diff --git a/doc/man/bitcoin-cli.1 b/doc/man/bitcoin-cli.1
index 571b5f75de..f7c8a43798 100644
--- a/doc/man/bitcoin-cli.1
+++ b/doc/man/bitcoin-cli.1
@@ -1,13 +1,13 @@
 .\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
-.TH BITCOIN-CLI "1" "October 2023" "bitcoin-cli v25.1.0" "User Commands"
+.TH BITCOIN-CLI "1" "November 2023" "bitcoin-cli v25.1.0" "User Commands"
 .SH NAME
 bitcoin-cli \- manual page for bitcoin-cli v25.1.0
 .SH SYNOPSIS
 .B bitcoin-cli
-[\fI\,options\/\fR] \fI\,<command> \/\fR[\fI\,params\/\fR]  \fI\,Send command to Bitcoin Core\/\fR
+[\fI\,options\/\fR] \fI\,<command> \/\fR[\fI\,params\/\fR]  \fI\,Send command to Bitcoin Knots\/\fR
 .br
 .B bitcoin-cli
-[\fI\,options\/\fR] \fI\,-named <command> \/\fR[\fI\,name=value\/\fR]...  \fI\,Send command to Bitcoin Core (with named arguments)\/\fR
+[\fI\,options\/\fR] \fI\,-named <command> \/\fR[\fI\,name=value\/\fR]...  \fI\,Send command to Bitcoin Knots (with named arguments)\/\fR
 .br
 .B bitcoin-cli
 [\fI\,options\/\fR] \fI\,help                List commands\/\fR
@@ -15,7 +15,7 @@ bitcoin-cli \- manual page for bitcoin-cli v25.1.0
 .B bitcoin-cli
 [\fI\,options\/\fR] \fI\,help <command>      Get help for a command\/\fR
 .SH DESCRIPTION
-Bitcoin Core RPC client version v25.1.0
+Bitcoin Knots RPC client version v25.1.0
 .SH OPTIONS
 .HP
 \-?
@@ -39,6 +39,12 @@ and OS is not WIN32), never.
 Specify configuration file. Relative paths will be prefixed by datadir
 location. (default: bitcoin.conf)
 .HP
+\fB\-confrw=\fR<file>
+.IP
+Specify read/write configuration file. Relative paths will be prefixed
+by the network\-specific datadir location. (default:
+bitcoin_rw.conf)
+.HP
 \fB\-datadir=\fR<dir>
 .IP
 Specify data directory
@@ -54,11 +60,12 @@ nblocks and maxtries arguments. Example: bitcoin\-cli \fB\-generate\fR 4
 .HP
 \fB\-getinfo\fR
 .IP
-Get general information from the remote server. Note that unlike
-server\-side RPC calls, the output of \fB\-getinfo\fR is the result of
-multiple non\-atomic requests. Some entries in the output may
-represent results from different states (e.g. wallet balance may
-be as of a different block from the chain state reported)
+Get general information from the remote server, including the total
+balance and the balances of each loaded wallet when in
+multiwallet mode. Note that \fB\-getinfo\fR is the combined result of
+several RPCs (getnetworkinfo, getblockchaininfo, getwalletinfo,
+getbalances, and in multiwallet mode, listwallets), each with
+potentially different state.
 .HP
 \fB\-named\fR
 .IP
@@ -153,6 +160,12 @@ signet, regtest
 Use the signet chain. Equivalent to \fB\-chain\fR=\fI\,signet\/\fR. Note that the network
 is defined by the \fB\-signetchallenge\fR parameter
 .HP
+\fB\-signetblocktime\fR
+.IP
+Difficulty adjustment will target a block time of the given amount in
+seconds (only for custom signet networks, must have
+\fB\-signetchallenge\fR set; defaults to 10 minutes)
+.HP
 \fB\-signetchallenge\fR
 .IP
 Blocks must satisfy the given script to be considered valid (only for
@@ -172,9 +185,9 @@ Use the test chain. Equivalent to \fB\-chain\fR=\fI\,test\/\fR.
 .SH COPYRIGHT
 Copyright (C) 2009-2023 The Bitcoin Core developers
 
-Please contribute if you find Bitcoin Core useful. Visit
-<https://bitcoincore.org/> for further information about the software.
-The source code is available from <https://github.com/bitcoin/bitcoin>.
+Please contribute if you find Bitcoin Knots useful. Visit
+<https://bitcoinknots.org/> for further information about the software.
+The source code is available from <https://github.com/bitcoinknots/bitcoin>.
 
