00b8e26bd6 test: fix inconsistency in fundrawtransaction weight limits test (furszy)
Pull request description:
Fix https://github.com/bitcoin/bitcoin/pull/30309#discussion_r1657628378 inconsistency.
Currently, the test is passing due to a mistake in the test inputs
selection process. We are selecting the parent transaction change
output as one of the inputs of the transaction to fund, which
helps to surpass the target amount when it shouldn't due to the
fee reduction.
The failure arises when the test behaves as intended by its coder;
that is, when it does not select the change output. In this case,
the pre-selected inputs aren't enough to cover the target amount.
Fix this by excluding the parent transaction's change output from
the inputs selection and including an extra input to cover the tx
fee.
The CI failure can be replicated with the following patch in master:
```diff
diff --git a/test/functional/wallet_fundrawtransaction.py b/test/functional/wallet_fundrawtransaction.py
--- a/test/functional/wallet_fundrawtransaction.py(revision 9b480f7a25)
+++ b/test/functional/wallet_fundrawtransaction.py(date 1720652934739)
@@ -1322,7 +1322,7 @@
outputs = []
for _ in range(1472):
outputs.append({wallet.getnewaddress(address_type="legacy"): 0.1})
- txid = self.nodes[0].send(outputs=outputs)["txid"]
+ txid = self.nodes[0].send(outputs=outputs, change_position=0)["txid"]
self.generate(self.nodes[0], 1)
# 272 WU per input (273 when high-s); picking 1471 inputs will exceed the max standard tx weight.
@@ -1330,7 +1330,7 @@
# 1) Try to fund transaction only using the preset inputs
input_weights = []
- for i in range(1471):
+ for i in range(1, 1472): # skip first output as it is the parent tx change output
input_weights.append({"txid": txid, "vout": i, "weight": 273})
assert_raises_rpc_error(-4, "Transaction too large", wallet.fundrawtransaction, hexstring=rawtx, input_weights=input_weights)
```
ACKs for top commit:
achow101:
ACK 00b8e26bd6
ismaelsadeeq:
Code review and Tested ACK 00b8e26bd6
Tree-SHA512: 5ef792961b7fad4999fc30aa03366432103ddf672ca5cbb366c9eab4c2e46d5ae1ab0c073dfc4fbb2b4e63203653bc0e54463c731c5f8655140207ba5f8e542e
If the snapshot is not an ancestor of the most-work header (m_best_header),
syncing from that alternative chain should be prioritised.
Therefore don't accept loading a snapshot in this situation.
If that other chain turns out to be invalid, m_best_header
would be reset and loading the snapshot should be possible again.
Because of the work required to generate a conflicting headers chain,
this should only be possible under extreme circumstances, such as major forks.
8ce3739edb test: verify wallet is still active post-migration failure (furszy)
771bc60f13 wallet: Use LegacyDataSPKM when loading (Ava Chow)
61d872f1b3 wallet: Move MigrateToDescriptor and DeleteRecords to LegacyDataSPKM (Ava Chow)
b231f4d556 wallet: Move LegacyScriptPubKeyMan::IsMine to LegacyDataSPKM (Ava Chow)
7461d0c006 wallet: Move LegacySPKM data storage and handling to LegacyDataSPKM (Ava Chow)
517e204bac Change MigrateLegacyToDescriptor to reopen wallet as BERKELEY_RO (Ava Chow)
Pull request description:
#26606 introduced `BerkeleyRODatabase` which is an independent parser for BDB files. This PR uses this in legacy wallet migration so that migration will continue to work once the legacy wallet and BDB are removed. `LegacyDataSPKM` is introduced to have the minimum data and functions necessary for a legacy wallet to be loaded for migration.
ACKs for top commit:
cbergqvist:
ACK 8ce3739edb
theStack:
Code-review ACK 8ce3739edb
furszy:
Code review ACK 8ce3739edb
Tree-SHA512: dccea12d6c597de15e3e42f97ab483cfd069e103611200279a177e021e8e9c4e74387c4f45d2e58b3a1e7e2bdb32a1d2d2060b1f8086c03eeaa0c68579d9d54e
Currently, the test is passing due to a mistake in the test inputs
selection process. We are selecting the parent transaction change
output as one of the inputs of the transaction to fund, which
helps to surpass the target amount when it shouldn't due to the
fee reduction.
The failure arises when the test behaves as intended by its coder;
that is, when it does not select the change output. In this case,
the pre-selected inputs aren't enough to cover the target amount.
Fix this by excluding the parent transaction's change output from
the inputs selection and including an extra input to cover the tx
fee.
8789dc8f31 doc: Add note to getblockfrompeer on missing undo data (Fabian Jahr)
4a1975008b rpc: Make pruneheight also reflect undo data presence (Fabian Jahr)
96b4facc91 refactor, blockstorage: Generalize GetFirstStoredBlock (Fabian Jahr)
Pull request description:
The function `GetFirstStoredBlock()` helps us find the first block for which we have data. So far this function only looked for a block with `BLOCK_HAVE_DATA`. However, this doesn't mean that we also have the undo data of that block, and undo data might be required for what a user would like to do with those blocks. One example of how this might happen is if some blocks were fetched using the `getblockfrompeer` RPC. Blocks fetched from a peer will have data but no undo data.
The first commit here allows `GetFirstStoredBlock()` to check for undo data as well by passing a parameter. This alone is useful for #29553 and I would use it there.
In the second commit I am applying the undo check to the RPCs that report `pruneheight` to the user. I find this much more intuitive because I think the user expects to be able to do all operations on blocks up until the `pruneheight` but that is not the case if undo data is missing. I personally ran into this once before and now again when testing for assumeutxo when I had used `getblockfrompeer`. The following commit adds test coverage for this change of behavior.
The last commit adds a note in the docs of `getblockfrompeer` that undo data will not be available.
ACKs for top commit:
achow101:
ACK 8789dc8f31
furszy:
Code review ACK 8789dc8f31.
stickies-v:
ACK 8789dc8f31
Tree-SHA512: 90ae8bdd07a496ade579aa25240609c61c9ed173ad38d30533f6c631fe674e5a41727478ade69ca4b71a571ad94c9da4b33ebba6b5d8821109313c2de3bdfb3d
5b7f70ba26 test: loadtxoutset in divergent chain with less work (Alfonso Roman Zubeldia)
d35efe1efc p2p: Start downloading historical blocks from common ancestor (Martin Zumsande)
Pull request description:
This PR adds a test to cover the scenario of loading an assumeutxo snapshot when the current chain tip is not an ancestor of the snapshot block but has less work.
During the review process, a bug was discovered where blocks between the last common ancestor and the background tip were not being requested if the background tip was not an ancestor of the snapshot block. mzumsande suggested a fix (65343ec49a6b73c4197dfc38e1c2f433b0a3838a) to start downloading historical blocks from the last common ancestor to address this issue. This fix has been incorporated into the PR with a slight modification.
Related to https://github.com/bitcoin/bitcoin/issues/28648
ACKs for top commit:
fjahr:
tACK 5b7f70ba26
achow101:
ACK 5b7f70ba26
mzumsande:
Code Review ACK 5b7f70ba26
Tree-SHA512: f8957349686a6a1292165ea9e0fd8c912d21466072632a10f8ef9d852a5f430bc6b2a531e6884a4dbf2e3adb28b3d512b25919e78f5804a67320ef54c3b1aaf6
d93b794709 tests: improve wallet multisig descriptor test and docs (Michael Dietz)
Pull request description:
It is best to store all key origin information
(master key fingerprint and all derivation steps)
in the multisig descriptor. Being explicit with
this information should be beneficial if this approach is used with other wallets/signers (whether hardware or software). There is no harm including all of this with xpubs (if anything it simplifies the test code) and makes this example/docs more complete and safer incase it is referenced by others.
ACKs for top commit:
S3RK:
Code Review ACK d93b794709
achow101:
ACK d93b794709
Tree-SHA512: 0e5c4d13f060489405e6cf50c8a09911f5a0cee71023649235afd80a5e3aae38d52c6e12ad4660205b9357b09f45596941391bdcf6fceccbe07c4e5a1592a482
c9dacd958d test: Check that non empty version packet is ignored and no disconnection happens (stratospher)
997cc00b95 test: Check that disconnection happens when AAD isn't filled (stratospher)
b5e6238fdb test: Check that disconnection happens when garbage sent/received are different (stratospher)
ad1482d5a2 test: Check that disconnection happens when wrong garbage terminator is sent (stratospher)
e351576862 test: Check that disconnection happens when >4095 garbage bytes is sent (stratospher)
e075fd131d test: Introduce test types and modify v2 handshake function accordingly (stratospher)
7d07daa623 log: Add V2 handshake timeout (stratospher)
d4a1da8543 test: Make global TRANSPORT_VERSION variable an instance variable (stratospher)
c642b08c4e test: Log when the garbage is actually sent to transport layer (stratospher)
86cca2cba2 test: Support disconnect waiting for add_p2p_connection (stratospher)
bf9669af9c test: Rename early key response test and move random_bitflip to util (stratospher)
Pull request description:
Add tests for the following v2 handshake scenarios:
1. Disconnection happens when > `MAX_GARBAGE_LEN` bytes garbage is sent
2. Disconnection happens when incorrect garbage terminator is sent
3. Disconnection happens when garbage bytes are tampered with
4. Disconnection happens when AAD of first encrypted packet after the garbage terminator is not filled
5. bitcoind ignores non-empty version packet and no disconnection happens
All these tests require a modified v2 P2P class (different from `EncryptedP2PState` used in `v2_p2p.py`) to implement our custom handshake behaviour based on different scenarios and have been kept in a single test file (`test/functional/p2p_v2_misbehaving.py`). Shifted the test in `test/functional/p2p_v2_earlykeyresponse.py` which is of the same pattern to this file too.
ACKs for top commit:
achow101:
ACK c9dacd958d
mzumsande:
ACK c9dacd958d
theStack:
Code-review ACK c9dacd958d
Tree-SHA512: 90df81f0c7f4ecf0a47762d290a618ded92cde9f83d3ef3cc70e1b005ecb16125ec39a9d80ce95f99e695d29abd63443240cb5490aa57c5bc8fa2e52149a0672
de71d4dece fuzz: improve utxo_snapshot target (Martin Zumsande)
Pull request description:
Add the possibility of giving more guidance to the creation of the metadata and/or coins, so that the fuzzer gets the chance
to reach more error conditions in ActivateSnapshot and sometimes successfully creates a valid snapshot.
This also changes the asserts for the success case that were outdated (after #29370) and only didn't result in a crash because the fuzzer wasn't able to reach this code before.
