, renamed commit method, renamed constants and globals, fixed whitespace, extra BlockFilterIndex::Init error check.
Tree-SHA512: f8ed7a9b6f76df45933aa5eba92b27b3af83f6df2ccb3728a5c89eec80f654344dc14f055f6f63eb9b3a7649dd8af6553fe14969889e7e2fd2f8461574d18f28
Adds the following util units and adds them to libbitcoin_util:
- `util/url.cpp` takes `urlDecode` from `httpserver.cpp`
- `util/error.cpp` takes `TransactionErrorString` from
`node/transaction.cpp` and `AmountHighWarn` and `AmountErrMsg` from
`ui_interface.cpp`
- `util/fees.cpp` takes `StringForFeeReason` and `FeeModeFromString` from `policy/fees.cpp`
- `util/rbf.cpp` takes `SignalsOptInRBF` from `policy/rbf.cpp`
- 'util/validation.cpp` takes `FormatStateMessage` and `strMessageMagic` from 'validation.cpp`
This moves the following policy settings functions and globals to a new
src/policy/settings unit in lib_server:
- `incrementalRelayFee`
- `dustRelayFee`
- `nBytesPerSigOp`
- `fIsBareMultisigStd`
These settings are only required by the node and should not be accessed
by other libraries.
519b0bc5dc Make last disconnected block BLOCK_FAILED_VALID, even when aborted (Pieter Wuille)
8d220417cd Optimization: don't add txn back to mempool after 10 invalidates (Pieter Wuille)
9ce9c37004 Prevent callback overruns in InvalidateBlock and RewindBlockIndex (Pieter Wuille)
9bb32eb571 Release cs_main during InvalidateBlock iterations (Pieter Wuille)
9b1ff5c742 Call InvalidateBlock without cs_main held (Pieter Wuille)
241b2c74ac Make RewindBlockIndex interruptible (Pieter Wuille)
880ce7d46b Call RewindBlockIndex without cs_main held (Pieter Wuille)
436f7d735f Release cs_main during RewindBlockIndex operation (Pieter Wuille)
1d342875c2 Merge the disconnection and erasing loops in RewindBlockIndex (Pieter Wuille)
32b2696ab4 Move erasure of non-active blocks to a separate loop in RewindBlockIndex (Pieter Wuille)
9d6dcc52c6 Abstract EraseBlockData out of RewindBlockIndex (Pieter Wuille)
Pull request description:
This PR makes a number of improvements to the InvalidateBlock (`invalidateblock` RPC) and RewindBlockIndex functions, primarily around breaking up their long-term cs_main holding. In addition:
* They're made safely interruptible (`bitcoind` can be shutdown, and no progress in either will be lost, though if incomplete, `invalidateblock` won't continue after restart and will need to be called again)
* The validation queue is prevented from overflowing (meaning `invalidateblock` on a very old block will not drive bitcoind OOM) (see #14289).
* `invalidateblock` won't bother to move transactions back into the mempool after 10 blocks (optimization).
This is not an optimal solution, as we're relying on the scheduler call sites to make sure the scheduler doesn't overflow. Ideally, the scheduler would guarantee this directly, but that needs a few further changes (moving the signal emissions out of cs_main) to prevent deadlocks.
I have manually tested the `invalidateblock` changes (including interrupting, and running with -checkblockindex and -checkmempool), but haven't tried the rewinding (which is probably becoming increasingly unnecessary, as very few pre-0.13.1 nodes remain that would care to upgrade).
Tree-SHA512: 692e42758bd3d3efc2eb701984a8cb5db25fbeee32e7575df0183a00d0c2c30fdf72ce64c7625c32ad8c8bdc56313da72a7471658faeb0d39eefe39c4b8b8474
6f6514a080 Correct units for "-dbcache" and "-prune" (Hennadii Stepanov)
Pull request description:
Actually, all `dbcache`-related values in the code are measured in MiB (not in megabytes, MB) or in bytes (e.g., `nTotalCache`).