 This is experimental software.
 Distributed under the MIT software license, see the accompanying file COPYING
diff --git a/doc/man/bitcoin-qt.1 b/doc/man/bitcoin-qt.1
index c2d3f73d57..cc2b1657e3 100644
--- a/doc/man/bitcoin-qt.1
+++ b/doc/man/bitcoin-qt.1
@@ -1,12 +1,12 @@
 .\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
-.TH BITCOIN-QT "1" "October 2023" "bitcoin-qt v25.1.0" "User Commands"
+.TH BITCOIN-QT "1" "November 2023" "bitcoin-qt v25.1.0" "User Commands"
 .SH NAME
 bitcoin-qt \- manual page for bitcoin-qt v25.1.0
 .SH SYNOPSIS
 .B bitcoin-qt
-[\fI\,command-line options\/\fR]
+[\fI\,command-line options\/\fR] [\fI\,URI\/\fR]
 .SH DESCRIPTION
-Bitcoin Core version v25.1.0
+Bitcoin Knots version v25.1.0
 .SH OPTIONS
 .HP
 \-?
@@ -18,12 +18,17 @@ Print this help message and exit
 Execute command when an alert is raised (%s in cmd is replaced by
 message)
 .HP
+\fB\-allowignoredconf\fR
+.IP
+For backwards compatibility, treat an unused bitcoin.conf file in the
+datadir as a warning, not an error.
+.HP
 \fB\-assumevalid=\fR<hex>
 .IP
 If this block is in the chain assume that it and its ancestors are valid
 and potentially skip their script verification (0 to verify all,
 default:
-000000000000000000035c3f0d31e71a5ee24c5aaf3354689f65bd7b07dee632,
+000000000000000000003d97a46dbbb4cca4b3e23c39c446df75cfe726163bb5,
 testnet:
 0000000000000021bc50a89cde4870d4a81ffe0153b3c8de77b435a2fd3f6761,
 signet:
@@ -32,8 +37,8 @@ signet:
 \fB\-blockfilterindex=\fR<type>
 .IP
 Maintain an index of compact filters by block (default: 0, values:
-basic). If <type> is not supplied or if <type> = 1, indexes for
-all known types are enabled.
+basic, v0). If <type> is not supplied or if <type> = 1, certain
+indexes are enabled (currently just basic).
 .HP
 \fB\-blocknotify=\fR<cmd>
 .IP
@@ -53,9 +58,9 @@ Specify directory to hold blocks subdirectory for *.dat files (default:
 \fB\-blocksonly\fR
 .IP
 Whether to reject transactions from network peers. Automatic broadcast
-and rebroadcast of any transactions from inbound peers is
-disabled, unless the peer has the 'forcerelay' permission. RPC
-transactions are not affected. (default: 0)
+and rebroadcast of any transactions from any peer is disabled,
+unless it has the 'forcerelay' permission. RPC transactions are
+not affected. (default: 0)
 .HP
 \fB\-coinstatsindex\fR
 .IP
@@ -67,6 +72,16 @@ Specify path to read\-only configuration file. Relative paths will be
 prefixed by datadir location (only useable from command line, not
 configuration file) (default: bitcoin.conf)
 .HP
+\fB\-confrw=\fR<file>
+.IP
+Specify read/write configuration file. Relative paths will be prefixed
+by the network\-specific datadir location (default:
+bitcoin_rw.conf)
+.HP
+\fB\-corepolicy\fR
+.IP
+Use Bitcoin Core policy defaults (default: false)
+.HP
 \fB\-daemon\fR
 .IP
 Run in the background as a daemon and accept commands (default: 0)
@@ -82,7 +97,7 @@ Specify data directory
 .HP
 \fB\-dbcache=\fR<n>
 .IP
-Maximum database cache size <n> MiB (4 to 16384, default: 450). In
+Maximum database cache size <n> MiB (4 to 1048576, default: 450). In
 addition, unused mempool memory is shared for this cache (see
 \fB\-maxmempool\fR).
 .HP
@@ -101,6 +116,11 @@ Specify additional configuration file, relative to the \fB\-datadir\fR path
 .IP
 Imports blocks from external file on startup
 .HP
+\fB\-lowmem=\fR<n>
+.IP
+If system available memory falls below <n> MiB, flush caches (0 to
+disable, default: 10)
+.HP
 \fB\-maxmempool=\fR<n>
 .IP
 Keep the transaction memory pool below <n> megabytes (default: 300)
@@ -116,7 +136,7 @@ Do not keep transactions in the mempool longer than <n> hours (default:
 .HP
 \fB\-par=\fR<n>
 .IP
-Set the number of script verification threads (\fB\-10\fR to 15, 0 = auto, <0 =
+Set the number of script verification threads (0 = auto, up to 15, <0 =
 leave that many cores free, default: 0)
 .HP
 \fB\-persistmempool\fR
@@ -143,7 +163,9 @@ target size in MiB)
 \fB\-reindex\fR
 .IP
 Rebuild chain state and block index from the blk*.dat files on disk.
-This will also rebuild active optional indexes.
+This will also rebuild active optional indexes. Setting this to
+auto automatically reindexes the block database if it is
+corrupted.
 .HP
 \fB\-reindex\-chainstate\fR
 .IP
@@ -338,7 +360,7 @@ Serve compact block filters to peers per BIP 157 (default: 0)
 \fB\-peerbloomfilters\fR
 .IP
 Support filtering of blocks and transaction with bloom filters (default:
-0)
+1)
 .HP
 \fB\-port=\fR<port>
 .IP
@@ -371,40 +393,53 @@ to connect is unsuccessful after this amount of time, drop it
 .HP
 \fB\-torcontrol=\fR<ip>:<port>
 .IP
-Tor control port to use if onion listening enabled (default:
-127.0.0.1:9051)
+Tor control host and port to use if onion listening enabled (default:
+127.0.0.1:9051). If no port is specified, the default port of
+9051 will be used.
+.HP
+\fB\-torexecute=\fR<command>
+.IP
+Tor command to use if not already running (default: tor)
 .HP
 \fB\-torpassword=\fR<pass>
 .IP
 Tor control port password (default: empty)
 .HP
+\fB\-uaappend=\fR<cmt>
+.IP
+Append literal to the user agent string (should only be used for
+software embedding)
+.HP
 \fB\-upnp\fR
 .IP
-Use UPnP to map the listening port (default: 1 when listening and no
-\fB\-proxy\fR)
+Use UPnP to map the listening port (default: 0)
 .HP
 \fB\-whitebind=\fR<[permissions@]addr>
 .IP
 Bind to the given address and add permission flags to the peers
 connecting to it. Use [host]:port notation for IPv6. Allowed
 permissions: bloomfilter (allow requesting BIP37 filtered blocks
-and transactions), noban (do not ban for misbehavior; implies
+and transactions), blockfilters (serve compact block filters to
+peers per BIP157), noban (do not ban for misbehavior; implies
 download), forcerelay (relay transactions that are already in the
 mempool; implies relay), relay (relay even in \fB\-blocksonly\fR mode,
 and unlimited transaction announcements), mempool (allow
 requesting BIP35 mempool contents), download (allow getheaders
 during IBD, no disconnect after maxuploadtarget limit), addr
 (responses to GETADDR avoid hitting the cache and contain random
-records with the most up\-to\-date info). Specify multiple
+records with the most up\-to\-date info), forceinbound (when
+connections are full, attempt to evict a random unprotected
+inbound peer to open a slot; implies noban). Specify multiple
 permissions separated by commas (default:
 download,noban,mempool,relay). Can be specified multiple times.
 .HP
 \fB\-whitelist=\fR<[permissions@]IP address or network>
 .IP
-Add permission flags to the peers connecting from the given IP address
-(e.g. 1.2.3.4) or CIDR\-notated network (e.g. 1.2.3.0/24). Uses
-the same permissions as \fB\-whitebind\fR. Can be specified multiple
-times.
+Add permission flags to the peers using the given IP address (e.g.
+1.2.3.4) or CIDR\-notated network (e.g. 1.2.3.0/24). Uses the same
+permissions as \fB\-whitebind\fR. Additional flags "in" and "out"
+control whether permissions apply to incoming connections and/or