ACKs for top commit:
maflcko:
re-ACK de71d4dece🎆
fjahr:
utACK de71d4dece
TheCharlatan:
ACK de71d4dece
Tree-SHA512: 346974d594164544d8cd3df7d8362c905fd93116215e9f5df308dfdac55bab04d727bfd7fd001cf11318682d11ee329b4b4a43308124c04d64b67840ab8a58a0
9e13ccc50e psbt: Check non witness utxo outpoint early (Ava Chow)
Pull request description:
A common issue that our fuzzers keep finding is that outpoints don't exist in the non witness utxos. Instead of trying to track this down and checking in various individual places, do the check early during deserialization. This also unifies the error message returned for this class of problems.
ACKs for top commit:
maflcko:
lgtm ACK 9e13ccc50e
S3RK:
tACK 9e13ccc50e
dergoegge:
utACK 9e13ccc50e
Tree-SHA512: 81b8055b146c6358052226578ddfec0ae5bd877968c7f4f62dc3d6a684545ea568f37c7f1bd619918441af9e453ba8b26531a2280d218da37fa15480f1b45d0e
Add the possibility of giving more guidance to the creation of the
metadata and/or coins, so that the fuzzer gets the chance
to reach more error conditions in ActivateSnapshot and sometimes
successfully creates a valid snapshot.
This also changes the asserts for the success case that were outdated,
and only didn't result in a crash because the fuzzer wasn't able
to reach this code before.
ce8094246e random: replace construct/assign with explicit Reseed() (Pieter Wuille)
2ae392d561 random: use LogError for init failure (Pieter Wuille)
97e16f5704 tests: make fuzz tests (mostly) deterministic with fixed seed (Pieter Wuille)
2c91330dd6 random: cleanup order, comments, static (Pieter Wuille)
8e31cf9c9b net, net_processing: use existing RNG objects more (Pieter Wuille)
d5fcbe966b random: improve precision of MakeExponentiallyDistributed (Pieter Wuille)
cfb0dfe2cf random: convert GetExponentialRand into rand_exp_duration (Pieter Wuille)
4eaa239dc3 random: convert GetRand{Micros,Millis} into randrange (Pieter Wuille)
82de1b80d9 net: use GetRandMicros for cache expiration (Pieter Wuille)
ddc184d999 random: get rid of GetRand by inlining (Pieter Wuille)
e2d1f84858 random: make GetRand() support entire range (incl. max) (Pieter Wuille)
810cdf6b4e tests: overhaul deterministic test randomness (Pieter Wuille)
6cfdc5b104 random: convert XoRoShiRo128PlusPlus into full RNG (Pieter Wuille)
8cc2f45065 random: move XoRoShiRo128PlusPlus into random module (Pieter Wuille)
8f5ac0d0b6 xoroshiro128plusplus: drop comment about nonexisting copy() (Pieter Wuille)
8924f5120f random: modernize XoRoShiRo128PlusPlus a bit (Pieter Wuille)
ddb7d26cfd random: add RandomMixin::randbits with compile-known bits (Pieter Wuille)
21ce9d8658 random: Improve RandomMixin::randbits (Pieter Wuille)
9b14d3d2da random: refactor: move rand* utilities to RandomMixin (Pieter Wuille)
40dd86fc3b random: use BasicByte concept in randbytes (Pieter Wuille)
27cefc7fd6 random: add a few noexcepts to FastRandomContext (Pieter Wuille)
b3b382dde2 random: move rand256() and randbytes() to .h file (Pieter Wuille)
493a2e024e random: write rand256() in function of fillrand() (Pieter Wuille)
Pull request description:
This PR contains a number of vaguely-related improvements to the random module.
The specific changes and more detailed rationale is in the commit messages, but the highlights are:
* `XoRoShiRo128PlusPlus` (previously a test-only RNG) moves to random.h and becomes `InsecureRandomContext`, which is even faster than `FastRandomContext` but non-cryptographic. It also gets all helper randomness functions (`randrange`, `fillrand`, ...), making it a lot more succinct to use.
* During tests, **all** randomness is made deterministic (except for `GetStrongRandBytes`) but non-repeating (like `GetRand()` used to be when `g_mock_deterministic_tests` was used), either fixed, or from a random seed (overridden by env var).
* Several infrequently used top-level functions (`GetRandMillis`, `GetRandMicros`, `GetExponentialRand`) are converted into member functions of `FastRandomContext` (and `InsecureRandomContext`).
* `GetRand<T>()` (without argument) can now return the maximum value of the type (previously e.g. `GetRand<uint32_t>()` would never return 0xffffffff).
ACKs for top commit:
achow101:
ACK ce8094246e
maflcko:
re-ACK ce8094246e🐈
hodlinator:
ACK ce8094246e
dergoegge:
utACK ce8094246e
Tree-SHA512: 79bc0cbafaf27e95012c1ce2947a8ca6f9a3c78af5f1f16e69354b6fc9b987a28858adf4cd356dc5baf21163e9af8dcc24e70f8d7173be870e8a3ddcdd47c02c
Updating to MLC v0.18.0 includes a new feature which will ignore all
files ignored by git: `--gitignore`.
This helps avoid false-positives flagged by this linter in non-project
files, such as a developer might expect to have in their directory (e.g.
guix-builds, python venvs, etc.)
This test checks that we can successfully process PSBTs and opt out of
finalization.
Previously trying to call `walletprocesspsbt` would attempt to
auto-finalize (as a convenience), and would not permit opt-out of
finalization, instead aborting via `CHECK_NONFATAL`.
2342b46c45 test: Add coverage for getchaintxstats in assumeutxo context (Fabian Jahr)
faf2a6750b rpc: Reorder getchaintxstats output (MarcoFalke)
fa2dada0c9 rpc: Avoid getchaintxstats invalid results (MarcoFalke)
Pull request description:
The `getchaintxstats` RPC reply during AU background download may return non-zero, but invalid, values for `window_tx_count` and `txrate`.
For example, `txcount` may be zero for a to-be-downloaded block, but may be non-zero for an ancestor block which is already downloaded. Thus, the values returned may be negative (and cause intermediate integer sanitizer violations).
Also, `txcount` may be accurate for the snapshot base block, or a descendant of it. However it may be zero for an ancestor block that still needs to be downloaded. Thus, the values returned may be positive, but wrong.
Fix all issues by skipping the returned value if either `txcount` is unset (equal to zero).
Also, skip `txcount` in the returned value, if it is unset (equal to zero).
Fixes https://github.com/bitcoin/bitcoin/issues/29328
ACKs for top commit:
fjahr:
re-ACK 2342b46c45
achow101:
ACK 2342b46c45
mzumsande:
ACK 2342b46c45
Tree-SHA512: 931cecc40ee5dc0f96be728db7eb297155f8343076cd29c8b8c050c99fd1d568b80f54c9459a34ca7a9489c2474c729796d00eeb1934d6a9f7b4d6a53e3ec430
926b8e39dc [doc] add release note for TRUC (glozow)
19a9b90617 use version=3 instead of v3 in debug strings (glozow)
881fac8e60 scripted-diff: change names from V3 to TRUC (glozow)
a573dd2617 [doc] replace mentions of v3 with TRUC (glozow)
089b5757df rename mempool_accept_v3.py to mempool_truc.py (glozow)
f543852a89 rename policy/v3_policy.* to policy/truc_policy.* (glozow)
Pull request description:
Adds a release note for TRUC policy which will be live in v28.0.
For clarity, replaces mentions of "v3" with "TRUC" in most places. Suggested in
- https://github.com/bitcoin/bitcoin/pull/29496#discussion_r1629749583
- https://github.com/bitcoin/bitcoin/pull/29496#discussion_r1624500904
I changed error strings from "v3-violation" to "TRUC-violation" but left v3 in the debug strings because I think it might be clearer for somebody who is debugging. Similarly, I left some variables unchanged because I think they're more descriptive this way, e.g. `tx_v3_from_v2_and_v3`. I'm happy to debate places that should or shouldn't be documented differently in this PR, whatever is clearest to everyone.
ACKs for top commit:
instagibbs:
reACK 926b8e39dc
achow101:
ACK 926b8e39dc
ismaelsadeeq:
Code review ACK 926b8e39dc
Tree-SHA512: 16c88add0a29dc6d1236c4d45f34a17b850f6727b231953cbd52eb9f7268d1d802563eadfc8b7928c94ed3d7a615275dd103e57e81439ebf3ba2b12efa1e42af
2f9bde69f4 test: Remove unnecessary restart in assumeutxo test (Fabian Jahr)
19ce3d407e assumeutxo: Check snapshot base block is not marked invalid (Fabian Jahr)
80315c0118 refactor: Move early loadtxoutset checks into ActiveSnapshot (Fabian Jahr)
Pull request description:
This was discovered in a discussion in #29996
If the base block of the snapshot is marked invalid or part of an invalid chain, we currently still load the snapshot and get stuck in a weird state where we have the snapshot chainstate but it will never connect to our valid chain.
While this scenario is highly unlikely to occur on mainnet, it still seems good to prevent this inconsistent state.
The behavior change described above is in the second commit.
The first commit refactors the early checks in the `loadtxoutset` RPC by moving them into `ActivateSnapshot()` in order to have the chance to cover them by unit tests in the future and have a more consistent interface. Previously checks were spread out between `rpc/blockchain.cpp` and `validation.cpp`. In order to be able to return the error message to users of the RPC, the return type of `ActivateSnapshot()` is changed from `bool` to `util::Result`.
The third commit removes an unnecessary restart introduced in #29428.
ACKs for top commit:
mzumsande:
re-ACK 2f9bde6
alfonsoromanz:
Re-ACK 2f9bde69f4. The RPC code looks much cleaner after the refactor. Also, it seems very useful to get the error message in the RPC response rather than having to rely on the logs in some scenarios if you are an RPC user.
achow101:
ACK 2f9bde69f4
Tree-SHA512: 5328dd88c3c7be3f1be97c9eef52ac3666c27188c30a798b3e949f3ffcb83be075127c107e4046f7f39f961a79911ea3d61b61f3c11e451b3e4c541c264eeed4
8ec24bdad8 test: Added coverage to Block not found error using gettxoutsetinfo (kevkevinpal)
Pull request description:
#### Description
There were no tests that checked for the `Block not found` error called in `ParseHashOrHeight` when using `gettxoutsetinfo`, this change adds coverage to it.