See: https://github.com/bitcoin/bitcoin/blob/master/src/txdb.hba8c8b2227/src/init.cpp (L1405-L1424)
Also, "-prune" is fixed:
1. The GUI values in GB are translated to the node values in MiB correctly.
2. The maximum of the "prune" `QSpinBox` is not limited by default value of 99 (GB).
Fix: #15106
Tree-SHA512: 151ec43b31b1074db8b345fedb1dcc10bde225899a5296bfc183f57e1553d13ac27db8db100226646769ad03c9fcab29d88763065a471757c6c41ac51108459d
04da9f4834 [RPC] Update getrawtransaction interface (Amiti Uttarwar)
Pull request description:
- stop checking unspent UTXOs for a transaction when txindex is not enabled, as per conversation here: https://github.com/bitcoin/bitcoin/issues/3220#issuecomment-377458383
- code contributed by sipa
Tree-SHA512: aa07353bccc14b81b7803992a25d076d6bc06d15ec7c1b85828dc10aea7e0498d9b49f71783e352ab8a14b0bb2010cfb7835de3dfd1bc6f2323f460449348e66
All dbcache-related values in the code are measured in MiB (not in
megabytes, MB) or in bytes.
The GUI "-prune" values in GB are translated to the node values in MiB
correctly. The maximum of the "-prune" QSpinBox is not limited by the
default value of 99 (GB).
Also, this improves log readability.
bf2e01097 uint256: Remove unnecessary crypto/common.h use (Karl-Johan Alm)
Pull request description:
This is an alternative to #13242 which keeps the `ReadLE64` part, but moves the `crypto/common.h` dependency into `crypto/common.h` as a function outside of `uint256`.
**Reason:** this change will remove dependencies for `uint256` to `crypto/common.h`, `compat/endian.h`, and `compat/byteswap.h`.
This PR removes the need to update tests to be endian-aware/-independent, but keeps the (arguably dubious) `ReadLE64` part (which was only introduced to fix the tests, not for any functionality).
Tree-SHA512: 78b35123cdb185b3b3ec59aba5ca8a5db72624d147f2d6a5484ffa5ce626a72f782a01dc6893fc8f5619b03e2eae7b5a03b0df5d43460f3bda428e719e188aec
fa511e8dad Pass tx pool reference into CheckSequenceLocks (MarcoFalke)
Pull request description:
`CheckSequenceLocks` is called from ATMP and the member function `CTxMemPool::removeForReorg` without passing in the tx pool object that is used in those function's scope and instead using the global `::mempool` instance.
This fix should be refactoring only, since currently there is only one (global) tx pool in normal operation. Though, it fixes hard to track down issues in future settings where more than one mempool exists at a time. (E.g. for tests, rpc or p2p tx relay purposes)
Tree-SHA512: f0804588c7d29bb6ff05ec14f22a16422b89ab31ae714f38cd07f811d7dc7907bfd14e799c4c1c3121144ff22711019bbe9212b39e2fd4531936a4119950fa49
Call sync.h primitives "locks" and "mutexes" instead of "blocks" and "waitable
critical sections" to match current coding conventions and c++11 standard
names.
This PR does not rename the "CCriticalSection" class (though this could be done
as a followup) because it is used everywhere and would swamp the other changes
in this PR. Plain mutexes should mostly be preferred instead of recursive
mutexes in new code anyway.
-BEGIN VERIFY SCRIPT-
set -x
set -e
ren() { git grep -l $1 | xargs sed -i s/$1/$2/; }
ren CCriticalBlock UniqueLock
ren CWaitableCriticalSection Mutex
ren CConditionVariable std::condition_variable
ren cs_GenesisWait g_genesis_wait_mutex
ren condvar_GenesisWait g_genesis_wait_cv
perl -0777 -pi -e 's/.*typedef.*condition_variable.*\n\n?//g' src/sync.h
-END VERIFY SCRIPT-
3fc20632a3 qt: Set BLOCK_CHAIN_SIZE = 220 (DrahtBot)
2b6a2f4a28 Regenerate manpages (DrahtBot)
eb7daf4d60 Update copyright headers to 2018 (DrahtBot)
Pull request description:
Some trivial maintenance to avoid having to do it again after the 0.17 branch off.