+outgoing (default: both). Can be specified multiple times.
 .PP
 Wallet options:
 .HP
@@ -486,7 +521,7 @@ Spend unconfirmed change when sending transactions (default: 1)
 \fB\-txconfirmtarget=\fR<n>
 .IP
 If paytxfee is not set, include enough fee so transactions begin
-confirmation on average within n blocks (default: 6)
+confirmation on average within n blocks (default: 144)
 .HP
 \fB\-wallet=\fR<path>
 .IP
@@ -507,16 +542,20 @@ Make the wallet broadcast transactions (default: 1)
 Specify directory to hold wallets (default: <datadir>/wallets if it
 exists, otherwise <datadir>)
 .HP
+\fB\-walletimplicitsegwit\fR
+.IP
+Support segwit when restoring wallet backups and importing keys
+(default: 0)
+.HP
 \fB\-walletnotify=\fR<cmd>
 .IP
 Execute command when a wallet transaction changes. %s in cmd is replaced
 by TxID, %w is replaced by wallet name, %b is replaced by the
 hash of the block including the transaction (set to 'unconfirmed'
 if the transaction is not included) and %h is replaced by the
-block height (\fB\-1\fR if not included). %w is not currently
-implemented on windows. On systems where %w is supported, it
-should NOT be quoted because this would break shell escaping used
-to invoke the command.
+block height (\fB\-1\fR if not included). %w should NOT be quoted
+because this would break shell escaping used to invoke the
+command.
 .HP
 \fB\-walletrbf\fR
 .IP
@@ -541,6 +580,15 @@ Enable publish hash transaction in <address>
 Set publish hash transaction outbound message high water mark (default:
 1000)
 .HP
+\fB\-zmqpubhashwallettx=\fR<address>
+.IP
+Enable publish hash wallet transaction in <address>
+.HP
+\fB\-zmqpubhashwallettxhwm=\fR<n>
+.IP
+Set publish hash wallet transaction outbound message high water mark
+(default: 1000)
+.HP
 \fB\-zmqpubrawblock=\fR<address>
 .IP
 Enable publish raw block in <address>
@@ -558,6 +606,15 @@ Enable publish raw transaction in <address>
 Set publish raw transaction outbound message high water mark (default:
 1000)
 .HP
+\fB\-zmqpubrawwallettx=\fR<address>
+.IP
+Enable publish raw wallet transaction in <address>
+.HP
+\fB\-zmqpubrawwallettxhwm=\fR<n>
+.IP
+Set publish raw wallet transaction outbound message high water mark
+(default: 1000)
+.HP
 \fB\-zmqpubsequence=\fR<address>
 .IP
 Enable publish hash block and tx sequence in <address>
@@ -638,6 +695,12 @@ signet, regtest
 Use the signet chain. Equivalent to \fB\-chain\fR=\fI\,signet\/\fR. Note that the network
 is defined by the \fB\-signetchallenge\fR parameter
 .HP
+\fB\-signetblocktime\fR
+.IP
+Difficulty adjustment will target a block time of the given amount in
+seconds (only for custom signet networks, must have
+\fB\-signetchallenge\fR set; defaults to 10 minutes)
+.HP
 \fB\-signetchallenge\fR
 .IP
 Blocks must satisfy the given script to be considered valid (only for
@@ -657,24 +720,47 @@ Use the test chain. Equivalent to \fB\-chain\fR=\fI\,test\/\fR.
 .PP
 Node relay options:
 .HP
+\fB\-acceptnonstdtxn\fR
+.IP
+Relay and mine "non\-standard" transactions (default: 0 or testnet: 1)
+.HP
 \fB\-bytespersigop\fR
 .IP
 Equivalent bytes per sigop in transactions for relay and mining
 (default: 20)
 .HP
+\fB\-bytespersigopstrict\fR
+.IP
+Minimum bytes per sigop in transactions we relay and mine (default: 20)
+.HP
 \fB\-datacarrier\fR
 .IP
 Relay and mine data carrier transactions (default: 1)
 .HP
+\fB\-datacarriercost\fR
+.IP
+Treat extra data in transactions as at least N vbytes per actual byte
+(default: 1)
+.HP
 \fB\-datacarriersize\fR
 .IP
 Maximum size of data in data carrier transactions we relay and mine
-(default: 83)
+(default: 42)
+.HP
+\fB\-maxscriptsize\fR
+.IP
+Maximum size of scripts we relay and mine (default: 1650)
 .HP
 \fB\-mempoolfullrbf\fR
 .IP
 Accept transaction replace\-by\-fee without requiring replaceability
-signaling (default: 0)
+signaling (default: 1)
+.HP
+\fB\-mempoolreplacement\fR
+.IP
+Set to 0 to disable RBF entirely, "fee,optin" to honour RBF opt\-out
+signal, or "fee,\-optin" to always RBF aka full RBF (default:
+fee,optin)
 .HP
 \fB\-minrelaytxfee=\fR<amt>
 .IP
@@ -683,30 +769,44 @@ relaying, mining and transaction creation (default: 0.00001)
 .HP
 \fB\-permitbaremultisig\fR
 .IP
-Relay non\-P2SH multisig (default: 1)
+Relay non\-P2SH multisig (default: 0)
+.HP
+\fB\-spkreuse\fR
+.IP
+Accept transactions reusing addresses or other pubkey scripts (default:
+allow)
 .HP
 \fB\-whitelistforcerelay\fR
 .IP
-Add 'forcerelay' permission to whitelisted inbound peers with default
+Add 'forcerelay' permission to whitelisted peers with default
 permissions. This will relay transactions even if the
 transactions were already in the mempool. (default: 0)
 .HP
 \fB\-whitelistrelay\fR
 .IP
-Add 'relay' permission to whitelisted inbound peers with default
-permissions. This will accept relayed transactions even when not
-relaying transactions (default: 1)
+Add 'relay' permission to whitelisted peers with default permissions.
+This will accept relayed transactions even when not relaying
+transactions (default: 1)
 .PP
 Block creation options:
 .HP
+\fB\-blockmaxsize=\fR<n>
+.IP
+Set maximum block size in bytes (default: 300000)
+.HP
 \fB\-blockmaxweight=\fR<n>
 .IP
-Set maximum BIP141 block weight (default: 3996000)
+Set maximum BIP141 block weight (default: 1500000)
 .HP
 \fB\-blockmintxfee=\fR<amt>
 .IP
 Set lowest fee rate (in BTC/kvB) for transactions to be included in
 block creation. (default: 0.00001)
+.HP
+\fB\-blockprioritysize=\fR<n>
+.IP
+Set maximum size of high\-priority/low\-fee transactions in bytes
+(default: 100000)
 .PP
 RPC server options:
 .HP
@@ -730,6 +830,11 @@ then connects normally using the
 rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This
 option can be specified multiple times
 .HP
+\fB\-rpcauthfile=\fR<userpw>
+.IP
+A file with a single lines with same format as rpcauth. This option can
+be specified multiple times
+.HP
 \fB\-rpcbind=\fR<addr>[:port]
 .IP
 Bind to given address to listen for JSON\-RPC connections. Do not expose
@@ -744,6 +849,11 @@ IPv6. This option can be specified multiple times (default:
 Location of the auth cookie. Relative paths will be prefixed by a
 net\-specific datadir location. (default: data dir)
 .HP
+\fB\-rpccookieperms=\fR<octal>
+.IP
+Set the permissions on the RPC auth cookie file to the specified octal
+value (default: 0600)
+.HP
 \fB\-rpcpassword=\fR<pw>
 .IP
 Password for JSON\-RPC connections
@@ -793,6 +903,10 @@ UI Options:
 .IP
 Choose data directory on startup (default: 0)
 .HP
+\fB\-guisettingsdir=\fR<path>
+.IP
+Choose a custom data directory especially for the Qt Settings
+.HP
 \fB\-lang=\fR<lang>
 .IP
 Set language, for example "de_DE" (default: system locale)
@@ -808,12 +922,22 @@ Reset all settings changed in the GUI
 \fB\-splash\fR
 .IP
 Show splash screen on startup (default: 1)
+.PP
+Statistic options:
+.HP
+\fB\-statsenable\fR
+.IP
+Enable statistics (default: 0)
+.HP
+\fB\-statsmaxmemorytarget=\fR<n>
+.IP
+Set the memory limit target for statistics in bytes (default: 10485760)
 .SH COPYRIGHT
 Copyright (C) 2009-2023 The Bitcoin Core developers
 