You can see there are no tests that do the following by doing the below
`grep -nri "Block not found.*gettxoutsetinfo" ./test/functional/`
which leads to no results
ACKs for top commit:
achow101:
ACK 8ec24bdad8
tdb3:
ACK 8ec24bdad8
kristapsk:
ACK 8ec24bdad8
brunoerg:
crACK 8ec24bdad8
alfonsoromanz:
Re ACK 8ec24bdad8
Tree-SHA512: 2c61c681e7304c679cc3d7dd13af1b795780e85716c25c7423d68104e253d01271e048e21bc21be35dbc7ec1a4fde94e439542f3cfd669fe5a16478c5fa982ab
e38eadb2c2 test: change comments to `self.log.info` for `test_addnode_getaddednodeinfo` (brunoerg)
c838e3b610 test: add coverage for `node` field of `getaddednodeinfo` RPC (brunoerg)
Pull request description:
We currently do not test a successful call to `getaddednodeinfo` filtering by `node`, we only test it with an unknown address and checks whether it fails. This PR adds coverage to it.
ACKs for top commit:
kevkevinpal:
ACK [e38eadb](e38eadb2c2)
achow101:
ACK e38eadb2c2
tdb3:
re ACK e38eadb2c2
BrandonOdiwuor:
Code Review ACK e38eadb2c2
rkrux:
tACK [e38eadb](e38eadb2c2)
Tree-SHA512: e9f768b7aa86e58b0b0ced089ead57040ff9a5204493da1ab99c8bc897b6dcdce7c856855f74c52010fceef19af1e12a39eee9f8f2e7294b42476b6f980fe754
In the Tor case, this prevents us from telling the Tor daemon to send
our incoming connections from the Tor network to an address where we
do not listen (we tried to listen but failed probably because another
application is already listening).
In the other cases (IPv4/IPv6 binds) this also prevents unpleasant
surprises caused by continuing operations even on bind failure. For
example, another application may be listening on portX, bitcoind tries
to bind on portX and portY, only succeeds with portY and continues
operation leaving the user thinking that his bitcoind is listening on
portX whereas another application is listening (the error message in
the log could easily be missed).
Avoid having the functional testing framework start multiple `bitcoind`s
that try to listen on the same `127.0.0.1:18445` (Tor listen for
regtest) if `bind_to_localhost_only` is set to `False`.
Also fix a typo in `test-shell.md` related to `bind_to_localhost_only`.
Fixes https://github.com/bitcoin/bitcoin/issues/22727
If only `-bind=addr:port` is given (without `-bind=...=onion`) then we
would bind to `addr:port` _and_ to `127.0.0.1:8334` in addition which
may be unexpected, assuming the semantic of `-bind=addr:port` is
"bind _only_ to `addr:port`".
Change the above to not do the additional bind: if only
`-bind=addr:port` is given (without `-bind=...=onion`) then bind to
`addr:port` (only). If we are creating a Tor hidden service then use
`addr:port` as target (same behavior as before
https://github.com/bitcoin/bitcoin/pull/19991).
This allows disabling binding on the onion port.
Fixes https://github.com/bitcoin/bitcoin/issues/22726
Keep mentions of v3 in debug strings to help people who might not know
that TRUC is applied when version=3.
Also keep variable names in tests, as it is less verbose to keep v3 and v2.
The migration process reloads the wallet after all failures.
This commit tests the behavior by trying to obtain a new address
after a decryption failure during migration.
Convert XoRoShiRo128PlusPlus into a full RandomMixin-based RNG class,
providing all utility functionality that FastRandomContext has. In doing so,
it is renamed to InsecureRandomContext, highlighting its non-cryptographic
nature.
To do this, a fillrand fallback is added to RandomMixin (where it is used by
InsecureRandomContext), but FastRandomContext still uses its own fillrand.
In many cases, it is known at compile time how many bits are requested from
randbits. Provide a variant of randbits that accepts this number as a template,
to make sure the compiler can make use of this knowledge. This is used immediately
in rand32() and randbool(), and a few further call sites.
The previous randbits code would, when requesting more randomness than available
in its random bits buffer, discard the remaining entropy and generate new.
Benchmarks show that it's usually better to first consume the existing randomness
and only then generate new ones. This adds some complexity to randbits, but it
doesn't weigh up against the reduced need to generate more randomness.
The "connect to ourself" detection logic has been first introduced
by Satoshi in October 2009, together with a couple of other changes
and a version bump to "v0.1.6 BETA" (see commit
cc0b4c3b62).
73f0a6cbd0 doc: detail -rpccookieperms option (willcl-ark)
d2afa2690c test: add rpccookieperms test (willcl-ark)
f467aede78 init: add option for rpccookie permissions (willcl-ark)
7df03f1a92 util: add perm string helper functions (willcl-ark)
Pull request description:
This PR picks up #26088 by aureleoules which adds a bitcoind launch option `-rpccookieperms` to set the file permissions of the cookie generated by bitcoin core.
Example usage to make the generated cookie group-readable: `./src/bitcoind -rpccookieperms=group`.
Accepted values for `-rpccookieperms` are `[owner|group|all]`. We let `fs::perms` handle platform-specific permissions changes.
ACKs for top commit:
achow101:
ACK 73f0a6cbd0
ryanofsky:
Code review ACK 73f0a6cbd0. Main change since last review is no longer throwing a skip exception in the rpc test on windows, so other checks can run after it, and overall test result is passing, not skipped. Also were clarifying renames and documentation improvements.
tdb3:
cr ACK 73f0a6cbd0
Tree-SHA512: e800d59a44aca10e1c58ca69bf3fdde9f6ccf5eab4b7b962645af6d6bc0cfa3a357701e409c8c60d8d7744fcd33a91e77ada11790aa88cd7811ef60fab86ab11
This allows a transaction's weight to be bound under a certain
weight if possible and desired. This can be beneficial for future
RBF attempts, or whenever a more restricted spend topology is
desired.
Co-authored-by: Greg Sanders <gsanders87@gmail.com>
72b226882f wallet: notify when preset + automatic inputs exceed max weight (furszy)
Pull request description:
Small change. Found it while finishing my review on #29523. This does not interfere with it.
Basically, we are erroring out early when the automatic coin selection process exceeds the maximum weight, but we are not doing so when the user-preselected inputs combined with the wallet-selected inputs exceed the maximum weight.
This change avoids signing all inputs before erroring out and introduces test coverage for `fundrawtransaction`.
ACKs for top commit:
achow101:
ACK 72b226882f
tdb3:
re ACK for 72b226882f
rkrux:
tACK [72b2268](72b226882f)
ismaelsadeeq:
utACK 72b226882f
Tree-SHA512: d77be19231023383a9c79a5d66b642dcbc6ebfc31a363e0b9f063c44898720a7859ec211cdbc0914ac7a3bfdf15e52fb8fc20d97f171431f70492c0f159dbc36
a9716c53f0 rpc: call IsInitialBlockDownload via miner interface (Sjors Provoost)
dda0b0834f rpc: minize getTipHash() calls in gbt (Sjors Provoost)
7b4d3249ce rpc: call processNewBlock via miner interface (Sjors Provoost)
9e228351e7 rpc: getTransactionsUpdated via miner interface (Sjors Provoost)
64ebb0f971 Always pass options to BlockAssembler constructor (Sjors Provoost)
4bf2e361da rpc: call CreateNewBlock via miner interface (Sjors Provoost)
404b01c436 rpc: getblocktemplate getTipHash() via Miner interface (Sjors Provoost)
d8a3496b5a rpc: call TestBlockValidity via miner interface (Sjors Provoost)
8ecb681678 Introduce Mining interface (Sjors Provoost)
Pull request description:
Introduce a `Mining` interface for the `getblocktemplate`, `generateblock` and other mining RPCs to use now, and for Stratum v2 to use later.
Suggested here: https://github.com/bitcoin/bitcoin/pull/29346#issuecomment-2108528652
The selection of methods added to the interface is mostly based on what the Template Provider in #29432 uses. It could be expanded further so that `rpc/mining.cpp` no longer needs `EnsureMemPool` and `EnsureChainman`.
This PR should be a pure refactor.
ACKs for top commit:
tdb3:
re ACK a9716c53f0
itornaza:
Code review and std-tests ACK a9716c53f0
ryanofsky:
Code review ACK a9716c53f0 with one minor suggestion in case you update. Only changes since last review were other small changes to the interface.
Tree-SHA512: cf97f87d6e9ed89da3835a0730da3b24a7b14c8605ea221149103a5915e79598cf082a95f2bc88e33f1c450e3d4aad88aed1163a29195acca88bcace055af724
This test type is represented using SEND_NO_AAD. If AAD of the first encrypted packet
sent after the garbage terminator (optional decoy packet/version packet) hasn't been
filled, disconnection happens.
This test type is represented using WRONG_GARBAGE.
Here, garbage bytes sent to TestNode are assumed to be tampered with and
do not correspond to the garbage bytes which P2PInterface calculated and
uses.
This test type is represented using WRONG_GARBAGE_TERMINATOR.
since the wrong garbage terminator is sent to TestNode, TestNode
will interpret all of the gabage bytes, wrong garbage terminator,
decoy messages and version packet it receives as garbage bytes.
If the length of all these is more than 4095 + 16, it will result
in a missing garbage terminator error. otherwise, it will result
in a V2 handshake timeout error.
Send only MAX_GARBAGE_LEN//2 bytes of garbage data to TestNode
so that the total length received by the TestNode is at max
= (MAX_GARBAGE_LEN//2) + 16 + 10*120 + 20 = 3283 bytes
(which is less than 4095 + 16 bytes) and we get a consistent
V2 handshake timeout error message.
If we do not limit the garbage length sent, we will intermittently
get both missing garbage terminator error and V2 handshake
timeout error based on the garbage length and decoy packets length
which are chosen at random.
6eecba475e net_processing: make MaybePunishNodeFor{Block,Tx} return void (Pieter Wuille)
ae60d485da net_processing: remove Misbehavior score and increments (Pieter Wuille)
6457c31197 net_processing: make all Misbehaving increments = 100 (Pieter Wuille)
5120ab1478 net_processing: drop 8 headers threshold for incoming BIP130 (Pieter Wuille)
944c54290d net_processing: drop Misbehavior for unconnecting headers (Pieter Wuille)
9f66ac7cf1 net_processing: do not treat non-connecting headers as response (Pieter Wuille)
Pull request description:
So far, discouragement of peers triggers when their misbehavior score exceeds 100 points. Most types of misbehavior increment the score by 100, triggering immediate discouragement, but some types do not. This PR makes all increments equal to either 100 (meaning any misbehavior will immediately cause disconnection and discouragement) or 0 (making the behavior effectively unconditionally allowed), and then removes the logic for score accumulation.