(The scripts to do this are in `./contrib/`)
Tree-SHA512: 16b2af45e0351b1c691c5311d48025dc6828079e98c2aa2e600dc5910ee8aa01858ca6c356538150dc46fe14c8819ed8ec8e4ec9a0f682b9950dd41bc50518fa
d45b344ffd Bucket for inbound when scheduling invs to hide tx time (Gleb)
Pull request description:
It has been brought up to my attention that current random delays mechanism (originally intended to obfuscate transaction metadata) allows to easily estimate the time a transaction was received by a node.
It may be done by connecting multiple observer nodes to the same node. Each of those nodes will generate its own schedule of delays. Combined metadata regarding those events from different sources allows an observer to estimate transaction time.
After this patch a spy won't gain additional information by just creating multiple connections to a target.
Tree-SHA512: c71dae5ff350b614cb40a8e201fd0562d3e03e3e72a5099718cd451f0d84c66d5e52bbaf0d5b4b75137514c8efdedcc6ef4df90142b360153f04ad0721545ab1
25bc9615b7 Document validationinterace callback blocking deadlock potential. (Matt Corallo)
Pull request description:
From the branches-I've-had-lying-around-and-forgot-to-PR department...
This is a comment-only PR, but the comments point out an API quirk that isn't exactly trivial. None of our use-cases right now hit this, but if we were to call SyncWithValidationInterfaceQueue (eg to limit queue depth) in ATMP, I'm pretty sure we'd hit a deadlock there.
Tree-SHA512: 889dd8fc9eb15d1f2aa5ca467e783bc8f07bc543b166b032741795b0db7a0df11a2846d3cb7c69bafa8d1acf970021001b742f52be06725a932813230c5b4a7b
In `ProcessGetBlockData`, send the block data directly from disk if
type MSG_WITNESS_BLOCK is requested. This is a valid shortcut as the
on-disk format matches the network format.
This is expected to increase performance because a deserialization and
subsequent serialization roundtrip is avoided.
4a6c0e3dcf Modernize best block mutex/cv/hash variable naming (Pieter Wuille)
45dd135039 Fix csBestBlock/cvBlockChange waiting in rpc/mining (Pieter Wuille)
Pull request description:
This is an alternative to #11694.
It reintroduces a uint256 variable with the best block hash, protected by csBestBlock, and only updated while holding it.
Also rename the involved variable to modern guidelines, as there are very few uses.
Tree-SHA512: 826a86c7d3cee7fe49f99f4398ae99e81cb0563197eaeba77306a3ca6072b67cdb932bc35720fc0f99c2a57b218efa029d0b8bdfb240591a629b2e90efa3199d
a5bca13 Bugfix: Include <memory> for std::unique_ptr (Luke Dashjr)
Pull request description:
Not sure why all these includes were missing, but it's breaking builds for some users:
https://bugs.gentoo.org/show_bug.cgi?id=652142
(Added to all files with a reference to `std::unique_ptr`)
Tree-SHA512: 8a2c67513ca07b9bb52c34e8a20b15e56f8af2530310d9ee9b0a69694dd05e02e7a3683f14101a2685d457672b56addec591a0bb83900a0eb8e2a43d43200509
b55555d rpc: Add testmempoolaccept (MarcoFalke)
Pull request description:
To check if a single raw transaction makes it into the current transaction pool, one had to call `sendrawtransaction`. However, on success, this adds the transaction to the mempool with no easy way to undo.
The call `testmempoolaccept` is introduced to provide a way to solely check the result without changing the mempool state.
Tree-SHA512: 5afd9311190135cee8fc1f229c7d39bf893f1028f29e28d34f70df820198ff97b4bf86b41cbbd6e6c36a5c30073cefa92d541c74a4939c7a2a6fa283dfd41b63
adc2586 doc: Refer to witness reserved value as spec. in the BIP (MarcoFalke)
Pull request description:
BIP141 refers to the coinbase's input's witness that consists of a single 32-byte array as "witness reserved value".