-Please contribute if you find Bitcoin Core useful. Visit
-<https://bitcoincore.org/> for further information about the software.
-The source code is available from <https://github.com/bitcoin/bitcoin>.
+Please contribute if you find Bitcoin Knots useful. Visit
+<https://bitcoinknots.org/> for further information about the software.
+The source code is available from <https://github.com/bitcoinknots/bitcoin>.
 
 This is experimental software.
 Distributed under the MIT software license, see the accompanying file COPYING
diff --git a/doc/man/bitcoin-tx.1 b/doc/man/bitcoin-tx.1
index 75fe2fb1a1..e02da4fec8 100644
--- a/doc/man/bitcoin-tx.1
+++ b/doc/man/bitcoin-tx.1
@@ -1,5 +1,5 @@
 .\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
-.TH BITCOIN-TX "1" "October 2023" "bitcoin-tx v25.1.0" "User Commands"
+.TH BITCOIN-TX "1" "November 2023" "bitcoin-tx v25.1.0" "User Commands"
 .SH NAME
 bitcoin-tx \- manual page for bitcoin-tx v25.1.0
 .SH SYNOPSIS
@@ -9,7 +9,7 @@ bitcoin-tx \- manual page for bitcoin-tx v25.1.0
 .B bitcoin-tx
 [\fI\,options\/\fR] \fI\,-create \/\fR[\fI\,commands\/\fR]   \fI\,Create hex-encoded bitcoin transaction\/\fR
 .SH DESCRIPTION
-Bitcoin Core bitcoin\-tx utility version v25.1.0
+Bitcoin Knots bitcoin\-tx utility version v25.1.0
 .SH OPTIONS
 .HP
 \-?
@@ -46,6 +46,12 @@ signet, regtest
 Use the signet chain. Equivalent to \fB\-chain\fR=\fI\,signet\/\fR. Note that the network
 is defined by the \fB\-signetchallenge\fR parameter
 .HP
+\fB\-signetblocktime\fR
+.IP
+Difficulty adjustment will target a block time of the given amount in
+seconds (only for custom signet networks, must have
+\fB\-signetchallenge\fR set; defaults to 10 minutes)
+.HP
 \fB\-signetchallenge\fR
 .IP
 Blocks must satisfy the given script to be considered valid (only for
@@ -136,9 +142,9 @@ Set register NAME to given JSON\-STRING
 .SH COPYRIGHT
 Copyright (C) 2009-2023 The Bitcoin Core developers
 
-Please contribute if you find Bitcoin Core useful. Visit
-<https://bitcoincore.org/> for further information about the software.
-The source code is available from <https://github.com/bitcoin/bitcoin>.
+Please contribute if you find Bitcoin Knots useful. Visit
+<https://bitcoinknots.org/> for further information about the software.
+The source code is available from <https://github.com/bitcoinknots/bitcoin>.
 
 This is experimental software.
 Distributed under the MIT software license, see the accompanying file COPYING
diff --git a/doc/man/bitcoin-util.1 b/doc/man/bitcoin-util.1
index 0e04024173..35d1d4dfa3 100644
--- a/doc/man/bitcoin-util.1
+++ b/doc/man/bitcoin-util.1
@@ -1,12 +1,12 @@
 .\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
-.TH BITCOIN-UTIL "1" "October 2023" "bitcoin-util v25.1.0" "User Commands"
+.TH BITCOIN-UTIL "1" "November 2023" "bitcoin-util v25.1.0" "User Commands"
 .SH NAME
 bitcoin-util \- manual page for bitcoin-util v25.1.0
 .SH SYNOPSIS
 .B bitcoin-util
 [\fI\,options\/\fR] [\fI\,commands\/\fR]  \fI\,Do stuff\/\fR
 .SH DESCRIPTION
-Bitcoin Core bitcoin\-util utility version v25.1.0
+Bitcoin Knots bitcoin\-util utility version v25.1.0
 .SH OPTIONS
 .HP
 \-?
@@ -31,6 +31,12 @@ signet, regtest
 Use the signet chain. Equivalent to \fB\-chain\fR=\fI\,signet\/\fR. Note that the network
 is defined by the \fB\-signetchallenge\fR parameter
 .HP
+\fB\-signetblocktime\fR
+.IP
+Difficulty adjustment will target a block time of the given amount in
+seconds (only for custom signet networks, must have
+\fB\-signetchallenge\fR set; defaults to 10 minutes)
+.HP
 \fB\-signetchallenge\fR
 .IP
 Blocks must satisfy the given script to be considered valid (only for
@@ -56,9 +62,9 @@ Perform proof of work on hex header string
 .SH COPYRIGHT
 Copyright (C) 2009-2023 The Bitcoin Core developers
 
-Please contribute if you find Bitcoin Core useful. Visit
-<https://bitcoincore.org/> for further information about the software.
-The source code is available from <https://github.com/bitcoin/bitcoin>.
+Please contribute if you find Bitcoin Knots useful. Visit
+<https://bitcoinknots.org/> for further information about the software.
+The source code is available from <https://github.com/bitcoinknots/bitcoin>.
 
 This is experimental software.
 Distributed under the MIT software license, see the accompanying file COPYING
diff --git a/doc/man/bitcoin-wallet.1 b/doc/man/bitcoin-wallet.1
index ef063c90b0..16f1971d52 100644
--- a/doc/man/bitcoin-wallet.1
+++ b/doc/man/bitcoin-wallet.1
@@ -1,11 +1,11 @@
 .\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
-.TH BITCOIN-WALLET "1" "October 2023" "bitcoin-wallet v25.1.0" "User Commands"
+.TH BITCOIN-WALLET "1" "November 2023" "bitcoin-wallet v25.1.0" "User Commands"
 .SH NAME
 bitcoin-wallet \- manual page for bitcoin-wallet v25.1.0
 .SH DESCRIPTION
-Bitcoin Core bitcoin\-wallet version v25.1.0
+Bitcoin Knots bitcoin\-wallet version v25.1.0
 .PP
-bitcoin\-wallet is an offline tool for creating and interacting with Bitcoin Core wallet files.
+bitcoin\-wallet is an offline tool for creating and interacting with Bitcoin Knots wallet files.
 By default bitcoin\-wallet will act on wallets in the default mainnet wallet directory in the datadir.
 To change the target wallet, use the \fB\-datadir\fR, \fB\-wallet\fR and \fB\-regtest\fR/\-signet/\-testnet arguments.
 .SS "Usage:"
@@ -70,6 +70,12 @@ signet, regtest
 Use the signet chain. Equivalent to \fB\-chain\fR=\fI\,signet\/\fR. Note that the network
 is defined by the \fB\-signetchallenge\fR parameter
 .HP
+\fB\-signetblocktime\fR
+.IP
+Difficulty adjustment will target a block time of the given amount in
+seconds (only for custom signet networks, must have
+\fB\-signetchallenge\fR set; defaults to 10 minutes)
+.HP
 \fB\-signetchallenge\fR
 .IP
 Blocks must satisfy the given script to be considered valid (only for
@@ -101,6 +107,10 @@ dump
 .IP
 Print out all of the wallet key\-value records
 .IP
+importfromcoldcard
+.IP
+Create new wallet file and import descriptors from Coldcard wallet
+.IP
 info
 .IP
 Get wallet info
@@ -112,9 +122,9 @@ Attempt to recover private keys from a corrupt wallet. Warning:
 .SH COPYRIGHT
 Copyright (C) 2009-2023 The Bitcoin Core developers
 
-Please contribute if you find Bitcoin Core useful. Visit
-<https://bitcoincore.org/> for further information about the software.
-The source code is available from <https://github.com/bitcoin/bitcoin>.
+Please contribute if you find Bitcoin Knots useful. Visit
+<https://bitcoinknots.org/> for further information about the software.
+The source code is available from <https://github.com/bitcoinknots/bitcoin>.
 