This simplifies the code a bit, but also makes protocol expectations clearer: if a peer misbehaves, they get disconnected. There is no good reason why certain types of protocol violations should be permitted 4 times (howmuch=20) or 9 times (howmuch=10), while many others are never allowed. Furthermore, the distinction between these looks arbitrary.
The specific types of misbehavior that are changed to 100 are:
* Sending us a `block` which does not connect to our header tree (which necessarily must have been unsollicited). [used to be score 10]
* Sending us a `headers` with a non-continuous headers sequence. [used to be score 20]
* Sending us more than 1000 addresses in a single `addr` or `addrv2` message [used to be score 20]
* Sending us more than 50000 invs in a single `inv` message [used to be score 20]
* Sending us more than 2000 headers in a single `headers` message [used to be score 20]
The specific types of misbehavior that are changed to 0 are:
* Sending us 10 (*) separate BIP130 headers announcements that do not connect to our block tree [used to be score 20]
* Sending us more than 8 headers in a single `headers` message (which thus does not get treated as a BIP130 announcement) that does not connect to our block tree. [used to be score 10]
I believe that none of these behaviors are unavoidable, except for the one marked (*) which can in theory happen still due to interaction between BIP130 and variations in system clocks (the max 2 hour in the future rule). This one has been removed entirely. In order to remove the impact of the bug it was designed to deal with, without relying on misbehavior, a separate improvement is included that makes `getheaders`-tracking more accurate.
In another unrelated improvement, this also gets rid of the 8 header limit heuristic to determine whether an incoming non-connecting `headers` is a potential BIP130 announcement, as this rule is no longer needed to prevent spurious Misbehavior. Instead, any non-connecting `headers` is now treated as a potential announcement.
ACKs for top commit:
sr-gi:
ACK [6eecba4](6eecba475e)
achow101:
ACK 6eecba475e
mzumsande:
Code Review ACK 6eecba475e
glozow:
light code review / concept ACK 6eecba475e
Tree-SHA512: e11e8a652c4ec048d8961086110a3594feefbb821e13f45c14ef81016377be0db44b5311751ef635d6e026def1960aff33f644e78ece11cfb54f2b7daa96f946
94ed4fbf8e Add release note for size 2 package rbf (Greg Sanders)
afd52d8e63 doc: update package RBF comment (Greg Sanders)
6e3c4394cf mempool: Improve logging of replaced transactions (Greg Sanders)
d3466e4cc5 CheckPackageMempoolAcceptResult: Check package rbf invariants (Greg Sanders)
316d7b63c9 Fuzz: pass mempool to CheckPackageMempoolAcceptResult (Greg Sanders)
4d15bcf448 [test] package rbf (glozow)
dc21f61c72 [policy] package rbf (Suhas Daftuar)
5da3967815 PackageV3Checks: Relax assumptions (Greg Sanders)
Pull request description:
Allows any 2 transaction package with no in-mempool ancestors to do package RBF when directly conflicting with other mempool clusters of size two or less.
Proposed validation steps:
1) If the transaction package is of size 1, legacy rbf rules apply.
2) Otherwise the transaction package consists of a (parent, child) pair with no other in-mempool ancestors (or descendants, obviously), so it is also going to create a cluster of size 2. If larger, fail.
3) The package rbf may not evict more than 100 transactions from the mempool(bip125 rule 5)
4) The package is a single chunk
5) Every directly conflicted mempool transaction is connected to at most 1 other in-mempool transaction (ie the cluster size of the conflict is at most 2).
6) Diagram check: We ensure that the replacement is strictly superior, improving the mempool
7) The total fee of the package, minus the total fee of what is being evicted, is at least the minrelayfee * size of the package (equivalent to bip125 rule 3 and 4)
Post-cluster mempool this will likely be expanded to general package rbf, but this is what we can safely support today.
ACKs for top commit:
achow101:
ACK 94ed4fbf8e
glozow:
reACK 94ed4fbf8e via range-diff
ismaelsadeeq:
re-ACK 94ed4fbf8e
theStack:
Code-review ACK 94ed4fbf8e
murchandamus:
utACK 94ed4fbf8e
Tree-SHA512: 9bd383e695964f362f147482bbf73b1e77c4d792bda2e91d7f30d74b3540a09146a5528baf86854a113005581e8c75f04737302517b7d5124296bd7a151e3992
881724d443 test: Added test coverage to listsinceblock rpc (kevkevinpal)
Pull request description:
This change is meant to add test coverage to this rpc error https://github.com/bitcoin/bitcoin/blob/master/src/wallet/rpc/transactions.cpp#L666C53-L666C79
This is done by renaming the first block in the blocks folder
---
Doing a quick grep for the error code in our functional tests leads to zero results
`grep -nri "Can't read block from disk" ./test/functional/`
ACKs for top commit:
achow101:
ACK 881724d443
tdb3:
re ACK for 881724d443
rkrux:
tACK [881724](881724d443)
Tree-SHA512: c5dff20cf014d0181f49d6b161f1364e1c6b79e8661047f77f07e21e59f4d1f2fd6f745538c8fc5bd6d4244650a840dd64d184634366f7c21fa67141a60af44a
5cf0a1f230 test: add `createmultisig` P2MS encoding test for all n (1..20) (Sebastian Falbesoner)
0570d2c204 test: add unit test for `keys_to_multisig_script` (Sebastian Falbesoner)
0c41fc3fa5 test: fix `keys_to_multisig_script` (P2MS) helper for n/k > 16 (Sebastian Falbesoner)
Pull request description:
While reviewing #28307, I noticed that the test framework's `key_to_multisig_script` helper (introduced in #23305) is broken for pubkey count (n) and threshold (k) values larger than 16. This is due to the implementation currently enforcing a direct single-byte data push (using `CScriptOp.encode_op_n`), which obviously fails for values 17+. Fix that by passing the numbers directly to the CScript list, where it's automatically converted to minimally-encoded pushes (see class method `CScript.__coerce_instance`, branch `isinstance(other, int)`).
The second commit adds a unit test to ensure that the encoding is correct.
ACKs for top commit:
achow101:
ACK 5cf0a1f230
tdb3:
ACK 5cf0a1f230
rkrux:
reACK [5cf0a1f](5cf0a1f230)
Tree-SHA512: 4168a165c3f483ec8e37a27dba1628a7ea0063545a2b7e74d9e20d753fddd7e33d37e1a190434fa6dca39adf9eef5d0211f7a0c1c7b44979f0a3bb350e267562
Prior to this commit, TestEncryptedP2PState would always
send initial_v2_handshake bytes in 2 parts (as required
by early key response test).
For generalising this test and having different v2 handshake
behaviour based on the test type, special behaviours like
sending initial_v2_handshake bytes in 2 parts are executed
only if test_type is set to EARLY_KEY_RESPONSE.
Adds argument --resultsfile to test_runner.py.
Writes comma-separated functional test name, status,
and duration to the file provided with the argument.
Also fixes minor typo in test_runner.py
f58beabe75 test: bumpfee with user specified fee_rate ignores walletIncrementalRelayFee (ismaelsadeeq)
436e88f433 bumpfee: ignore WALLET_INCREMENTAL_RELAY_FEE when user specifies fee rate (ismaelsadeeq)
Pull request description:
Fixes#26973
When using the `bumpfee` RPC and manually specifying `fee_rate`, there should be no requirement that the new fee must be at least the sum of the original fee and `incrementalFee` (maximum of `relayIncrementalFee` and `WALLET_INCREMENTAL_RELAY_FEE`).
This restriction should only apply when user did not specify `fee_rate`.
> because the GUI doesn't let the user specify the new fee rate yet (https://github.com/bitcoin-core/gui/issues/647), it would be very annoying to have to bump 20 times to increment by 20 sat/vbyte.
The restriction should instead be the new fee must be at least the sum of the original fee and `incrementalFee` (`relayIncrementalFee`)
ACKs for top commit:
achow101:
ACK f58beabe75
murchandamus:
ACK f58beabe75
Tree-SHA512: 193259f87173b7d5a8e68e0e29f2ca7e75c550e3cf0dee3d6d822b5b1e07c2e6dec0bfc8fb435855736ebced97a10dbdbfef72e8c5abde06fdefcba122f2e7f1
e2779ce98b test: cover more errors for `signrawtransactionwithkey` RPC (brunoerg)
Pull request description:
This PR adds test coverage for the following errors for the `signrawtransactionwithkey` RPC:
- Invalid private key
- TX decode failed
For reference: https://maflcko.github.io/b-c-cov/total.coverage/src/rpc/rawtransaction.cpp.gcov.html
ACKs for top commit:
maflcko:
ACK e2779ce98b
kevkevinpal:
ACK [e2779ce](e2779ce98b)
tdb3:
ACK e2779ce98b
BrandonOdiwuor:
Code Review ACK e2779ce98b
Tree-SHA512: 41c7e990684b60645cf4ccec8aad5ebbe61da221871eb3c1685b2bb1eebda58b29358502cb1525b7c7a2b612e2bebf449ed0bae14ab663b4641c528a9c013b5b
0fcbfdb7ad Support running individual lint checks (David Gumberg)
Pull request description:
This PR was split out from #29965:
Adds support for running individual tests in the rust lint suite by passing `--lint=LINT_TO_RUN` to the lint runner. This PR also adds a corresponding help message.
When running with `cargo run`, arguments after a double dash (`--`) are passed to the binary instead of the cargo command. For example, in order to run the linter check that tabs are not used as whitespace:
```console
cd test/lint/test_runner && cargo run -- --lint=tabs_whitespace
```
ACKs for top commit:
maflcko:
ACK 0fcbfdb7ad
achow101:
ACK 0fcbfdb7ad
marcofleon:
Tested ACK 0fcbfdb7ad. Ran `cargo run` with various of the individual tests and with bad input. Also ran it with no arguments. Everything works as expected and help message looks good.
Tree-SHA512: 48fe4aa9fbb2acef5f8e3c17382ae22e0e350ae6ad9aeeb1a3c0a9192de98809f98728e32b8db24a36906ace999e35626ebd6cb2ca05f74146d21e9b6fb14615
429ec1aaaa refactor: Rename CTransaction::nVersion to version (Ava Chow)
27e70f1f5b consensus: Store transaction nVersion as uint32_t (Ava Chow)
Pull request description:
Given that the use of a transaction's nVersion is always as an unsigned int, it doesn't make sense to store it as signed and then cast it to unsigned everywhere it is used and displayed.