This updates the code to follow the BIP
Tree-SHA512: 49c9463519bd11b9ff322eeecd638f7627aa8efdfb869f8549f9a160ff34281e1b5a0b9d83545a692de6f5ff795055292c423403b0f3ce7597e3f32273cf1deb
a192636 -blocksdir: keep blockindex leveldb database in datadir (Jonas Schnelli)
f38e4fd QA: Add -blocksdir test (Jonas Schnelli)
386a6b6 Allow to optional specify the directory for the blocks storage (Jonas Schnelli)
Pull request description:
Since the actual block files taking up more and more space, it may be desirable to have them stored in a different location then the data directory (use case: SSD for chainstate, etc., HD for blocks).
This PR adds a `-blocksdir` option that allows one to keep the blockfiles and the blockindex external from the data directory (instead of creating symlinks).
I fist had an option to keep the blockindex within the datadir, but seems to make no sense since accessing the index will (always) lead to access (r/w) the block files.
Tree-SHA512: f8b9e1a681679eac25076dc30e45e6e12d4b2d9ac4be907cbea928a75af081dbcb0f1dd3e97169ab975f73d0bd15824c00c2a34638f3b284b39017171fce2409
22fddde Avoid calling GetSerializeSize on each tx in a block if !fTxIndex (Matt Corallo)
2862aca Move some additional variables into CChainState private (Matt Corallo)
fd4d80a Create initial CChainState to hold chain state information (Matt Corallo)
e104f0f Move block writing out of AcceptBlock (Matt Corallo)
50701ba Move txindex/undo data disk location stuff out of ConnectBlock (Matt Corallo)
93a34cf Make DisconnectBlock unaware of where undo data resides on disk (Matt Corallo)
Pull request description:
CChainState should eventually, essentially, be our exposed "libconsensus", but we're probably a few releases away, so the real goal is to clarify our internal interfaces. The main split was a big step, but validation.cpp is still a somewhat ranomly-mixed bag of functions that are pure functions which validate inputs (which should probably either merge with their callers or move into another file in consensus/), read/write data from disk, manipulate our current chain state (which moves into CChainState), and do mempool transaction validation.
Obviously this is only a small step, but some effort is made to clean up what functions the functions in CChainState call, and obviously as things are added its easy to keep clear "CChainState::* cannot call anything except via callbacks through CValidationInterface, pure functions, or disk read/write things". Right now there are some glaring violations in mempool callbacks, and general flushing logic needs cleaning up (FlushStateToDisk maybe shouldnt be called, and there should be an API towards setDirtyBlockIndex, but I'll leave that for after @sipa's current changesets land).
Tree-SHA512: 69b8ec191b36b19c9492b4dee74c8057621fb6ec98ad219e8da0b2ed5c3ad711b10b5af9ff1117e8807ccf88918eeeab573be8448baecc9a59f099c53095985b
de74c62 [Doc] Update bip.md, add support for BIP 159 (Jonas Schnelli)
e054d0e [QA] Add node_network_limited test (Jonas Schnelli)
bd09416 Avoid leaking the prune height through getdata (fingerprinting countermeasure) (Jonas Schnelli)
27df193 Always set NODE_NETWORK_LIMITED bit (Jonas Schnelli)
7caba38 Add NODE_NETWORK_LIMITED flags and min block amount constants (Jonas Schnelli)
Pull request description:
Extracted from #10387.
Does implement BIP159, but only the signalling part. No connections are made to NODE_NETWORK_LIMITED in this PR.
The address relay and connection work (the more complicated part) can then be separated (probably in #10387).