 This is experimental software.
 Distributed under the MIT software license, see the accompanying file COPYING
diff --git a/doc/man/bitcoind.1 b/doc/man/bitcoind.1
index d833621ad9..d03ec27e54 100644
--- a/doc/man/bitcoind.1
+++ b/doc/man/bitcoind.1
@@ -1,12 +1,12 @@
 .\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
-.TH BITCOIND "1" "October 2023" "bitcoind v25.1.0" "User Commands"
+.TH BITCOIND "1" "November 2023" "bitcoind v25.1.0" "User Commands"
 .SH NAME
 bitcoind \- manual page for bitcoind v25.1.0
 .SH SYNOPSIS
 .B bitcoind
-[\fI\,options\/\fR]                     \fI\,Start Bitcoin Core\/\fR
+[\fI\,options\/\fR]                     \fI\,Start Bitcoin Knots\/\fR
 .SH DESCRIPTION
-Bitcoin Core version v25.1.0
+Bitcoin Knots version v25.1.0
 .SH OPTIONS
 .HP
 \-?
@@ -18,12 +18,17 @@ Print this help message and exit
 Execute command when an alert is raised (%s in cmd is replaced by
 message)
 .HP
+\fB\-allowignoredconf\fR
+.IP
+For backwards compatibility, treat an unused bitcoin.conf file in the
+datadir as a warning, not an error.
+.HP
 \fB\-assumevalid=\fR<hex>
 .IP
 If this block is in the chain assume that it and its ancestors are valid
 and potentially skip their script verification (0 to verify all,
 default:
-000000000000000000035c3f0d31e71a5ee24c5aaf3354689f65bd7b07dee632,
+000000000000000000003d97a46dbbb4cca4b3e23c39c446df75cfe726163bb5,
 testnet:
 0000000000000021bc50a89cde4870d4a81ffe0153b3c8de77b435a2fd3f6761,
 signet:
@@ -32,8 +37,8 @@ signet:
 \fB\-blockfilterindex=\fR<type>
 .IP
 Maintain an index of compact filters by block (default: 0, values:
-basic). If <type> is not supplied or if <type> = 1, indexes for
-all known types are enabled.
+basic, v0). If <type> is not supplied or if <type> = 1, certain
+indexes are enabled (currently just basic).
 .HP
 \fB\-blocknotify=\fR<cmd>
 .IP
@@ -53,9 +58,9 @@ Specify directory to hold blocks subdirectory for *.dat files (default:
 \fB\-blocksonly\fR
 .IP
 Whether to reject transactions from network peers. Automatic broadcast
-and rebroadcast of any transactions from inbound peers is
-disabled, unless the peer has the 'forcerelay' permission. RPC
-transactions are not affected. (default: 0)
+and rebroadcast of any transactions from any peer is disabled,
+unless it has the 'forcerelay' permission. RPC transactions are
+not affected. (default: 0)
 .HP
 \fB\-coinstatsindex\fR
 .IP
@@ -67,6 +72,16 @@ Specify path to read\-only configuration file. Relative paths will be
 prefixed by datadir location (only useable from command line, not
 configuration file) (default: bitcoin.conf)
 .HP
+\fB\-confrw=\fR<file>
+.IP
+Specify read/write configuration file. Relative paths will be prefixed
+by the network\-specific datadir location (default:
+bitcoin_rw.conf)
+.HP
+\fB\-corepolicy\fR
+.IP
+Use Bitcoin Core policy defaults (default: false)
+.HP
 \fB\-daemon\fR
 .IP
 Run in the background as a daemon and accept commands (default: 0)
@@ -82,7 +97,7 @@ Specify data directory
 .HP
 \fB\-dbcache=\fR<n>
 .IP
-Maximum database cache size <n> MiB (4 to 16384, default: 450). In
+Maximum database cache size <n> MiB (4 to 1048576, default: 450). In
 addition, unused mempool memory is shared for this cache (see
 \fB\-maxmempool\fR).
 .HP
@@ -101,6 +116,11 @@ Specify additional configuration file, relative to the \fB\-datadir\fR path
 .IP
 Imports blocks from external file on startup
 .HP
+\fB\-lowmem=\fR<n>
+.IP
+If system available memory falls below <n> MiB, flush caches (0 to
+disable, default: 10)
+.HP
 \fB\-maxmempool=\fR<n>
 .IP
 Keep the transaction memory pool below <n> megabytes (default: 300)
@@ -116,7 +136,7 @@ Do not keep transactions in the mempool longer than <n> hours (default:
 .HP
 \fB\-par=\fR<n>
 .IP
-Set the number of script verification threads (\fB\-10\fR to 15, 0 = auto, <0 =
+Set the number of script verification threads (0 = auto, up to 15, <0 =
 leave that many cores free, default: 0)
 .HP
 \fB\-persistmempool\fR
@@ -143,7 +163,9 @@ target size in MiB)
 \fB\-reindex\fR
 .IP
 Rebuild chain state and block index from the blk*.dat files on disk.
-This will also rebuild active optional indexes.
+This will also rebuild active optional indexes. Setting this to
+auto automatically reindexes the block database if it is
+corrupted.
 .HP
 \fB\-reindex\-chainstate\fR
 .IP
@@ -338,7 +360,7 @@ Serve compact block filters to peers per BIP 157 (default: 0)
 \fB\-peerbloomfilters\fR
 .IP
 Support filtering of blocks and transaction with bloom filters (default:
-0)
+1)
 .HP
 \fB\-port=\fR<port>
 .IP
@@ -371,40 +393,53 @@ to connect is unsuccessful after this amount of time, drop it
 .HP
 \fB\-torcontrol=\fR<ip>:<port>
 .IP
-Tor control port to use if onion listening enabled (default:
-127.0.0.1:9051)
+Tor control host and port to use if onion listening enabled (default:
+127.0.0.1:9051). If no port is specified, the default port of
+9051 will be used.
+.HP
+\fB\-torexecute=\fR<command>
+.IP
+Tor command to use if not already running (default: tor)
 .HP
 \fB\-torpassword=\fR<pass>
 .IP
 Tor control port password (default: empty)
 .HP
+\fB\-uaappend=\fR<cmt>
+.IP
+Append literal to the user agent string (should only be used for
+software embedding)
+.HP
 \fB\-upnp\fR
 .IP
-Use UPnP to map the listening port (default: 1 when listening and no
-\fB\-proxy\fR)
+Use UPnP to map the listening port (default: 0)
 .HP
 \fB\-whitebind=\fR<[permissions@]addr>
 .IP
 Bind to the given address and add permission flags to the peers
 connecting to it. Use [host]:port notation for IPv6. Allowed
 permissions: bloomfilter (allow requesting BIP37 filtered blocks
-and transactions), noban (do not ban for misbehavior; implies
+and transactions), blockfilters (serve compact block filters to
+peers per BIP157), noban (do not ban for misbehavior; implies
 download), forcerelay (relay transactions that are already in the
 mempool; implies relay), relay (relay even in \fB\-blocksonly\fR mode,
 and unlimited transaction announcements), mempool (allow
 requesting BIP35 mempool contents), download (allow getheaders
 during IBD, no disconnect after maxuploadtarget limit), addr
 (responses to GETADDR avoid hitting the cache and contain random
-records with the most up\-to\-date info). Specify multiple
+records with the most up\-to\-date info), forceinbound (when
+connections are full, attempt to evict a random unprotected
+inbound peer to open a slot; implies noban). Specify multiple
 permissions separated by commas (default:
 download,noban,mempool,relay). Can be specified multiple times.
 .HP
 \fB\-whitelist=\fR<[permissions@]IP address or network>
 .IP
-Add permission flags to the peers connecting from the given IP address
-(e.g. 1.2.3.4) or CIDR\-notated network (e.g. 1.2.3.0/24). Uses
-the same permissions as \fB\-whitebind\fR. Can be specified multiple
-times.
+Add permission flags to the peers using the given IP address (e.g.
+1.2.3.4) or CIDR\-notated network (e.g. 1.2.3.0/24). Uses the same