Since a few alternative implementations have recently been revealed to have made an error with this signedness that would have resulted in consensus failure, I think it makes sense for us to just make this always unsigned to make it clear that the version is treated as unsigned. This would also help us avoid future potential issues with signedness of this value.
I believe that this is safe and does not actually change what transactions would or would not be considered both standard and consensus valid. Within consensus, the only use of the version in consensus is in BIP68 validation which was already casting it to uint32_t. Within policy, although it is used as a signed int for the transaction version number check, I do not think that this change would change standardness. Standard transactions are limited to the range [1, 2]. Negative numbers would have fallen under the < 1 condition, but by making it unsigned, they are still non-standard under the > 2 condition.
Unsigned and signed ints are serialized and unserialized the same way so there is no change in serialization.
ACKs for top commit:
maflcko:
ACK 429ec1aaaa 🐿
glozow:
ACK 429ec1aaaa
shaavan:
ACK 429ec1aaaa💯
Tree-SHA512: 0bcd92a245d7d16c3665d2d4e815a4ef28207ad4a1fb46c6f0203cdafeab1b82c4e95e4bdce7805d80a4f4a46074f6542abad708e970550d38a00d759e3dcef1
47f705b33f tests: add fuzz tests for BitSet (Pieter Wuille)
59a6df6bd5 util: add BitSet (Pieter Wuille)
Pull request description:
Extracted from #30126.
This introduces the `BitSet` data structure, inspired by `std::bitset`, but with a few features that cannot be implemented on top without efficiency loss:
* Finding the first set bit (`First`)
* Finding the last set bit (`Last`)
* Iterating over all set bits (`begin` and `end`).
And a few other operators/member functions that help readability for #30126:
* `operator-` for set subtraction
* `Overlaps()` for testing whether intersection is non-empty
* `IsSupersetOf()` for testing (non-strict) supersetness
* `IsSubsetOf()` for testing (non-strict) subsetness
* `Fill()` to construct a set with all numbers from 0 to n-1, inclusive
* `Singleton()` to construct a set with one specific element.
Everything is tested through a simulation-based fuzz test that compares the behavior with normal `std::bitset` equivalent operations.
ACKs for top commit:
instagibbs:
ACK 47f705b33f
achow101:
ACK 47f705b33f
cbergqvist:
re-ACK 47f705b33f
theStack:
Code-review ACK 47f705b33f
Tree-SHA512: e451bf4b801f193239ee434b6b614f5a2ac7bb49c70af5aba24c2ac0c54acbef4672556800e4ac799ae835632bdba716209c5ca8c37433a6883dab4eb7cd67c1
24bc46c83b cli: Add warning for duplicate port definition (tdb3)
e208fb5d3b cli: Sanitize ports in rpcconnect and rpcport (tdb3)
Pull request description:
Adds invalid port detection to bitcoin-cli for -rpcconnect and -rpcport.
In addition to detecting malformed/invalid ports (e.g. those outside of the 16-bit port range, not numbers, etc.), bitcoin-cli also now considers usage of port 0 to be invalid. bitcoin-cli previously considered port 0 to be valid and attempted to use it to reach bitcoind.
Functional tests were added for invalid port detection as well as port prioritization.
Additionally, a warning is provided when a port is specified in both -rpcconnect and -rpcport.
This PR is an alternate approach to PR #27820 (e.g. SplitHostPort is unmodified).
Considered an alternative to 127.0.0.1 being specified in functional tests, but at first glance, this might need an update to test_framework/util.py (e.g. rpc_url), which might be left to a future PR.
ACKs for top commit:
S3RK:
light code review ACK 24bc46c83b
achow101:
ACK 24bc46c83b
cbergqvist:
re ACK 24bc46c83b
Tree-SHA512: c83ab6a30a08dd1ac8b368a7dcc2b4f23170f0b61dd67ffcad7bcda05096d333bcb9821fba11018151f55b2929c0a333bfec15b8bb863d83f41fc1974c6efca5
Not every pseudorandom hash result is a valid x-only public key,
so the pubkey tweaking in the course of creating the output public
key would fail about every second time.
Fix this by treating the hash result as private key and calculate
the x-only public key out of that, to be used then as internal key.
ab98e6fd03 test: add coverage for errors for `combinerawtransaction` RPC (brunoerg)
Pull request description:
This PR adds test coverage for the following errors for the `combinerawtransaction` RPC:
* Tx decode failed
* Missing transactions
* Input not found or already spent
For reference: https://maflcko.github.io/b-c-cov/total.coverage/src/rpc/rawtransaction.cpp.gcov.html
ACKs for top commit:
maflcko:
lgtm ACK ab98e6fd03
tdb3:
ACK ab98e6fd03
Tree-SHA512: 8a133c25dad2e1b236e0278a88796f60f763e3fd6fbbc080f926bb23f9dcc55599aa242d6e0c4ec15a179d9ded10a1f17ee5b6063719107ea84e6099f10416b2
0000276b31 test: Remove redundant verack check (MarcoFalke)
Pull request description:
Currently the sync in `connect_nodes` mentions the `version` and `verack` message types, but only checks the `verack`. Neither check is required, as the `pong` check implies both. In case of failure, the debug log will have to be consulted anyway, so the redundant check doesn't add value.
Also clarify in the comments that the goal is to check the flag `fSuccessfullyConnected` indirectly.
ACKs for top commit:
furszy:
utACK 0000276b31
brunoerg:
ACK 0000276b31
tdb3:
ACK 0000276b31
Tree-SHA512: f9ddcb1436d2f70da462a8dd470ecfc90a534dd6507c23877ef7626e7c02326c077001a42ad0171a87fba5c5275d1970d8c5e5d82c56c8412de944856fdfd6db
This commit fixes a dormant bug in MiniWallet that exists since
support for P2TR was initially added in #23371 (see commit
041abfebe4).
In the course of spending the output, the leaf version byte of the
control block in the witness stack doesn't set the parity bit, i.e.
we were so far just lucky that the used combinations of relevant
data (internal pubkey, leaf script / version) didn't result in a
tweaked pubkey with odd y-parity. If that was the case, we'd get the
following validation error:
`mandatory-script-verify-flag-failed (Witness program hash mismatch) (-26)`
Since MiniWallets can now optionally be tagged (#29939), resulting
in different internal pubkeys, the issue is more prevalent now.
Fix it by passing the parity bit, as specified in BIP341.
Rather than only returning the internal key from the P2TR anyone-can-spend
address creation routine, provide the whole TaprootInfo object, which in turn
contains a dictionary of TaprootLeafInfo object for named leaves.
This data is used in MiniWallet for the default ADDRESS_OP_TRUE mode, in order
to deduplicate the witness script and leaf version of the control block.
39d135e79f test: MiniWallet: respect fee_rate for target_weight, use in mempool_limit.py (Sebastian Falbesoner)
b2f0a9f8b0 test: add framework functional test for MiniWallet's tx padding (Sebastian Falbesoner)
c17550bc3a test: MiniWallet: fix tx padding (`target_weight`) for large sizes, improve accuracy (Sebastian Falbesoner)
Pull request description:
MiniWallet allows to create padded transactions that are equal or slightly above a certain `target_weight` (first introduced in PR #25379, commit 1d6b438ef0), which can be useful especially for mempool-related tests, e.g. for policy limit checks or scenarios to trigger mempool eviction. Currently the `target_weight` parameter doesn't play together with `fee_rate` though, as the fee calculation is incorrectly based on the tx vsize before the padding output is added, so the fee-rate is consequently far off. This means users are forced to pass an absolute fee, which can be quite inconvenient and leads to lots of duplicated "calculate absolute fee from fee-rate and vsize" code with the pattern `fee = (feerate / 1000) * (weight // 4)` on the call-sites.
This PR first improves the tx padding itself to be more accurate, adds a functional test for it, and fixes the `fee_rate` treatment for the `{create,send}_self_transfer` methods. (Next step would be to enable this also for the `_self_transfer_multi` methods, but those currently don't even offer a `fee_rate` parameter). Finally, the ability to pass both `target_weight` and `fee_rate` is used in the `mempool_limit.py` functional test. There might be more use-cases in other tests, that could be done in a follow-up.
ACKs for top commit:
rkrux:
tACK [39d135e](39d135e79f)
ismaelsadeeq:
Code Review ACK 39d135e79f🚀
glozow:
light review ACK 39d135e79f
Tree-SHA512: 6bf8e853a921576d463291d619cdfd6a7e74cf92f61933a563800ac0b3c023a06569b581243166906f56b3c5e8858fec2d8a6910d55899e904221f847eb0953d
f68cba29b3 blockman: Replace m_reindexing with m_blockfiles_indexed (Ryan Ofsky)
1b1c6dcca0 test: Add functional test for continuing a reindex (TheCharlatan)
201c1a9282 indexes: Don't wipe indexes again when already reindexing (TheCharlatan)
804f09dfa1 kernel: Add less confusing reindex options (Ryan Ofsky)
e172553223 validation: Remove needs_init from LoadBlockIndex (TheCharlatan)
533eab7d67 bugfix: Streamline setting reindex option (TheCharlatan)
Pull request description:
When restarting `bitcoind` during an ongoing reindex without setting the `-reindex` flag again, the block and coins db is left intact, but any data from the optional indexes is discarded. While not a bug per se, wiping the data again is
wasteful, both in terms of having to write it again, as well as potentially leading to longer startup times. So keep the index data instead when continuing a prior reindex.
Also includes a bugfix and smaller code cleanups around the reindexing code. The bug was introduced in b47bd95920: "kernel: De-globalize fReindex".
ACKs for top commit:
stickies-v:
ACK f68cba29b3
fjahr:
Code review ACK f68cba29b3
furszy:
Code review ACK f68cba29b3
ryanofsky:
Code review ACK f68cba29b3. Only changes since last review were cherry-picking suggested commits that rename variables, improving comments, and making some tweaks to test code.
Tree-SHA512: b252228cc76e9f1eaac56d5bd9e4eac23408e0fc04aeffd97a85417f046229364673ee1ca7410b9b6e7b692b03f13ece17c42a10176da0d7e975a8915deb98ca
This adds a bitset module that implements a BitSet<N> class, a variant
of std::bitset with a few additional features that cannot be implemented
in a wrapper without performance loss (specifically, finding first and
last bit set, or iterating over all set bits).
1f6ab1215b minor: remove unnecessary semicolons from RPC content type examples (Matthew Zipkin)
b225295298 test: use json-rpc 2.0 in all functional tests by default (Matthew Zipkin)
391843b029 bitcoin-cli: use json-rpc 2.0 (Matthew Zipkin)
d39bdf3397 test: remove unused variable in interface_rpc.py (Matthew Zipkin)
0ead71df8c doc: update and link for JSON-RPC 2.0 (Matthew Zipkin)
Pull request description:
This is a follow-up to #27101.