Tree-SHA512: e3218eb4789a9320b0f42dc10f62d30c13c49bdef00443fbe653bee22933477adcfc1cf8f6a95269324560b5721203ed41f3c5e2dd8a98ec2791f6a9d8346b1a
c626dcb50 Make fUseCrypto atomic (MeshCollider)
731065b11 Consistent parameter names in txdb.h (MeshCollider)
35aeabec6 Make fReindex atomic to avoid race (MeshCollider)
58d91af59 Fix race for mapBlockIndex in AppInitMain (MeshCollider)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/11106
Also makes fReindex atomic as suggested in @TheBlueMatt comment below, and makes fUseCrypto atomic as suggested in 10916
d291e7635b just renames the parameters in the txdb header file to make them consistent with those used in the cpp file, noticed it when looking for uses of fReindex
Tree-SHA512: b378aa7289fd505b76565cd4d48dcdc04ac5540283ea1c80442170b0f13cb6df771b1a94dd54b7fec3478a7b4668c224ec9d795f16937782724c5d020edd3a42
bf64c3cb3 Ignore transactions added to mempool during a reorg for fee estimation purposes. (Alex Morcos)
04f78ab5b Do not reject based on mempool min fee when bypass_limits is set. (Alex Morcos)
fd849e1b0 Change AcceptToMemoryPool function signature (Alex Morcos)
Pull request description:
First commit just removes default arguments from `AcceptToMemoryPool` and consolidates two arguments, it does not change behavior.
Second commit finally fixes the fact that we're not meant to reject based on mempool min fee when adding a transaction from a disconnected block during a reorg as mentioned [here](https://github.com/bitcoin/bitcoin/pull/9602#issue-202197849)
Third commit makes fee estimation ignore transactions added from a disconnected block during a reorg. I think this was another source of fee estimates returning estimates below 1000 sat/kB as in #11303.
Tree-SHA512: 30925ca8b341915bb214f1d2590b36b7931f2e125b7660150e38ae70338f00db5aa7f1608546dddb181446924177eb7cf62ea8bd2583068acc074d6c3f86bc0c
3a131b724 Rename out to m_tx_out in CScriptCheck (Johnson Lau)
e91211878 [Refactor] Combine scriptPubKey and amount as CTxOut in CScriptCheck (Johnson Lau)
Pull request description:
This simplifies CScriptCheck by combining scriptPubKey and amount
Tree-SHA512: 6422363cf5394c6cfefb30c1709db6def63230b809cc7697887e4a2e8c684149208edf91dd139e031b9fe732776b2db59305f77c3cba6f333b11cceb39ef0cc2
- Move comment about transaction/block weight calculation so it applies not only to the GetBlockWeight function but also to GetTransactionWeight
- Fix comment in validation.cpp referencing future deployment of BIP113. It has already been deployed.
- The doc comment for BLOCK_DOWNLOAD_WINDOW wasn't updated since pruning was introduced, so it still refers to pruning as something that might happen in the future. A larger BLOCK_DOWNLOAD_WINDOW window would now, indeed, make pruning harder.
Combine fLimitFree and fOverrideMempoolLimit into a single boolean:
bypass_limits. This is used to indicate that mempool limiting based on feerate
should be bypassed. It is used when readding transactions from a reorg and then
the mempool is trimmed to size after all transactions are added and they can be
evaluated in the context of their descendants. No changes to behavior.
* This removes block-size-limiting code in favor of GBT clients
doing the limiting themselves (if at all).
* -blockmaxsize is deprecated and only used to calculate an implied
blockmaxweight, addressing confusion from multiple users.
* getmininginfo's currentblocksize return value was returning
garbage values, and has been removed, also removing a
GetSerializeSize call in some block generation inner loops and
potentially addressing some performance edge cases.
1aa97ee08 Add savemempool RPC (Lawrence Nahum)
467cbbcbf Add return value to DumpMempool (Lawrence Nahum)
Pull request description:
Adds a simple parameterless rpc command to dump the mempool.
Rationale:
Sometimes there can be a crash for whatever reason (bug, power loss, etc) causing the mempool.dat file to not be saved.
This change allows to script/cron the rpc call to have more regular saves to the file as well as cli/ad-hoc.
This should solve issue https://github.com/bitcoin/bitcoin/issues/11086
Tree-SHA512: e856ae9777425a4521279c9b58e69285d8e374790bebefd3284cf91931eac0e456f86224f427a087a01bf70440bf6e439fa02c8a34940eb1046ae473e98b6aaa