+permissions as \fB\-whitebind\fR. Additional flags "in" and "out"
+control whether permissions apply to incoming connections and/or
+outgoing (default: both). Can be specified multiple times.
 .PP
 Wallet options:
 .HP
@@ -486,7 +521,7 @@ Spend unconfirmed change when sending transactions (default: 1)
 \fB\-txconfirmtarget=\fR<n>
 .IP
 If paytxfee is not set, include enough fee so transactions begin
-confirmation on average within n blocks (default: 6)
+confirmation on average within n blocks (default: 144)
 .HP
 \fB\-wallet=\fR<path>
 .IP
@@ -507,16 +542,20 @@ Make the wallet broadcast transactions (default: 1)
 Specify directory to hold wallets (default: <datadir>/wallets if it
 exists, otherwise <datadir>)
 .HP
+\fB\-walletimplicitsegwit\fR
+.IP
+Support segwit when restoring wallet backups and importing keys
+(default: 0)
+.HP
 \fB\-walletnotify=\fR<cmd>
 .IP
 Execute command when a wallet transaction changes. %s in cmd is replaced
 by TxID, %w is replaced by wallet name, %b is replaced by the
 hash of the block including the transaction (set to 'unconfirmed'
 if the transaction is not included) and %h is replaced by the
-block height (\fB\-1\fR if not included). %w is not currently
-implemented on windows. On systems where %w is supported, it
-should NOT be quoted because this would break shell escaping used
-to invoke the command.
+block height (\fB\-1\fR if not included). %w should NOT be quoted
+because this would break shell escaping used to invoke the
+command.
 .HP
 \fB\-walletrbf\fR
 .IP
@@ -541,6 +580,15 @@ Enable publish hash transaction in <address>
 Set publish hash transaction outbound message high water mark (default:
 1000)
 .HP
+\fB\-zmqpubhashwallettx=\fR<address>
+.IP
+Enable publish hash wallet transaction in <address>
+.HP
+\fB\-zmqpubhashwallettxhwm=\fR<n>
+.IP
+Set publish hash wallet transaction outbound message high water mark
+(default: 1000)
+.HP
 \fB\-zmqpubrawblock=\fR<address>
 .IP
 Enable publish raw block in <address>
@@ -558,6 +606,15 @@ Enable publish raw transaction in <address>
 Set publish raw transaction outbound message high water mark (default:
 1000)
 .HP
+\fB\-zmqpubrawwallettx=\fR<address>
+.IP
+Enable publish raw wallet transaction in <address>
+.HP
+\fB\-zmqpubrawwallettxhwm=\fR<n>
+.IP
+Set publish raw wallet transaction outbound message high water mark
+(default: 1000)
+.HP
 \fB\-zmqpubsequence=\fR<address>
 .IP
 Enable publish hash block and tx sequence in <address>
@@ -638,6 +695,12 @@ signet, regtest
 Use the signet chain. Equivalent to \fB\-chain\fR=\fI\,signet\/\fR. Note that the network
 is defined by the \fB\-signetchallenge\fR parameter
 .HP
+\fB\-signetblocktime\fR
+.IP
+Difficulty adjustment will target a block time of the given amount in
+seconds (only for custom signet networks, must have
+\fB\-signetchallenge\fR set; defaults to 10 minutes)
+.HP
 \fB\-signetchallenge\fR
 .IP
 Blocks must satisfy the given script to be considered valid (only for
@@ -657,24 +720,47 @@ Use the test chain. Equivalent to \fB\-chain\fR=\fI\,test\/\fR.
 .PP
 Node relay options:
 .HP
+\fB\-acceptnonstdtxn\fR
+.IP
+Relay and mine "non\-standard" transactions (default: 0 or testnet: 1)
+.HP
 \fB\-bytespersigop\fR
 .IP
 Equivalent bytes per sigop in transactions for relay and mining
 (default: 20)
 .HP
+\fB\-bytespersigopstrict\fR
+.IP
+Minimum bytes per sigop in transactions we relay and mine (default: 20)
+.HP
 \fB\-datacarrier\fR
 .IP
 Relay and mine data carrier transactions (default: 1)
 .HP
+\fB\-datacarriercost\fR
+.IP
+Treat extra data in transactions as at least N vbytes per actual byte
+(default: 1)
+.HP
 \fB\-datacarriersize\fR
 .IP
 Maximum size of data in data carrier transactions we relay and mine
-(default: 83)
+(default: 42)
+.HP
+\fB\-maxscriptsize\fR
+.IP
+Maximum size of scripts we relay and mine (default: 1650)
 .HP
 \fB\-mempoolfullrbf\fR
 .IP
 Accept transaction replace\-by\-fee without requiring replaceability
-signaling (default: 0)
+signaling (default: 1)
+.HP
+\fB\-mempoolreplacement\fR
+.IP
+Set to 0 to disable RBF entirely, "fee,optin" to honour RBF opt\-out
+signal, or "fee,\-optin" to always RBF aka full RBF (default:
+fee,optin)
 .HP
 \fB\-minrelaytxfee=\fR<amt>
 .IP
@@ -683,30 +769,44 @@ relaying, mining and transaction creation (default: 0.00001)
 .HP
 \fB\-permitbaremultisig\fR
 .IP
-Relay non\-P2SH multisig (default: 1)
+Relay non\-P2SH multisig (default: 0)
+.HP
+\fB\-spkreuse\fR
+.IP
+Accept transactions reusing addresses or other pubkey scripts (default:
+allow)
 .HP
 \fB\-whitelistforcerelay\fR
 .IP
-Add 'forcerelay' permission to whitelisted inbound peers with default
+Add 'forcerelay' permission to whitelisted peers with default
 permissions. This will relay transactions even if the
 transactions were already in the mempool. (default: 0)
 .HP
 \fB\-whitelistrelay\fR
 .IP
-Add 'relay' permission to whitelisted inbound peers with default
-permissions. This will accept relayed transactions even when not
-relaying transactions (default: 1)
+Add 'relay' permission to whitelisted peers with default permissions.
+This will accept relayed transactions even when not relaying
+transactions (default: 1)
 .PP
 Block creation options:
 .HP
+\fB\-blockmaxsize=\fR<n>
+.IP
+Set maximum block size in bytes (default: 300000)
+.HP
 \fB\-blockmaxweight=\fR<n>
 .IP
-Set maximum BIP141 block weight (default: 3996000)
+Set maximum BIP141 block weight (default: 1500000)
 .HP
 \fB\-blockmintxfee=\fR<amt>
 .IP
 Set lowest fee rate (in BTC/kvB) for transactions to be included in
 block creation. (default: 0.00001)
+.HP
+\fB\-blockprioritysize=\fR<n>
+.IP
+Set maximum size of high\-priority/low\-fee transactions in bytes
+(default: 100000)
 .PP
 RPC server options:
 .HP
@@ -730,6 +830,11 @@ then connects normally using the
 rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This
 option can be specified multiple times
 .HP
+\fB\-rpcauthfile=\fR<userpw>
+.IP
+A file with a single lines with same format as rpcauth. This option can
+be specified multiple times
+.HP
 \fB\-rpcbind=\fR<addr>[:port]
 .IP
 Bind to given address to listen for JSON\-RPC connections. Do not expose
@@ -744,6 +849,11 @@ IPv6. This option can be specified multiple times (default:
 Location of the auth cookie. Relative paths will be prefixed by a
 net\-specific datadir location. (default: data dir)
 .HP
+\fB\-rpccookieperms=\fR<octal>
+.IP
+Set the permissions on the RPC auth cookie file to the specified octal
+value (default: 0600)
+.HP
 \fB\-rpcpassword=\fR<pw>
 .IP
 Password for JSON\-RPC connections
@@ -786,12 +896,22 @@ subject to empty whitelists.
 \fB\-server\fR
 .IP
 Accept command line and JSON\-RPC commands
+.PP
+Statistic options:
+.HP
+\fB\-statsenable\fR
+.IP
+Enable statistics (default: 0)
+.HP
+\fB\-statsmaxmemorytarget=\fR<n>
+.IP
+Set the memory limit target for statistics in bytes (default: 10485760)
 .SH COPYRIGHT
 Copyright (C) 2009-2023 The Bitcoin Core developers
 