- Addresses [post-merge comments ](https://github.com/bitcoin/bitcoin/pull/27101#discussion_r1606723428)
- bitcoin-cli uses JSON-RPC 2.0
- functional tests use JSON-RPC 2.0 by default (exceptions are in the regression tests added by #27101)
ACKs for top commit:
tdb3:
ACK 1f6ab1215b
cbergqvist:
ACK 1f6ab1215b
Tree-SHA512: 49bf14c70464081280216ece538a2f5ec810bac80a86a83ad3284f0f1b017edf755a1a74a45be279effe00218170cafde7c2de58aed07097a95c2c6b837a6b6c
In order to ensure that the change of nVersion to a uint32_t in the
previous commit has no effect, rename nVersion to version in this commit
so that reviewers can easily spot if a spot was missed or if there is a
check somewhere whose semantics have changed.
30a01134cd [doc] update bips.md for 431 (glozow)
9dbe6a03f0 [test] wallet uses CURRENT_VERSION which is 2 (glozow)
539404fe0f [policy] make v3 transactions standard (glozow)
052ede75af [refactor] use TRUC_VERSION in place of 3 (glozow)
Pull request description:
Make `nVersion=3` (which is currently nonstandard on mainnet) standard.
Note that we will treat these transactions as Topologically Restricted Until Confirmation (TRUC). Spec is in BIP 431 and implementation is in #28948, #29306, and #29873
See #27463 for overall project tracking, and #29319 for information about relevance to cluster mempool.
ACKs for top commit:
sdaftuar:
utACK 30a01134c
achow101:
ACK 30a01134cd
instagibbs:
utACK 30a01134cd
murchandamus:
ACK 30a01134cd
ismaelsadeeq:
ACK 30a01134cd🛰️
Tree-SHA512: 2a4aec0442c860e792a061d83e36483c1f1b426f946efbdf664c8db97a596e498b535707e1d3a900218429486ea69fd4552e3d476526a6883cbd5556c6534b48
fa52e13ee8 test: Remove struct.pack from almost all places (MarcoFalke)
fa826db477 scripted-diff: test: Use int.to_bytes over struct packing (MarcoFalke)
faf2a975ad test: Use int.to_bytes over struct packing (MarcoFalke)
faf3cd659a test: Normalize struct.pack format (MarcoFalke)
Pull request description:
`struct.pack` has many issues:
* The format string consists of characters that may be confusing and may need to be looked up in the documentation, as opposed to using easy to understand self-documenting code.
This lead to many test bugs, which weren't hit, which is fine, but still confusing. Ref: https://github.com/bitcoin/bitcoin/pull/29400, https://github.com/bitcoin/bitcoin/pull/29399, https://github.com/bitcoin/bitcoin/pull/29363, fa3886b7c6, ...
Fix all issues by using the built-in `int` helpers `to_bytes` via a scripted diff.
Review notes:
* For `struct.pack` and `int.to_bytes` the error behavior is the same, although the error messages are not identical.
* Two `struct.pack` remain. One for float serialization in a C++ code comment, and one for native serialization.
ACKs for top commit:
achow101:
ACK fa52e13ee8
rkrux:
tACK [fa52e13](fa52e13ee8)
theStack:
Code-review ACK fa52e13ee8
Tree-SHA512: ee80d935b68ae43d1654b047e84ceb80abbd20306df35cca848b3f7874634b518560ddcbc7e714e2e7a19241e153dee64556dc4701287ae811e26e4f8c57fe3e
The helper assumes that the n and k values have to be provided as a
single byte push operation, which is only possible for values up to 16.
Fix that by passing the numbers directly to the CScript list, where it's
automatically converted to minimally-encoded pushes (see class
method `CScript.__coerce_instance`, branch `isinstance(other, int)`).
In case of 17..20, this means that the data-pushes are done with two
bytes using OP_PUSH1 (0x01), e.g. for n=20: 0x01,0x14
4444de152f test: Set mocktime in p2p_disconnect_ban.py to avoid intermittent test failure (MarcoFalke)
fa6aa4027c test: Fix typos and use names args (MarcoFalke)
Pull request description:
Otherwise, the test may fail on slow hardware when running in valgrind.
Also, use named args for the absolute timepoint, while touching this file.
ACKs for top commit:
tdb3:
ACK for 4444de152f
AngusP:
re-ACK 4444de152f
Tree-SHA512: 660269c8dd18887d69b284f38656899caf028159ce83ddf921f3e9c080a5d0e663989f0e42b4baf4c4939f20f34da0e7e844dff9b7c91d0cab570c60958bd0e1
07aba8dd21 functional test: ensure confirmed utxo being sourced for 2nd chain (Greg Sanders)
Pull request description:
The test could fail/stop testing what we want if non-confirmed utxos become sourced through some internal change to `MiniWallet`; better to just fetch confirmed explicitly.
ACKs for top commit:
achow101:
ACK 07aba8dd21
ismaelsadeeq:
utACK 07aba8dd21
theStack:
ACK 07aba8dd21
Tree-SHA512: 66795fdf881139ed91bde0f8239a46bd9bc70bb311fa97c0e2b5537e1fd2a1fd36bf3a225fc77b9695deb835a9d6d29879aa1e05ea5054b9a33a400e199da014
2451a217dd test: addmultisigaddress, coverage for script size limits (furszy)
53302a0981 bugfix: addmultisigaddress, add unsupported operation for redeem scripts over 520 bytes (furszy)
9be6065cc0 test: coverage for 16-20 segwit multisig scripts (furszy)
9d9a91c4ea rpc: bugfix, incorrect segwit redeem script size used in signrawtransactionwithkey (furszy)
0c9fedfc45 fix incorrect multisig redeem script size limit for segwit (furszy)
f7a173b578 test: rpc_createmultisig, decouple 'test_sortedmulti_descriptors_bip67' (furszy)
4f33dbd8f8 test: rpc_createmultisig, decouple 'test_mixing_uncompressed_and_compressed_keys' (furszy)
25a81705d3 test: rpc_createmultisig, remove unnecessary checkbalances() (furszy)
b5a3289433 test: refactor, multiple cleanups in rpc_createmultisig.py (furszy)
3635d43268 test: rpc_createmultisig, remove manual wallet initialization (furszy)
Pull request description:
Fixing https://github.com/bitcoin/bitcoin/issues/28250#issuecomment-1674830104 and more.
Currently, redeem scripts longer than 520 bytes, which are technically valid under segwit rules, have flaws in the following processes:
1) The multisig creation process fails to deduce the output descriptor, resulting in the generation of an incorrect descriptor. Additionally, the accompanying user warning is also inaccurate.
2) The `signrawtransactionwithkey` RPC command fail to sign them.
3) The legacy wallet `addmultisigaddress` wrongly discards them.
The issue arises because most of these flows are utilizing the legacy spkm keystore, which imposes
the [p2sh max redeem script size rule](ded6873340/src/script/signingprovider.cpp (L160)) on all scripts. Which blocks segwit redeem scripts longer than
the max element size in all the previously mentioned processes (`createmultisig`, `addmultisigaddress`, and
`signrawtransactionwithkey`).
This PR fixes the problem, enabling the creation of multisig output descriptors involving more than 15 keys and
allowing the signing of these scripts, along with other post-segwit redeem scripts that surpass the 520-byte
p2sh limit.
Important note:
Instead of adding support for these longer redeem scripts in the legacy wallet, an "unsupported operation"
error has been added. The reasons behind this decision are:
1) The introduction of this feature brings about a compatibility-breaking change that requires downgrade
protection; older wallets would be unable to interact with these "new" legacy wallets.
2) Considering the ongoing deprecation of the legacy spkm, this issue provides another compelling
reason to transition towards descriptors.
Testing notes:
To easily verify each of the fixes, I decoupled the tests into standalone commits. So they can be
cherry-picked on top of master. Where `rpc_createmultisig.py` (with and without the `--legacy-wallet`
arg) will fail without the bugs fixes commits.
Extra note:
The initial commits improves the `rpc_createmultisig.py` test in many ways. I found this test very
antiquated, screaming for an update and cleanup.
ACKs for top commit:
pinheadmz:
ACK 2451a217dd
theStack:
Code-review ACK 2451a217dd
achow101:
ACK 2451a217dd
Tree-SHA512: 71794533cbd46b3a1079fb4e9d190d3ea3b615de0cbfa443466e14f05e4616ca90e12ce2bf07113515ea8113e64a560ad572bb9ea9d4835b6fb67b6ae596167f
df6dc2aaae test: Assumeutxo: snapshots with less work should not be loaded (Hernan Marino)
Pull request description:
This PR adds a test which checks that snapshots with less accumulated work than the node's active chain, should not be loaded and return with an error. Although in a different context of discussion the missing test was detect in a thread in https://github.com/bitcoin/bitcoin/pull/29394 (see https://github.com/bitcoin/bitcoin/pull/29394#discussion_r1484122214)
ACKs for top commit:
maflcko:
utACK df6dc2aaae
kevkevinpal:
utACK [df6dc2a](df6dc2aaae)
achow101:
ACK df6dc2aaae
alfonsoromanz:
Re ACK df6dc2aaae. Make is successful and the test passes.
Tree-SHA512: 07a394b4b288cc8ad3f66ed4e70dcda468db18113e9442eb7215cf491768432d55efaaa5b79d633094917e05475a30f0c5e4f64f8f2da293ba306891b4485560
71aae72e1f test: test sendall does ancestor aware funding (ishaanam)
36757941a0 wallet, rpc: implement ancestor aware funding for sendall (ishaanam)
544131f3fb rpc, test: test sendall spends unconfirmed change and unconfirmed inputs when specified (ishaanam)
Pull request description:
This PR:
- Adds a functional test that `sendall` spends unconfirmed change
- Adds a functional test that `sendall` spends regular unconfirmed inputs when specified by user
- Adds ancestor aware funding to `sendall` by using `calculateCombinedBumpFee` and adjusting the effective value accordingly
- Adds a functional test for ancestor aware funding in `sendall`
ACKs for top commit:
S3RK:
ACK 71aae72e1f
achow101:
ACK 71aae72e1f
furszy:
ACK 71aae72e1f
Tree-SHA512: acaeb7c65166ce53123a1d6cb5012197202246acc02ef9f37a28154cc93afdbd77c25e840ab79bdc7e0b88904014a43ab1ddea79d5337dc310ea210634ab61f0
This removes the need to actually track misbehavior score (see further commit), because any
Misbehaving node will immediately hit the discouragement threshold.