-Please contribute if you find Bitcoin Core useful. Visit
-<https://bitcoincore.org/> for further information about the software.
-The source code is available from <https://github.com/bitcoin/bitcoin>.
+Please contribute if you find Bitcoin Knots useful. Visit
+<https://bitcoinknots.org/> for further information about the software.
+The source code is available from <https://github.com/bitcoinknots/bitcoin>.
 
 This is experimental software.
 Distributed under the MIT software license, see the accompanying file COPYING
diff --git a/share/examples/bitcoin.conf b/share/examples/bitcoin.conf
index ea0174c0f5..fdc1aadb19 100644
--- a/share/examples/bitcoin.conf
+++ b/share/examples/bitcoin.conf
@@ -16,10 +16,14 @@
 # message)
 #alertnotify=<cmd>
 
+# For backwards compatibility, treat an unused bitcoin.conf file in the
+# datadir as a warning, not an error.
+#allowignoredconf=1
+
 # If this block is in the chain assume that it and its ancestors are valid
 # and potentially skip their script verification (0 to verify all,
 # default:
-# 000000000000000000035c3f0d31e71a5ee24c5aaf3354689f65bd7b07dee632,
+# 000000000000000000003d97a46dbbb4cca4b3e23c39c446df75cfe726163bb5,
 # testnet:
 # 0000000000000021bc50a89cde4870d4a81ffe0153b3c8de77b435a2fd3f6761,
 # signet:
@@ -27,8 +31,8 @@
 #assumevalid=<hex>
 
 # Maintain an index of compact filters by block (default: 0, values:
-# basic). If <type> is not supplied or if <type> = 1, indexes for
-# all known types are enabled.
+# basic, v0). If <type> is not supplied or if <type> = 1, certain
+# indexes are enabled (currently just basic).
 #blockfilterindex=<type>
 
 # Execute command when the best block changes (%s in cmd is replaced by
@@ -44,9 +48,9 @@
 #blocksdir=<dir>
 
 # Whether to reject transactions from network peers. Automatic broadcast
-# and rebroadcast of any transactions from inbound peers is
-# disabled, unless the peer has the 'forcerelay' permission. RPC
-# transactions are not affected. (default: 0)
+# and rebroadcast of any transactions from any peer is disabled,
+# unless it has the 'forcerelay' permission. RPC transactions are
+# not affected. (default: 0)
 #blocksonly=1
 
 # Maintain coinstats index used by the gettxoutsetinfo RPC (default: 0)
@@ -57,6 +61,14 @@
 # configuration file) (default: bitcoin.conf)
 #conf=<file>
 
+# Specify read/write configuration file. Relative paths will be prefixed
+# by the network-specific datadir location (default:
+# bitcoin_rw.conf)
+#confrw=<file>
+
+# Use Bitcoin Core policy defaults (default: false)
+#corepolicy=1
+
 # Run in the background as a daemon and accept commands (default: 0)
 #daemon=1
 
@@ -67,7 +79,7 @@
 # Specify data directory
 #datadir=<dir>
 
-# Maximum database cache size <n> MiB (4 to 16384, default: 450). In
+# Maximum database cache size <n> MiB (4 to 1048576, default: 450). In
 # addition, unused mempool memory is shared for this cache (see
 # -maxmempool).
 #dbcache=<n>
@@ -84,6 +96,10 @@
 # Imports blocks from external file on startup
 #loadblock=<file>
 
+# If system available memory falls below <n> MiB, flush caches (0 to
+# disable, default: 10)
+#lowmem=<n>
+
 # Keep the transaction memory pool below <n> megabytes (default: 300)
 #maxmempool=<n>
 
@@ -94,7 +110,7 @@
 # 336)
 #mempoolexpiry=<n>
 
-# Set the number of script verification threads (-10 to 15, 0 = auto, <0 =
+# Set the number of script verification threads (0 = auto, up to 15, <0 =
 # leave that many cores free, default: 0)
 #par=<n>
 
@@ -117,7 +133,9 @@
 #prune=<n>
 
 # Rebuild chain state and block index from the blk*.dat files on disk.
-# This will also rebuild active optional indexes.
+# This will also rebuild active optional indexes. Setting this to
+# auto automatically reindexes the block database if it is
+# corrupted.
 #reindex=1
 
 # Rebuild chain state from the currently indexed blocks. When in pruning
@@ -280,7 +298,7 @@
 #peerblockfilters=1
 
 # Support filtering of blocks and transaction with bloom filters (default:
-# 0)
+# 1)
 #peerbloomfilters=1
 
 # Listen for connections on <port>. Nodes not using the default ports
@@ -307,36 +325,47 @@
 # (minimum: 1, default: 5000)
 #timeout=<n>
 
-# Tor control port to use if onion listening enabled (default:
-# 127.0.0.1:9051)
+# Tor control host and port to use if onion listening enabled (default:
+# 127.0.0.1:9051). If no port is specified, the default port of
+# 9051 will be used.
 #torcontrol=<ip>:<port>
 
+# Tor command to use if not already running (default: tor)
+#torexecute=<command>
+
 # Tor control port password (default: empty)
 #torpassword=<pass>
 
-# Use UPnP to map the listening port (default: 1 when listening and no
-# -proxy)
+# Append literal to the user agent string (should only be used for
+# software embedding)
+#uaappend=<cmt>
+
+# Use UPnP to map the listening port (default: 0)
 #upnp=1
 
 # Bind to the given address and add permission flags to the peers
 # connecting to it. Use [host]:port notation for IPv6. Allowed
 # permissions: bloomfilter (allow requesting BIP37 filtered blocks
-# and transactions), noban (do not ban for misbehavior; implies
+# and transactions), blockfilters (serve compact block filters to
+# peers per BIP157), noban (do not ban for misbehavior; implies
 # download), forcerelay (relay transactions that are already in the
 # mempool; implies relay), relay (relay even in -blocksonly mode,
 # and unlimited transaction announcements), mempool (allow
 # requesting BIP35 mempool contents), download (allow getheaders
 # during IBD, no disconnect after maxuploadtarget limit), addr
 # (responses to GETADDR avoid hitting the cache and contain random
-# records with the most up-to-date info). Specify multiple
+# records with the most up-to-date info), forceinbound (when
+# connections are full, attempt to evict a random unprotected
+# inbound peer to open a slot; implies noban). Specify multiple
 # permissions separated by commas (default:
 # download,noban,mempool,relay). Can be specified multiple times.
 #whitebind=<[permissions@]addr>
 
-# Add permission flags to the peers connecting from the given IP address
-# (e.g. 1.2.3.4) or CIDR-notated network (e.g. 1.2.3.0/24). Uses
-# the same permissions as -whitebind. Can be specified multiple
-# times.
+# Add permission flags to the peers using the given IP address (e.g.
+# 1.2.3.4) or CIDR-notated network (e.g. 1.2.3.0/24). Uses the same
+# permissions as -whitebind. Additional flags "in" and "out"
+# control whether permissions apply to incoming connections and/or
+# outgoing (default: both). Can be specified multiple times.
 #whitelist=<[permissions@]IP address or network>
 
 
@@ -406,7 +435,7 @@
 #spendzeroconfchange=1
 
 # If paytxfee is not set, include enough fee so transactions begin
-# confirmation on average within n blocks (default: 6)
+# confirmation on average within n blocks (default: 144)
 #txconfirmtarget=<n>
 
 # Specify wallet path to load at startup. Can be used multiple times to
@@ -425,14 +454,17 @@
 # exists, otherwise <datadir>)
 #walletdir=<dir>
 
+# Support segwit when restoring wallet backups and importing keys
+# (default: 0)
+#walletimplicitsegwit=1
+
 # Execute command when a wallet transaction changes. %s in cmd is replaced
 # by TxID, %w is replaced by wallet name, %b is replaced by the
 # hash of the block including the transaction (set to 'unconfirmed'
 # if the transaction is not included) and %h is replaced by the
-# block height (-1 if not included). %w is not currently
-# implemented on windows. On systems where %w is supported, it
-# should NOT be quoted because this would break shell escaping used
-# to invoke the command.
+# block height (-1 if not included). %w should NOT be quoted
+# because this would break shell escaping used to invoke the
+# command.
 #walletnotify=<cmd>
 
 # Send transactions with full-RBF opt-in enabled (RPC only, default: 1)
@@ -455,6 +487,13 @@
 # 1000)
 #zmqpubhashtxhwm=<n>
 
+# Enable publish hash wallet transaction in <address>
+#zmqpubhashwallettx=<address>
+
+# Set publish hash wallet transaction outbound message high water mark
+# (default: 1000)
+#zmqpubhashwallettxhwm=<n>
+
 # Enable publish raw block in <address>
 #zmqpubrawblock=<address>
 
@@ -468,6 +507,13 @@
 # 1000)
 #zmqpubrawtxhwm=<n>
 
+# Enable publish raw wallet transaction in <address>
+#zmqpubrawwallettx=<address>
+
+# Set publish raw wallet transaction outbound message high water mark
+# (default: 1000)
+#zmqpubrawwallettxhwm=<n>
+
 # Enable publish hash block and tx sequence in <address>
 #zmqpubsequence=<address>
 
@@ -537,6 +583,11 @@
 # is defined by the -signetchallenge parameter
 #signet=1
 
+# Difficulty adjustment will target a block time of the given amount in
+# seconds (only for custom signet networks, must have
+# -signetchallenge set; defaults to 10 minutes)
+#signetblocktime=1
+
 # Blocks must satisfy the given script to be considered valid (only for
 # signet networks; defaults to the global default signet test
 # network challenge)
@@ -555,49 +606,78 @@
 ### Node relay options
 
 
+# Relay and mine "non-standard" transactions (default: 0 or testnet: 1)
+#acceptnonstdtxn=1
+
 # Equivalent bytes per sigop in transactions for relay and mining
 # (default: 20)
 #bytespersigop=1
 
+# Minimum bytes per sigop in transactions we relay and mine (default: 20)
+#bytespersigopstrict=1
+
 # Relay and mine data carrier transactions (default: 1)
 #datacarrier=1
 
+# Treat extra data in transactions as at least N vbytes per actual byte
+# (default: 1)
+#datacarriercost=1
+
 # Maximum size of data in data carrier transactions we relay and mine
-# (default: 83)
+# (default: 42)
 #datacarriersize=1
 
+# Maximum size of scripts we relay and mine (default: 1650)
+#maxscriptsize=1
+
 # Accept transaction replace-by-fee without requiring replaceability
-# signaling (default: 0)
+# signaling (default: 1)
 #mempoolfullrbf=1
 
+# Set to 0 to disable RBF entirely, "fee,optin" to honour RBF opt-out
+# signal, or "fee,-optin" to always RBF aka full RBF (default:
+# fee,optin)
+#mempoolreplacement=1
+
 # Fees (in BTC/kvB) smaller than this are considered zero fee for
 # relaying, mining and transaction creation (default: 0.00001)
 #minrelaytxfee=<amt>
 
-# Relay non-P2SH multisig (default: 1)
+# Relay non-P2SH multisig (default: 0)
 #permitbaremultisig=1
 
-# Add 'forcerelay' permission to whitelisted inbound peers with default
+# Accept transactions reusing addresses or other pubkey scripts (default:
+# allow)
+#spkreuse=1
+
+# Add 'forcerelay' permission to whitelisted peers with default
 # permissions. This will relay transactions even if the
 # transactions were already in the mempool. (default: 0)
 #whitelistforcerelay=1
 
-# Add 'relay' permission to whitelisted inbound peers with default
-# permissions. This will accept relayed transactions even when not
-# relaying transactions (default: 1)
+# Add 'relay' permission to whitelisted peers with default permissions.
+# This will accept relayed transactions even when not relaying
+# transactions (default: 1)
 #whitelistrelay=1
 
 
 ### Block creation options
 
 
-# Set maximum BIP141 block weight (default: 3996000)
+# Set maximum block size in bytes (default: 300000)
+#blockmaxsize=<n>
+
+# Set maximum BIP141 block weight (default: 1500000)
 #blockmaxweight=<n>
 
 # Set lowest fee rate (in BTC/kvB) for transactions to be included in
 # block creation. (default: 0.00001)
 #blockmintxfee=<amt>
 
+# Set maximum size of high-priority/low-fee transactions in bytes
+# (default: 100000)
+#blockprioritysize=<n>
+
 
 ### RPC server options
 
@@ -619,6 +699,10 @@
 # option can be specified multiple times
 #rpcauth=<userpw>
 
+# A file with a single lines with same format as rpcauth. This option can
+# be specified multiple times
+#rpcauthfile=<userpw>
+
 # Bind to given address to listen for JSON-RPC connections. Do not expose
 # the RPC server to untrusted networks such as the public internet!
 # This option is ignored unless -rpcallowip is also passed. Port is
@@ -631,6 +715,10 @@
 # net-specific datadir location. (default: data dir)
 #rpccookiefile=<loc>
 
+# Set the permissions on the RPC auth cookie file to the specified octal
+# value (default: 0600)
+#rpccookieperms=<octal>
+
 # Password for JSON-RPC connections
 #rpcpassword=<pw>
 
@@ -667,6 +755,16 @@
 #server=1
 
 
+### Statistic options
+
+
+# Enable statistics (default: 0)
+#statsenable=1
+
+# Set the memory limit target for statistics in bytes (default: 10485760)
+#statsmaxmemorytarget=<n>
+
+
 # [Sections]
 # Most options will apply to all networks. To confine an option to a specific
 # network, add it under the relevant section below.