This misbehavior was originally intended to prevent bandwidth wastage due to
actually observed very broken (but likely non-malicious) nodes that respond
to GETHEADERS with a response unrelated to the request, triggering a request
cycle.
This has however largely been addressed by the previous commit, which causes
non-connecting HEADERS that are received while a GETHEADERS has not been
responded to, to be ignored, as long as they do not time out (2 minutes).
With that, the specific misbehavior is largely irrelevant (for inbound peers,
it is now harmless; for outbound peers, the eviction logic will eventually
kick them out if they're not keeping up with headers at all).
Since https://github.com/bitcoin/bitcoin/pull/25454 we keep track of the last
GETHEADERS request that was sent and wasn't responded to. So far, every incoming
HEADERS message is treated as a response to whatever GETHEADERS was last sent,
regardless of its contents.
This commit makes this tracking more accurate, by only treating HEADERS messages
which (1) are empty, (2) connect to our existing block header tree, or (3) are a
continuation of a low-work headers sync as responses that clear the "outstanding
GETHEADERS" state (m_last_getheaders_timestamp).
That means that HEADERS messages which do not satisfy any of the above criteria
will be ignored, not triggering a GETHEADERS, and potentially (for now, but see
later commit) increase misbehavior score.
4b7d984269 lint: add markdown hyperlink checker (willcl-ark)
Pull request description:
Potential followup to: #30025
This should prevent us reintroducing broken markdown links.
It does not test "online" (external) links, only those within this repo. Both relative and absolute links are parsed successfully if they resolve.
ACKs for top commit:
maflcko:
re-utACK 4b7d984269
davidgumberg:
reACK 4b7d984269
Tree-SHA512: 9bc40d700b73499c046bb76157bc139f32ec3850f64ef813bbf7f18f9c01a253abe6a857d6f559890165f2bd26e7742c05d86232cd9b8efb33ff85d735f4f095
Currently, transport version is a global variable declared as
TRANSPORT_VERSION in v2_p2p.py. Making it an instance variable
would help in sending non empty transport version packets for
testing purposes. It might also help EncryptedP2PState be more
extensible in far future protocol upgrades.
This adds a markdown hyperlink check task to the lint test_runner. It
relies on having the [`mlc`](https://crates.io/crates/mlc) binary found
on $PATH, but will fail with `success` if the binary is not found.
`mlc` is also added to the ci/04_install.sh script run by the
containerfile.
Note that broken markdown hyperlinks will be detected in untracked
markdown files found in a dirty working directory (including e.g.
.venv).
2fd34ba504 Add sanity checks for various ATMPArgs booleans (Greg Sanders)
20d8936d8b [refactor] make some members MemPoolAccept-wide (glozow)
cbbfe719b2 cpfp carveout is excluded in packages (glozow)
69f7ab05ba Add m_allow_sibling_eviction as separate ATMPArgs flag (Greg Sanders)
57ee3029dd Add description for m_test_accept (Greg Sanders)
Pull request description:
First few commits of https://github.com/bitcoin/bitcoin/pull/28984 to set the stage for the package RBF logic.
These refactors are preparation for evaluating an RBF in a multi-proposed-transaction context instead of only a single proposed transaction. Also, carveouts and sibling evictions only should work in single RBF cases so add logic to preclude multi-tx cases in the future.
No behavior changes aside from bailing earlier from failed carve-outs.
ACKs for top commit:
glozow:
reACK 2fd34ba504 via range-diff
sr-gi:
utACK [2fd34ba](2fd34ba504)
theStack:
re-ACK 2fd34ba504
Tree-SHA512: 5071c5b8d9b8d2c9faa278c8c4df31de288cb407a68e4d55544c588caff6c86160cce7825453549c6ed69e29d9ccb5ee2d4a518b18f563bfb12f2ced073fe42a
542e13b293 rpc: Enhance metadata of the dumptxoutset output (Fabian Jahr)
4d8e5edbaa assumeutxo: Add documentation on dumptxoutset serialization format (Fabian Jahr)
c14ed7f384 assumeutxo: Add test for changed coin size value (Fabian Jahr)
de95953d87 rpc: Optimize serialization disk space of dumptxoutset (Fabian Jahr)
Pull request description:
The second attempt at implementing the `dumptxoutset` space optimization as suggested in #25675. Closes#25675.
This builds on the work done in #26045, addresses open feedback, adds some further improvements (most importantly usage of compact size), documentation, and an additional test.
The [original snapshot at height 830,000](https://github.com/bitcoin/bitcoin/pull/29551) came in at 10.82 GB. With this change, the same snapshot is 8.94 GB, a reduction of 17.4%.
This also enhances the metadata of the output file and adds the following data to allow for better error handling and make future upgrades easier:
- A newly introduced utxo set magic
- A version number
- The network magic
- The block height
ACKs for top commit:
achow101:
ACK 542e13b293
TheCharlatan:
Re-ACK 542e13b293
theStack:
ACK 542e13b293
Tree-SHA512: 0825d30e5c3c364062db3c6cbca4e3c680e6e6d3e259fa70c0c2b2a7020f24a47406a623582040988d5c7745b08649c31110df4c10656aa25f3f27eb35843d99
The behavior is not new, but this rule exits earlier than before.
Previously, a carve out could have been granted in PreChecks() but then
nullified in PackageMempoolChecks() when CheckPackageLimits() is called
with the default limits.
154b2b2296 [fuzz] V3_MAX_VSIZE and effective ancestor/descendant size limits (glozow)
a29f1df289 [policy] restrict all v3 transactions to 10kvB (glozow)
d578e2e354 [policy] explicitly require non-v3 for CPFP carve out (glozow)
Pull request description:
Opening for discussion / conceptual review.
We like the idea of a smaller maximum transaction size because:
- It lowers potential replacement cost (i.e. harder to do Rule 3 pinning via gigantic transaction)
- They are easier to bin-pack in block template production
- They equate to a tighter memory limit in data structures that are bounded by a number of transactions (e.g. orphanage and vExtraTxnForCompact). For example, the current memory bounds for orphanage is 100KvB * 100 = 40MB, and guaranteeing 1 tx per peer would require reserving a pretty large space.
History for `MAX_STANDARD_TX_WEIGHT=100KvB` (copied from https://github.com/bitcoin/bitcoin/pull/29873#issuecomment-2115459510):
- 2010-09-13 In 3df62878c3 satoshi added a 100kB (MAX_BLOCK_SIZE_GEN/5 with MBS_GEN = MAX_BLOCK_SIZE/2) limit on new transactions in CreateTransaction()
- 2013-02-04 https://github.com/bitcoin/bitcoin/pull/2273 In gavin gave that constant a name, and made it apply to transaction relay as well
Lowering `MAX_STANDARD_TX_WEIGHT` for all txns is not being proposed, as there are existing apps/protocols that rely on large transactions. However, it's been brought up that we should consider this for TRUCs (which is especially designed to avoid Rule 3 pinning).
This reduction should be ok because using nVersion=3 isn't standard yet, so this wouldn't break somebody's existing use case. If we find that this is too small, we can always increase it later. Decreasing would be much more difficult.
~[Expected size of a commitment transaction](https://github.com/lightning/bolts/blob/master/03-transactions.md#expected-weight-of-the-commitment-transaction) is within (900 + 172 * 483 + 224) / 4 = 21050vB~ EDIT: this is incorrect, but perhaps not something that should affect how we choose this number.
ACKs for top commit:
sdaftuar:
ACK 154b2b2296
achow101:
ACK 154b2b2296
instagibbs:
ACK 154b2b2296
t-bast:
ACK 154b2b2296
murchandamus:
crACK 154b2b2296
Tree-SHA512: 89392a460908a8ea9f547d90e00f5181de0eaa9d2c4f2766140a91294ade3229b3d181833cad9afc93a0d0e8c4b96ee2f5aeda7c50ad7e6f3a8320b9e0c5ae97
6629d1d0f8 test: improve robustness of connect_nodes() (furszy)
Pull request description:
Decoupled from #27837 because this can help other too, found it investigating a CI failure https://cirrus-ci.com/task/5805115213348864?logs=ci#L3200.
The `connect_nodes` function in the test framework relies on a stable number of peer
connections to verify that the new connection between the nodes is successfully established.
This approach is fragile, as any of the peers involved in the process can drop, lose, or
create a connection at any step, causing subsequent `wait_until` checks to stall indefinitely
even when the peers in question were connected successfully.
This commit improves the situation by using the nodes' subversion and the connection
direction (inbound/outbound) to identify the exact peer connection and perform the
checks exclusively on it.
ACKs for top commit:
stratospher:
reACK 6629d1d.
achow101:
ACK 6629d1d0f8
maflcko:
utACK 6629d1d0f8
AngusP:
re-ACK 6629d1d0f8
Tree-SHA512: 5f345c0ce49ea81b643e97c5cffd133e182838752c27592fcdeac14ad10919fb4b7ff38e289e42a7c3c638a170bd0d0b7a9cd493898997a2082a7b7ceef4aeeb
1e54d61c46 test: add coverage for `mapped_as` from `getrawaddrman` (brunoerg)
8c2714907d net: rpc: return peer's mapped AS in getrawaddrman (brunoerg)
Pull request description:
This PR adds two new fields in `getrawaddrman` RPC: "mapped_as" and "source_mapped_as". These fields are used to return the ASN (Autonomous System Number) mapped to the peer and its source. With these informations we can have a better view of the bucketing logic with ASMap specially in projects like [addrman-observer](https://github.com/0xb10c/addrman-observer).
ACKs for top commit:
fjahr:
Code review ACK 1e54d61c46
virtu:
ACK [1e54d61](1e54d61c46)
0xB10C:
ACK 1e54d61c46
glozow:
ACK 1e54d61c46
Tree-SHA512: af86bcc7a2e69bebd3fa9eaa2e527e0758c44c0a958de7292514d5f99f8f01f5df3bae11400451268e0255f738ff3acccc77f48fe129937512f1e9d9963c4c5e
Test addresses are being mapped according to the ASMap
file provided properly. Compare the result of the `getrawaddrman`
RPC with the result from the ASMap Health Check.
b3efb48673 protocol: make message types constexpr (Vasil Dimov)
2fa9de06c2 net: make the list of known message types a compile time constant (Vasil Dimov)
Pull request description:
Turn the `std::vector` to `std::array` because it is cheaper and allows us to have the number of the messages as a compile time constant: `ALL_NET_MESSAGE_TYPES.size()` which can be used in future code to build other `std::array`s with that size.
---
This change is part of https://github.com/bitcoin/bitcoin/pull/29418 but it makes sense on its own and would be good to have it, regardless of the fate of https://github.com/bitcoin/bitcoin/pull/29418. Also, if this is merged, that would reduce the size of https://github.com/bitcoin/bitcoin/pull/29418, thus the current standalone PR.
ACKs for top commit:
achow101:
ACK b3efb48673
jonatack:
ACK b3efb48673
maflcko:
utACK b3efb48673🎊
willcl-ark:
ACK b3efb48673
Tree-SHA512: 6d3860c138c64514ebab13d97ea67893e2d346dfac30a48c3d9bc769a1970407375ea4170afdb522411ced306a14a9af4eede99e964d1fb1ea3efff5d5eb57af
The 'connect_nodes' function in the test framework relies
on a stable number of peer connections to verify the new
connection between the nodes is successfully established.
This approach is fragile, as any of the peers involved in
the process can drop, lose, or create a connection at any
step, causing subsequent 'wait_until' checks to stall
indefinitely even when the peers in question are connected
successfully.
This commit improves the situation by using the nodes' subversion
and the connection direction (inbound/outbound) to identify the
exact peer connection and perform the checks exclusively on it.
d51fbab4b3 wallet, test: Be able to always swap BDB endianness (Ava Chow)
0b753156ce test: Test bdb_ro dump of wallet without reset LSNs (Ava Chow)
c1984f1282 test: Test dumping dbs with overflow pages (Ava Chow)
fd7b16e391 test: Test dumps of other endian BDB files (Ava Chow)
6ace3e953f bdb: Be able to make byteswapped databases (Ava Chow)
d9878903fb Error if LSNs are not reset (Ava Chow)
4d7a3ae78e Berkeley RO Database fuzz test (TheCharlatan)
3568dce9e9 tests: Add BerkeleyRO to db prefix tests (Ava Chow)
70cfbfdadf wallettool: Optionally use BERKELEY_RO as format when dumping BDB wallets (Ava Chow)
dd57713f6e Add MakeBerkeleyRODatabase (Ava Chow)
6e50bee67d Implement handling of other endianness in BerkeleyRODatabase (Ava Chow)
cdd61c9cc1 wallet: implement independent BDB deserializer in BerkeleyRODatabase (Ava Chow)
ecba230979 wallet: implement BerkeleyRODatabase::Backup (Ava Chow)
0c8e728476 wallet: implement BerkeleyROBatch (Ava Chow)
756ff9b478 wallet: add dummy BerkeleyRODatabase and BerkeleyROBatch classes (Ava Chow)
ca18aea5c4 Add AutoFile::seek and tell (Ava Chow)
Pull request description:
Split from #26596
This PR adds `BerkeleyRODatabase` which is an independent implementation of a BDB file parser. It provides read only access to a BDB file, and can therefore be used as a read only database backend for wallets. This will be used for dumping legacy wallet records and migrating legacy wallets without the need for BDB itself.
Wallettool's `dump` command is changed to use `BerkeleyRODatabase` instead of `BerkeleyDatabase` (and `CWallet` itself) to demonstrate that this parser works and to test it against the existing wallettool functional tests.
ACKs for top commit:
josibake:
reACK d51fbab4b3
TheCharlatan:
Re-ACK d51fbab4b3
furszy:
reACK d51fbab4b3
laanwj:
re-ACK d51fbab4b3
theStack:
ACK d51fbab4b3
Tree-SHA512: 1e7b97edf223b2974eed2e9eac1179fc82bb6359e0a66b7d2a0c8b9fa515eae9ea036f1edf7c76cdab2e75ad994962b134b41056ccfbc33b8d54f0859e86657b
8950053636 test: remove unneeded `-maxorphantx=1000` settings (Sebastian Falbesoner)
Pull request description:
It's unclear what the motivation for increasing the orphan pool is here, and it seems that this not needed at all. None of these tests involve orphan transactions explicitly, and if they would occur occasionally, there is no good reason to prefer a value of 1000 over the default of 100 (see DEFAULT_MAX_ORPHAN_TRANSACTIONS).
ACKs for top commit:
maflcko:
utACK 8950053636
edilmedeiros:
Tested ACK 8950053636
AngusP:
tACK 8950053636
glozow:
ACK 8950053636 From skimming the tests, it appears that none of these need a larger `-maxorphantx`.
Tree-SHA512: 81d4a4fb2ea92b97119f21cbc6c4b1240d863269932e6adf4982aead9726f20652523a4707add3ad38eb332d4452de41de6735265f22e62298f3b4b45de75a57
9365baa489 test: add conflicting topology test case (Greg Sanders)
Pull request description:
We want to ensure that even if topologies
that are acceptable are relaxed, like
removing package-not-child-with-unconfirmed-parents, that we don't end up accepting packages we shouldn't.
ACKs for top commit:
glozow:
reACK 9365baa489
rkrux:
reACK [9365baa](9365baa489)
Tree-SHA512: d58661064ca099ac0447c331a5020c74c0cdfe24259aa875592805bbd63de1bf23aa7ced9ff485fef90dc0602fcb997e631aaf1aa2e9805d2cf5f0e5c9b2f0e2
It is best to store all key origin information
(master key fingerprint and all derivation steps)
in the multisig descriptor. Being explicit with
this information should be beneficial if this approach
is used with other wallets/signers (whether hardware
or software). There is no harm including all of this
with xpubs (if anything it simplifies the test code)
and makes this example/docs more complete and safer
incase it is referenced by others.
It's unclear what the motivation for increasing the orphan pool is, and
it seems that this not needed at all. None of these tests involve orphan
transactions explicitly, and if they would occur occasionally, there is
no good reason to prefer a value of 1000 over the default of 100 (see
DEFAULT_MAX_ORPHAN_TRANSACTIONS).
9408a04e42 tests, fuzz: use new NUMS_H const (josibake)
b946f8a4c5 crypto: add NUMS_H const (josibake)
Pull request description:
Broken out from #28122
---
[BIP341](https://github.com/bitcoin/bips/blob/master/bip-0341.mediawiki#constructing-and-spending-taproot-outputs) defines a NUMS point `H` as *H = lift_x(0x50929b74c1a04954b78b4b6035e97a5e078a5a0f28ec96d547bfee9ace803ac0)* which is [constructed](11af7015de/src/modules/rangeproof/main_impl.h (L16)) by taking the hash of the standard uncompressed encoding of the [secp256k1](https://www.secg.org/sec2-v2.pdf) base point G as X coordinate."
Add this as a constant so it can be used in our codebase. My primary motivation is BIP352 specifies a special case for when taproot spends use `H` as the internal key, but outside of BIP352 it seems generally useful to have `H` in the codebase, for testing or other use cases.
ACKs for top commit:
paplorinc:
re-ACK 9408a04e42
achow101:
ACK 9408a04e42
theStack:
Code-review ACK 9408a04e42
Tree-SHA512: ad84492f5d635c0cb05bd82546079ded7e5138e95361f20d8285a9ad6e69c10ee2cc3fe46e16b46ef03c4253c8bee1051911c6b91264c90c3b1ad33a824bff4b
Currently, we log the number of bytes of garbage when it is
generated. The log is a better fit for when the garbage
actually gets sent to the transport layer.
cbc6c440e3 doc: add comments and release-notes for JSON-RPC 2.0 (Matthew Zipkin)
e7ee80dcf2 rpc: JSON-RPC 2.0 should not respond to "notifications" (Matthew Zipkin)
bf1a1f1662 rpc: Avoid returning HTTP errors for JSON-RPC 2.0 requests (Matthew Zipkin)
466b90562f rpc: Add "jsonrpc" field and drop null "result"/"error" fields (Matthew Zipkin)
2ca1460ae3 rpc: identify JSON-RPC 2.0 requests (Matthew Zipkin)
a64a2b77e0 rpc: refactor single/batch requests (Matthew Zipkin)
df6e3756d6 rpc: Avoid copies in JSONRPCReplyObj() (Matthew Zipkin)
09416f9ec4 test: cover JSONRPC 2.0 requests, batches, and notifications (Matthew Zipkin)
4202c170da test: refactor interface_rpc.py (Matthew Zipkin)
Pull request description:
Closes https://github.com/bitcoin/bitcoin/issues/2960
Bitcoin Core's JSONRPC server behaves with a special blend of 1.0, 1.1 and 2.0 behaviors. This introduces compliance issues with more strict clients. There are the major misbehaviors that I found:
- returning non-200 HTTP codes for RPC errors like "Method not found" (this is not a server error or an HTTP error)
- returning both `"error"` and `"result"` fields together in a response object.
- different error-handling behavior for single and batched RPC requests (batches contain errors in the response but single requests will actually throw HTTP errors)
https://github.com/bitcoin/bitcoin/pull/15495 added regression tests after a discussion in https://github.com/bitcoin/bitcoin/pull/15381 to kinda lock in our RPC behavior to preserve backwards compatibility.
https://github.com/bitcoin/bitcoin/pull/12435 was an attempt to allow strict 2.0 compliance behind a flag, but was abandoned.
The approach in this PR is not strict and preserves backwards compatibility in a familiar bitcoin-y way: all old behavior is preserved, but new rules are applied to clients that opt in. One of the rules in the [JSON RPC 2.0 spec](https://www.jsonrpc.org/specification#request_object) is that the kv pair `"jsonrpc": "2.0"` must be present in the request. Well, let's just use that to trigger strict 2.0 behavior! When that kv pair is included in a request object, the [response will adhere to strict JSON-RPC 2.0 rules](https://www.jsonrpc.org/specification#response_object), essentially:
- always return HTTP 200 "OK" unless there really is a server error or malformed request
- either return `"error"` OR `"result"` but never both
- same behavior for single and batch requests
If this is merged next steps can be:
- Refactor bitcoin-cli to always use strict 2.0
- Refactor the python test framework to always use strict 2.0 for everything
- Begin deprecation process for 1.0/1.1 behavior (?)
If we can one day remove the old 1.0/1.1 behavior we can clean up the rpc code quite a bit.
ACKs for top commit:
cbergqvist:
re ACK cbc6c440e3
ryanofsky:
Code review ACK cbc6c440e3. Just suggested changes since the last review: changing uncaught exception error code from PARSE_ERROR to MISC_ERROR, renaming a few things, and adding comments.
tdb3:
re ACK for cbc6c440e3
Tree-SHA512: 0b702ed32368b34b29ad570d090951a7aeb56e3b0f2baf745bd32fdc58ef68fee6b0b8fad901f1ca42573ed714b150303829cddad4a34ca7ad847350feeedb36
